Binding energy and the semi-empirical mass formula
Nuclear physics · 72 questions and templates for CSIR NET Physics, in order from warm-up to top rank. Check each answer, then read the full solution.
Loading questions… (they need JavaScript; nothing you type is sent anywhere)
Written questions with solutions
The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.
-
MCQWarm-up
Which term of the semi-empirical mass formula, proportional to , expresses the saturation of nuclear forces?- the surface term
- the Coulomb term
- the volume term
- the asymmetry term
Answer and solution
Answer: C
If every nucleon is bound only to its few nearest neighbours (short-range, saturating forces), each contributes the same binding, so : the volume term . If every nucleon attracted every other, would grow like .Why people get this wrong: The surface term grows as and reduces the binding.
-
MCQWarm-up
The surface term in the mass formula reflects that- nucleons on the surface have fewer neighbours to bind with, and the number of them grows as the area,
- protons repel at the surface
- the surface is made only of neutrons
- surface nucleons move faster than the speed of light
Answer and solution
Answer: A
The volume term over-counts: a nucleon at the surface has neighbours on one side only. The deficit is proportional to the number of surface nucleons, that is to the area . It is the nuclear version of surface tension.Why people get this wrong: Coulomb repulsion has its own term, depending on .
-
MCQWarm-up
The pairing term in the mass formula is- positive for every nucleus
- zero for even-even nuclei
- negative for odd- nuclei
- positive for even-even, zero for odd- and negative for odd-odd nuclei
Answer and solution
Answer: D
Two like nucleons in the same orbit coupled to gain extra binding. Even-even nuclei have all nucleons paired (), odd- nuclei one unpaired (), and odd-odd nuclei one unpaired proton and one unpaired neutron ( relative to the average). A common size is MeV.Why people get this wrong: The reference is odd , not even-even.
-
NATWarm-up
The binding energies of C and C are MeV and MeV. The neutron separation energy of C is ______ MeV (to three decimal places).Answer and solution
Answer: 4.946 MeV (±0.002)
Removing a neutron from C leaves C. MeV, well below the average MeV because the extra neutron sits alone in a new orbit.Why people get this wrong: Taking of C as the energy to remove one nucleon.
-
MCQWarm-up
The mass excess is zero by definition for- H
- C
- O
- Fe
Answer and solution
Answer: B
The atomic mass unit is defined as one twelfth of the mass of a neutral C atom, so u exactly and . H has MeV, Fe MeV. Tables list because differences of give Q values directly when balances.Why people get this wrong: The unit is not based on hydrogen or oxygen (older chemistry scales used oxygen).
-
MCQWarm-up
The asymmetry term originates mainly from- Coulomb repulsion between protons
- the surface tension of the nucleus
- the Pauli exclusion principle: with one kind of nucleon must fill higher levels
- the magnetic moments of the nucleons
Answer and solution
Answer: C
Protons and neutrons fill separate ladders of levels. Moving nucleons from one ladder to the other to make puts them into higher, emptier levels and costs kinetic energy (plus some potential energy, since the force is the most attractive). The Fermi gas gives a cost .Why people get this wrong: Coulomb pushes towards ; the asymmetry term pushes back towards .
-
MCQWarm-up
For which of these nuclei is the asymmetry term of the mass formula exactly zero?- Ca
- Ca
- Pb
- Fe
Answer and solution
Answer: A
The asymmetry term vanishes only when . Ca has , . The others have extra neutrons: Ca (), Pb () and Fe ().Why people get this wrong: Picking a doubly magic nucleus such as Ca or Pb: being magic has nothing to do with the asymmetry term.
-
NATStandard
If nuclei are uniformly charged spheres with , fm, the Coulomb coefficient in is ______ MeV (to three decimal places). Use MeV fm.Answer and solution
Answer: 0.691 MeV (±0.002)
The electrostatic energy of a uniform sphere is ; counting only pairs of distinct protons replaces by . So MeV, close to fitted values ( to MeV).Why people get this wrong: Missing the of a uniform sphere (or using for a shell).
-
NATStandard
Atomic masses: O u, N u, H u; u MeV. The proton separation energy of O is ______ MeV (to two decimal places).Answer and solution
Answer: 12.13 MeV (±0.01)
MeV. Using the hydrogen atom (not a bare proton) keeps the electron count balanced: 8 on each side.Why people get this wrong: Using the proton mass with atomic masses leaves one electron mass ( MeV) unbalanced.
-
MCQStandard
Along a chain of isotopes, the neutron separation energy zigzags: it is larger for even than for the odd- neighbours. The main reason is- the Coulomb term
- the surface term
- the asymmetry term
- pairing: removing a neutron from an even- nucleus breaks a pair
Answer and solution
Answer: D
For even , the last neutron is paired; removing it also costs the pairing energy. For odd the last neutron is alone and comes off more easily. The Coulomb term does not change with , and the asymmetry term changes smoothly.Why people get this wrong: The asymmetry term makes fall steadily with , not zigzag.
