A/B compare: compare your mix with reference tracks at matched loudness

Load your mix and up to 3 reference tracks, match their loudness automatically (ITU-R BS.1770), switch between them in sync with keys 1 to 4, loop a part, run a blind test and compare spectra, LUFS, range, true peak, correlation and crest factor. Nothing is uploaded.

Keep it one tap away for everyday use.

Bookmark A/B compare?

Press Ctrl + D now. Your browser opens its own bookmark box, where you choose the name and folder.

Or install fibub as an app: every tool you open then works offline.

  1. Open mix
  2. Add refs
  3. Match
  4. Compare
Nothing is uploadedWorks offline once open
Your mix plus 1 to 3 references. Files stay on this device.

What it does

Comparing your mix with a finished record you like is the quickest way to hear what is missing. The catch is that the louder track almost always sounds better, so this tool measures every track by the ITU-R BS.1770 method and plays them all at the level of the quietest one. They play together in sync, so pressing 1, 2, 3 or 4 swaps what you hear at the same place in the song. It runs in your browser, so nothing is uploaded.

To fix what you find, go to track mastering; to check the stereo image of your mix, open it in the phase checker.

How to use it

  1. Press Open your mix, then Add reference tracks (1 to 3, from your own files).
  2. Press Play and switch with the buttons or keys 1 to 4.
  3. To repeat a chorus, type its start and end and tick Loop this part.
  4. For an honest opinion, press Blind test: the buttons are shuffled and named only by number until you press Reveal.

What each number means

  • Loudness: integrated loudness in LUFS.
  • Played at: the level change used to match it to the quietest track.
  • Range: loudness range in LU; small numbers mean a heavily compressed track.
  • True peak: the highest point between samples, in dBTP.
  • Correlation: +1 is mono, near 0 is very wide, below 0 cancels in mono.
  • Crest: peak over average level in dB. Heavily limited masters have a lower crest factor than dynamic ones.
  • Average spectrum: each track’s tone over its whole length, shifted by its match, so a line that sits higher in the bass really has more bass.

Worked example

Your mix is a steady 1 kHz test tone at −20 dBFS in both channels: it measures −20.0 LUFS, a true peak of −20.0 dBTP, correlation +1.00 and a crest factor of 3.0 dB (the value for any sine). A reference of the same tone at −10 dBFS measures −10.0 LUFS, so it plays 10.0 dB quieter and the two sound equally loud.

FAQs

Why match loudness? Our ears hear a louder version as fuller and brighter. Matching takes level out of the decision.

Is anything uploaded? No. Your mix and the references stay on this device.

Where the numbers come from

  • Loudness, loudness range and true peak by ITU-R BS.1770-4 and EBU Tech 3342 (gated integrated loudness, 4x oversampled true peak). Spectrum: Hann-windowed FFT averaged over the track. Crest factor is sample peak over RMS. Drawings are fibub's own.

Standard scientific values, such as constants, atomic weights and melting points, are facts found in every textbook; we name where ours were checked. If you are an author or publisher and want a value, a credit or a table changed or removed, tell us and we will act quickly.

Last updated 2026-11-18.

Change log for A/B compare

  1. Give the DJ and music tools their own order numbers; run the music engine checks in npm test Details on GitHub
  2. A/B compare (#T1044) Details on GitHub

Every change to fibub

Related tools

Audio spectrum analyser #T675 See the frequencies in a sound: a live spectrum and scrolling spectrogram from your microphone, or the averaged spectrum of an audio file, with the strongest peaks found to a fraction of a hertz and named as musical notes. Choose the FFT size and window, and download the spectrum as CSV. The sound stays on your device. Loudness normaliser #T960 Measure a song, podcast or video sound track in LUFS (ITU-R BS.1770, EBU R 128) with loudness range and true peak, then save a copy at -14, -16, -23 LUFS or your own target. Nothing is uploaded. Track mastering #T1017 Master a finished mix in your browser: gentle tone EQ, glue compression, stereo width and a true-peak limiter that lands on −14, −16, −23 LUFS or a loud club level. Compare before and after at matched loudness, then save WAV or MP3. Nothing is uploaded. Phase checker #T1043 Check a mix for phase problems: correlation over time, a goniometer, correlation by band, how much quieter it gets in mono, left/right balance and flagged out-of-phase moments. Listen in stereo, mono or side only. Nothing is uploaded. Stem splitter #T1014 Split a song into vocals and instrumental, drums and melodic parts, or bass and the rest with classic signal maths. Preview each stem with solo and mute, save WAV or MP3. Nothing is uploaded. Pitch editor #T1019 Open a solo vocal or instrument, see every note on a piano roll, snap the notes to a key with a strength and retune time, or drag single notes up and down. Compare before and after, then save a WAV of the same length. Nothing is uploaded.