Home / Courses / CSIR NET Physics / Practice / Crystal structure, lattices and Miller indices

Crystal structure, lattices and Miller indices

Solid state physics and devices · 7 questions and templates for CSIR NET Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQExam level

    The reciprocal lattice of an fcc lattice with conventional cube edge a is
    1. fcc with cube edge 4π/a
    2. simple cubic with cube edge 2π/a
    3. bcc with cube edge 2π/a
    4. bcc with cube edge 4π/a
    Answer and solution

    Answer: D

    With a→1=a2(0,1,1) and its partners, b→1=2πa→2×a→3a→1⋅(a→2×a→3)=2πa(−1,1,1), and similarly b→2=2πa(1,−1,1), b→3=2πa(1,1,−1). These are the primitive vectors of a bcc lattice, A2(±1,±1,±1), with A/2=2π/a, so the bcc cube edge is A=4π/a.

    Why people get this wrong: Getting bcc right but the edge wrong: the vectors 2πa(±1,±1,±1) reach the body centre, which is half the cube edge along each axis.

  2. MSQHard

    Which statements about the reciprocal lattice (defined with a→i⋅b→j=2πδij) are correct?
    1. The reciprocal lattice vector G→=hb→1+kb→2+lb→3 is perpendicular to the (hkl) planes.
    2. For coprime h,k,l, |G→hkl|=2π/dhkl.
    3. The volume of the reciprocal primitive cell is (2π)3/Vc, where Vc is the volume of the direct primitive cell.
    4. The reciprocal of the reciprocal lattice is the direct lattice scaled by (2π)2.
    Answer and solution

    Answer: A, B, C

    Perpendicular: true. The plane (hkl) contains a→1/h−a→2/k and a→2/k−a→3/l, and G→ dotted with each gives 2π−2π=0. 2π/d: true: d is the distance from the origin to the plane through a→1/h, which is Gˆ⋅a→1/h=2π/|G→|. (2π)3/Vc: true: b→1⋅(b→2×b→3)=(2π)3/Vc. Scaled by (2π)2: false. Applying the same definition twice gives back exactly the direct lattice: the 2π factors cancel because a→i⋅b→j=2πδij is symmetric in the two sets.

    Why people get this wrong: The 2π convention makes the reciprocal of the reciprocal exactly the original lattice, with no extra factor.

  3. NATTop rank

    In a bcc array of identical touching spheres of radius r, an octahedral interstitial site lies at a face centre, (12,12,0)a. The radius of the largest small sphere that fits there, as a fraction of r, is ______ (to three decimal places).
    Answer and solution

    Answer: 0.155 (±0.002)

    From the face centre the closest atoms are the two body centres directly above and below, at distance a/2 (the four corners of the face are farther, at a/2). So the void radius is rv=a/2−r. With a=4r/3: rv=(2/3−1)r=0.155r.

    Why people get this wrong: Measuring to the face corners (a/2−r=0.633r) misses the much closer body-centre atoms. The bcc octahedral site is squashed.

  4. NATTop rank

    In the same bcc array (spheres of radius r), a tetrahedral site lies at (12,14,0)a. The radius of the largest sphere that fits there, as a fraction of r, is ______ (to three decimal places).
    Answer and solution

    Answer: 0.291 (±0.003)

    Distance to the corner (0,0,0): a14+116=54a. Distance to the body centre (12,12,12)a: a0+116+14=54a, the same, as it should be for the centre of a tetrahedron. So rv=54a−r with a=4r/3: rv=(53−1)r=0.291r. Surprisingly, in bcc the tetrahedral site is larger than the octahedral one (0.155r), the reverse of fcc.

    Why people get this wrong: Carrying over the fcc value 0.225r: the bcc tetrahedron is irregular and roomier.

  5. MSQTop rank

    Take a centred cubic lattice with conventional cube edge a and look at the actual spacing between neighbouring planes of lattice points. Which statements are correct?
    1. In fcc, the lattice planes parallel to (100) are a/2 apart.
    2. In fcc, the lattice planes parallel to (111) are a/3 apart.
    3. In fcc, the lattice planes parallel to (110) are a/2 apart.
    4. In bcc, the lattice planes parallel to (100) are a/2 apart.
    Answer and solution

    Answer: A, B, D

    The formula a/h2+k2+l2 uses the conventional cube, but centring adds planes in between. fcc (100): face centres sit at z=a/2, so planes are a/2 apart (true). fcc (111): fcc points have coordinates that are multiples of a/2 with an even sum in those units, so x+y+z takes only the values 0,a,2a,… and the planes x+y+z= const are a/3 apart (true). fcc (110): x+y takes the values 0,a/2,a,… (from points like (12,0,12)a), so the spacing is a/22=a/(22), not a/2 (false). bcc (100): the body centre adds a plane at z=a/2 (true). This is the geometric reason why some reflections are missing in X-ray diffraction: the first-order (100) reflection of bcc is cancelled by the extra plane halfway.

    Why people get this wrong: Applying the cubic formula blindly. It is correct for simple cubic only; centring can halve the true spacing.

  6. MCQTop rank

    A tetragonal crystal has a=b=3 Å and c=6 Å. The crystal direction [uvw] that is normal to the (111) plane is
    1. [111]
    2. [221]
    3. [112]
    4. [441]
    Answer and solution

    Answer: D

    The plane (111) cuts the axes at a=3, b=3 and c=6 Å, so in Cartesian form it is x/3+y/3+z/6=1. Its normal is the gradient of the left side, (13,13,16)∝(2,2,1). A crystal direction [uvw] is the Cartesian vector (ua,vb,wc)=(3u,3v,6w). Setting (3u,3v,6w)∝(2,2,1) gives u:v:w=23:23:16=4:4:1, so the normal is [441]. Check: (12,12,6)∝(2,2,1).

    Why people get this wrong: In a non-cubic crystal [111] is not normal to (111); the indices of the normal direction depend on c/a.

  7. MSQTop rank

    Which statements are correct?
    1. A periodic crystal can have an 8-fold rotation axis.
    2. Quasicrystals give sharp diffraction spots with 5-fold or 10-fold symmetry but have no translational periodicity.
    3. There are exactly 5 Bravais lattices in two dimensions.
    4. The centred square lattice is a sixth two-dimensional Bravais lattice.
    Answer and solution

    Answer: B, C

    8-fold: false. Only 1, 2, 3, 4 and 6-fold axes are compatible with translations. Quasicrystals: true. They are ordered (hence sharp spots) without repeating, which allows symmetries a lattice cannot have. 5 in 2D: true: oblique, rectangular, centred rectangular, square, hexagonal. Centred square: false. A centred square is just a smaller square lattice turned by 45∘, with side a/2.

    Why people get this wrong: Centring sometimes gives nothing new: centred square is square, base-centred cubic is tetragonal.

← All topics · Timed mock test →