Audio repair: remove background noise, hum and clicks from a recording

Clean up a recording in your browser: reduce hiss and fan noise from a noise sample, notch out 50 or 60 Hz mains hum, repair clicks and clipped peaks. Hear before and after, save WAV or MP3. Nothing is uploaded.

Keep it one tap away for everyday use.

Bookmark Audio repair?

Press Ctrl + D now. Your browser opens its own bookmark box, where you choose the name and folder.

Or install fibub as an app: every tool you open then works offline.

  1. Open sound
  2. Pick noise
  3. Repair
  4. Save
Nothing is uploadedWorks offline once open
Or drop it here. MP3, WAV, M4A, FLAC, OGG, up to 30 minutes. It stays on this device.
More options

Smoothing averages the noise reduction over nearby moments and pitches so it does not twinkle. Harmonics are the hum's overtones (100, 150, 200 Hz and so on for 50 Hz hum). Narrow notches take out less music; wide ones catch hum that wanders.

What it does

Audio repair cleans the common faults in home, phone and live recordings: steady background noise (hiss, fans, air conditioning), mains hum (the low 50 or 60 Hz buzz from cables and power supplies), clicks and crackle (vinyl, bad cables, mouth clicks) and clipped peaks (flattened tops from recording too loud). It runs in your browser, so the recording is never uploaded. Before cleaning, cut the part you need with the audio trimmer; afterwards, set the level with the loudness normaliser or pull a song apart with the stem splitter.

How to use it

  1. Press Open a recording. The quietest half second is marked on the waveform as the noise sample.
  2. If that part has music or speech in it, drag across a part with only background noise.
  3. Tick the repairs you want and press Repair. Cancel stops it.
  4. Press Play and switch between Before and After; the place in the recording is kept. Compare the two spectrograms.
  5. Press Save the repaired file.

What each setting does

  • Reduce noise by up to: the most any sound is turned down. More is quieter but can sound hollow.
  • Noise smoothing: averages the reduction over nearby moments so it does not twinkle (“musical noise”).
  • Mains frequency: found for you, or set 50 Hz or 60 Hz.
  • Hum harmonics: how many overtones (100, 150, 200 Hz…) are notched as well.
  • Notch width: narrow takes out less music; wide catches hum that wanders.
  • Click sensitivity: how far a sample must stray from what the sound around it predicts to count as a click.
  • Repair clipped peaks: redraws flattened tops as smooth curves, then turns the file down a little so they fit.

Worked example

A 4-second test with a 1 kHz tone, light hiss and 50 Hz hum: the tool finds the hum at 50 Hz, the 8 notches take it down by more than 30 dB, the hiss drops by over 10 dB and the tone stays within 1 dB.

FAQs

Can it remove voices, music or traffic? No. It removes steady noise and hum. Changing sounds are left alone.

Why does speech sound watery after? Too much reduction. Lower the amount or raise the smoothing.

Is my recording uploaded? No. Everything runs on your device.

Where the numbers come from

  • Noise reduction: S. F. Boll, "Suppression of acoustic noise in speech using spectral subtraction", IEEE Trans. Acoustics, Speech and Signal Processing 27(2), 1979; over-subtraction and a gain floor after M. Berouti, R. Schwartz and J. Makhoul, ICASSP 1979.
  • Hum notches: R. Bristow-Johnson, "Cookbook formulae for audio EQ biquad filter coefficients" (Audio EQ Cookbook). Mains frequency by country: IEC World Plugs (iec.ch), checked 2026-11-18.
  • Clicks: autoregressive detection and interpolation as described in S. J. Godsill and P. J. W. Rayner, Digital Audio Restoration, Springer, 1998. The code is fibub's own.

Standard scientific values, such as constants, atomic weights and melting points, are facts found in every textbook; we name where ours were checked. If you are an author or publisher and want a value, a credit or a table changed or removed, tell us and we will act quickly.

Last updated 2026-11-18.

Change log for Audio repair

  1. Give the DJ and music tools their own order numbers; run the music engine checks in npm test Details on GitHub
  2. Add Stem splitter (#T1014) and Audio repair (#T1020) with shared STFT, separation and repair DSP Details on GitHub

Every change to fibub

Related tools

Audio spectrum analyser #T675 See the frequencies in a sound: a live spectrum and scrolling spectrogram from your microphone, or the averaged spectrum of an audio file, with the strongest peaks found to a fraction of a hertz and named as musical notes. Choose the FFT size and window, and download the spectrum as CSV. The sound stays on your device. Audio trimmer #T923 Open a sound file, drag or type the start and end, add a fade in or out, normalise the volume and save the part you keep as a WAV file. Nothing is uploaded. Loudness normaliser #T960 Measure a song, podcast or video sound track in LUFS (ITU-R BS.1770, EBU R 128) with loudness range and true peak, then save a copy at -14, -16, -23 LUFS or your own target. Nothing is uploaded. Stem splitter #T1014 Split a song into vocals and instrumental, drums and melodic parts, or bass and the rest with classic signal maths. Preview each stem with solo and mute, save WAV or MP3. Nothing is uploaded. Track mastering #T1017 Master a finished mix in your browser: gentle tone EQ, glue compression, stereo width and a true-peak limiter that lands on −14, −16, −23 LUFS or a loud club level. Compare before and after at matched loudness, then save WAV or MP3. Nothing is uploaded. Pitch editor #T1019 Open a solo vocal or instrument, see every note on a piano roll, snap the notes to a key with a strength and retune time, or drag single notes up and down. Compare before and after, then save a WAV of the same length. Nothing is uploaded.