-
MSQStandard
For a fixed mass number , which terms of the mass formula change from one isobar to another?- the volume term
- the Coulomb term
- the asymmetry term
- the pairing term
Answer and solution
Answer: B, C, D
Volume and surface depend only on . The Coulomb term depends on , the asymmetry term on , and the pairing term on whether (and so ) is even or odd. These three shape the mass parabolas of isobars.Why people get this wrong: Forgetting that for even changing by one switches between even-even and odd-odd.
-
MCQStandard
With MeV, the surface term reduces the binding energy per nucleon of Al by about- MeV
- MeV
- MeV
- MeV
Answer and solution
Answer: B
Per nucleon, MeV. For light nuclei this is a large fraction of the volume term (about 16 MeV); it is the main reason light nuclei are less bound per nucleon.Why people get this wrong: Dividing by twice, or using instead of .
-
MCQStandard
For odd , the atomic masses of isobars plotted against lie on a single parabola. As a result,- there is usually exactly one beta-stable isobar
- there are always two stable isobars
- no odd- nucleus is stable
- odd- nuclei decay by double beta decay
Answer and solution
Answer: A
With every odd- isobar lies on the same parabola in . Nuclei on the low- side decay downhill, those on the high- side decay or capture electrons, and only the one nearest the minimum is stable. (Rare exceptions such as have a near-degenerate pair with one decaying extremely slowly.)Why people get this wrong: Two parabolas, and so possibly two or three stable isobars, belong to even .
-
MCQStandard
Along the stability line the binding energy per nucleon falls slowly beyond . In the mass formula this is because- the surface term per nucleon grows with
- the Coulomb energy per nucleon grows roughly as
- the volume term decreases
- the pairing term becomes negative
Answer and solution
Answer: B
Per nucleon, the surface term shrinks with , which makes rise for light nuclei. The Coulomb term per nucleon with grows as and wins for heavy nuclei (helped by the asymmetry term as grows). The maximum is where the two slopes balance.Why people get this wrong: The surface term per nucleon decreases with ; it explains the rise, not the fall.
-
NATStandard
Binding energies: O MeV, O MeV. The two-neutron separation energy of O is ______ MeV (to three decimal places).Answer and solution
Answer: 12.188 MeV (±0.002)
MeV. is smooth along a chain because it removes a whole pair, so it is the preferred quantity for spotting shell closures.Why people get this wrong: Halving it gives the average per neutron, not the separation energy asked for.
-
MCQStandard
The fitted volume coefficient MeV, but no nucleus has above MeV. Why?- is measured for neutron stars only
- nuclei are not saturated
- the surface, Coulomb and asymmetry terms together take away roughly 7 to 8 MeV per nucleon
- the pairing term is always negative
Answer and solution
Answer: C
is the binding per nucleon of infinite, symmetric nuclear matter without Coulomb forces. In a real nucleus near : surface about , Coulomb about , asymmetry about MeV per nucleon, leaving about MeV.Why people get this wrong: Pairing is a small correction of order MeV in total, not per nucleon.
-
NATStandard
With MeV, the Coulomb term for Fe () is ______ MeV (to one decimal place).Answer and solution
Answer: 121.3 MeV (±0.2)
, . MeV, about 2.2 MeV per nucleon of the total binding MeV.Why people get this wrong: Using in the denominator.
-
MSQStandard
Judging from the binding energy per nucleon curve, which processes release energy?- two nuclei with
Answer and solution
Answer: A, C
Energy is released when the products have a larger total binding: moving towards the peak near . Deuterium fusion (1.11 to 7.07 MeV per nucleon) and uranium fission (7.6 to about 8.5) do. Splitting iron or fusing two irons moves away from the peak and absorbs energy.Why people get this wrong: Fusion is not always exothermic: beyond iron it costs energy.
-
MSQStandard
For EVERY nucleus that is stable (in its ground state), which of these quantities must be positive?- The neutron separation energy
- The proton separation energy
- The mass excess
- The total binding energy
Answer and solution
Answer: A, B, D
If or were negative, the nucleus could emit a neutron or a proton spontaneously and would not be stable (it would sit beyond a drip line). for any bound nucleus, otherwise it would fall apart into free nucleons. The mass excess compares the atomic mass with atomic mass units, which is a bookkeeping choice: many stable nuclides (for example O, Fe, Pb) have negative while light and very heavy ones have positive .Why people get this wrong: Treating the mass excess as a kind of binding energy; its sign carries no information about stability.
-
NATExam level
Minimising the mass formula over at fixed (neglecting the -H mass difference and using for ) gives . With MeV and MeV, the most stable isobar with has = ______ (nearest integer).Answer and solution
Answer: 52
; . , so (tellurium; Te is indeed stable).Why people get this wrong: Taking : the Coulomb term pushes heavy nuclei to .
-
MCQExam level
For even , the isobars lie on two parabolas separated by . A consequence is that- odd-odd nuclei are always stable
- even-even nuclei always -decay
- only one isobar can be stable for each even
- many odd-odd nuclei (such as Cu and K) can decay both by and by /electron capture, to two different even-even neighbours
Answer and solution
Answer: D
Odd-odd isobars sit on the upper parabola. An odd-odd nucleus near the bottom has both even-even neighbours below it, so both decays are open: Cu goes 39% to Zn and 61% EC/ to Ni. On the lower parabola there can be two (occasionally three) stable even-even isobars.Why people get this wrong: Only four light odd-odd nuclei (H, Li, B, N) are stable.
-
NATExam level
A nucleus with , splits into two identical halves (, ). Keeping only the surface and Coulomb terms, with MeV, MeV and in place of , the energy released is ______ MeV (to the nearest MeV).Answer and solution
Answer: 180 MeV (±2)
Volume and asymmetry terms are unchanged by a symmetric split (both linear in and ). Surface: MeV becomes , an increase of MeV. Coulomb: MeV becomes , a decrease of MeV. MeV.Why people get this wrong: Forgetting that each fragment has half the charge: the Coulomb energy of each is , not .
-
MSQExam level
In the liquid-drop picture of fission, which statements are correct?- A small deformation raises the surface energy and lowers the Coulomb energy
- A drop becomes unstable against any small deformation when , that is
- For uranium, , so a fission barrier of a few MeV remains
- The fission barrier grows as grows
Answer and solution
Answer: A, B, C
For a spheroid with small deformation : , , so . It is negative (no barrier) when , i.e. . Uranium () is below, with a barrier of about 6 MeV; the barrier shrinks as grows.Why people get this wrong: The barrier falls, not rises, with ; that is why superheavy nuclei fission spontaneously.
-
MCQExam level
With MeV and MeV (and for the Coulomb term), the liquid drop loses all resistance to small deformations when exceeds aboutAnswer and solution
Answer: B
Condition : , so . (18 is where symmetric fission first releases energy; 36 is uranium; 25.6 is .)Why people get this wrong: for fission (about ) is not the same as having no barrier.
-
MCQExam level
Using , the beta-stable isobar with has equal to (Xe 54, Cs 55, Ba 56, La 57)- (Xe)
- (Cs)
- (Ba)
- (La)
Answer and solution
Answer: C
; . For odd the one isobar nearest the minimum is stable: Ba. Xe and Cs decay towards it, La captures electrons.Why people get this wrong: Rounding or forgetting the dependence.
-
NATExam level
For odd , . With the mass formula (, MeV, Coulomb) and MeV, for , is ______ MeV (to two decimal places).Answer and solution
Answer: 5.27 MeV (±0.03)
Volume, surface and (odd ) pairing cancel. Coulomb: MeV. Asymmetry: MeV. MeV (the measured value for I is MeV: the formula is rough this far from the minimum).Why people get this wrong: Dropping the -H mass difference, which matters whenever atomic masses are used.
-
MCQExam level
In the Fermi gas picture, why is the asymmetry energy proportional to rather than to ?- the spacing of single-particle levels near the Fermi energy shrinks as , so each transferred nucleon costs less in a bigger nucleus
- the Coulomb energy cancels part of it
- the surface grows as
- the nuclear force weakens with distance
Answer and solution
Answer: A
Moving nucleons from one ladder to the other raises each by about level spacings , a total of . With (more levels below a fixed in a bigger nucleus), the cost is .Why people get this wrong: Thinking of it as an interaction between all pairs, which would give a different dependence.
-
NATExam level
Three neighbouring isotopes of an element have binding energies MeV, MeV ( even) and MeV. The neutron pairing gap is ______ MeV (to two decimal places).Answer and solution
Answer: 1.5 MeV (±0.01)
MeV, MeV. MeV, close to for ; for real heavy nuclei it is about 1 MeV.Why people get this wrong: Forgetting the factor : the zigzag in is twice the gap.
-
MCQExam level
The mass formula with standard coefficients predicts MeV for He, while the measured value is MeV. The best explanation is- the Coulomb term is wrong for
- He is a doubly closed (doubly magic) system of two protons and two neutrons in the lowest orbit, an effect outside the liquid-drop model
- the volume coefficient is larger for light nuclei
- the pairing term is negative for He
Answer and solution
Answer: B
The liquid drop has no shells. He fills the level for both protons and neutrons, and its tight binding (with MeV) is a shell effect. The same extra binding at magic numbers (O, Ca, Pb) motivates the shell model.Why people get this wrong: Pairing is already positive for He and is far too small to explain 8 MeV of extra binding.
-
MSQExam level
Which statements about separation energies are correct?- drops sharply for the first neutron added beyond a magic number
- Towards neutron-rich isotopes falls towards zero, which defines the neutron drip line
- is always larger than in the same nucleus
- For an odd- nucleus is usually smaller than for its even- neighbours
Answer and solution
Answer: A, B, D
After a shell closure the next neutron goes into a new, higher shell, so jumps down (Pb 7.37 MeV, Pb 3.94 MeV). Adding neutrons raises the neutron Fermi level until (drip line). Pairing makes odd- values smaller. is smaller than on the proton-rich side (B has MeV), so statement three fails.Why people get this wrong: Coulomb repulsion helps remove protons; on the proton-rich side is the smaller one.