Fourier and Laplace transforms
Mathematical methods · 70 questions and templates for CSIR NET Physics, in order from warm-up to top rank. Check each answer, then read the full solution.
Loading questions… (they need JavaScript; nothing you type is sent anywhere)
Written questions with solutions
The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.
-
MCQWarm-up
The Laplace transform of (for ) isAnswer and solution
Answer: A
, which converges only when .Why people get this wrong: The sign: gives .
-
NATWarm-up
If is the Laplace transform of , the value of is ______.Answer and solution
Answer: 0.25 (±0.001)
, so and .Why people get this wrong: Forgetting the factorial gives .
-
MCQWarm-up
The Laplace transform of isAnswer and solution
Answer: B
and . Imaginary part: . (The real part, , is for .)Why people get this wrong: Mixing up sine and cosine: sine has on top, so like , matching near .
-
MCQWarm-up
With , the Fourier transform of isAnswer and solution
Answer: C
The delta function picks out the integrand at : . A spike in contains every with equal strength; only the phase depends on where the spike is.Why people get this wrong: The sign of the exponent follows the convention; with in the definition you would get .
-
MCQWarm-up
The Fourier transform of a Gaussian is- a Lorentzian
- a sinc function
- a decaying exponential
- a Gaussian
Answer and solution
Answer: D
Completing the square in the exponent gives (with ): again a Gaussian, of width .Why people get this wrong: The Lorentzian is the transform of ; the sinc is the transform of a rectangle.
-
NATWarm-up
The Laplace transform of , evaluated at , is ______ (to three decimal places).Answer and solution
Answer: 0.111 (±0.002)
Shift rule: . With : . At : .Why people get this wrong: The exponential shifts to (not ) for a decaying factor.
-
NATStandard
The rectangular pulse for and otherwise is transformed. Use . The smallest positive at which is ______ (to two decimal places).Answer and solution
Answer: 1.57 (±0.01)
. It first vanishes where : . A wider pulse has its first zero nearer the origin: narrower spectrum.Why people get this wrong: Using the full width 4 instead of the half-width 2 gives .
-
MCQStandard
With , the transform of the shifted function isAnswer and solution
Answer: B
Substitute : . Shifting in only changes the phase; is unchanged.Why people get this wrong: is the transform of : a shift in , not in .
-
MSQStandard
With , and the unit step, which rules are correct?- for
Answer and solution
Answer: A, C, D
Differentiating with respect to brings down . Multiplying by replaces by . Delaying by multiplies by . A product of transforms corresponds to the convolution , not to the product .Why people get this wrong: Products in one domain are convolutions in the other.
-
NATStandard
If , the value of is ______ (to three decimal places).Answer and solution
Answer: 0.865 (±0.003)
Partial fractions: , so and . (It is the step response of a first-order system.)Why people get this wrong: Getting the sign of the second fraction wrong gives , which does not start at 0.
-
MCQStandard
With , the transform of () isAnswer and solution
Answer: C
Split at 0: , a Lorentzian. Check: ✓.Why people get this wrong: is only the half (the transform of ).
-
NATStandard
The Laplace transform of , evaluated at , is ______ (to two decimal places).Answer and solution
Answer: 0.6 (±0.01)
, so . At : .Why people get this wrong: Using (the cosine formula) gives .
-
MCQStandard
For with , the Laplace transform isAnswer and solution
Answer: D
, so and , i.e. .Why people get this wrong: Dropping the initial value from loses the 3.
-
MCQStandard
With and at , the transform of isAnswer and solution
Answer: A
Integrate by parts: . Derivatives become multiplication by , which is why the Fourier transform turns linear ODEs with constant coefficients into algebra (and why is in momentum space).Why people get this wrong: The sign follows the convention: with it would be .
-
MSQStandard
With , which statements are true?- For every complex , is an even function of
- If is real and even, is real and even
- If is real and odd, is purely imaginary and odd
- If is real,
Answer and solution
Answer: B, C, D
For real , conjugating gives . Even : only survives, real and even. Odd : only survives, imaginary and odd. But a complex such as has a spectrum centred at , not symmetric.Why people get this wrong: The symmetry needs real.
-
NATStandard
If , then is ______.Answer and solution
Answer: 1
The final value theorem applies because the other poles (, ) are in the left half-plane. .Why people get this wrong: The theorem fails if has poles on the imaginary axis or to the right (for example for ).
-
NATExam level
For , use . The value of is ______ (to two decimal places).Answer and solution
Answer: 6.28 (±0.01)
Parseval (Plancherel) in this convention: . Here , so the answer is . (Directly: ✓.)Why people get this wrong: Forgetting the that comes with the non-symmetric convention.
-
NATExam level
Let for and otherwise. The convolution at is ______ (to two decimal places).Answer and solution
Answer: 1.5 (±0.01)
The integrand is 1 where both and , i.e. on the overlap of and , of length for . At : . The convolution of two boxes is a triangle; its transform is the square of the box's transform, .Why people get this wrong: Convolution is the overlap area as one box slides past the other, not the product of the boxes.
-
MCQExam level
A Gaussian has transform . ThenAnswer and solution
Answer: B
Completing the square: , so and . The probability densities and have widths and , whose product gives .Why people get this wrong: Squeezing a function in spreads its transform in ; they never shrink together.
-
NATExam level
Solve with , by Laplace transform. The value of is ______ (to three decimal places).Answer and solution
Answer: 0.6 (±0.003)
and . So and . Hence and . Check: , ✓.Why people get this wrong: The term also carries ; missing it gives .
-
MSQExam level
Which of these functions have a Laplace transform (for all large enough )?Answer and solution
Answer: B, C
We need to converge for large . outgrows every . is integrable at 0: . is of exponential order: for . diverges logarithmically at .Why people get this wrong: Two ways to fail: growing too fast at infinity, or blowing up too strongly at .
-
MCQExam level
With , the function whose transform is isAnswer and solution
Answer: A
From the pair with : , so comes from . (By residues: for close up round : .)Why people get this wrong: Dropping the factor 2 in the pair, or the in the inverse.
-
NATExam level
The Laplace transform of , evaluated at , is ______ (to two decimal places).Answer and solution
Answer: 0.5 (±0.01)
with : . At : .Why people get this wrong: Forgetting the minus sign in gives ; a transform of a function that is positive near 0 should be positive for large .
-
MCQExam level
If , then isAnswer and solution
Answer: C
Let , so and . Then , giving . (Equivalently, and .)Why people get this wrong: Integration divides by ; differentiation multiplies.
-
NATExam level
If , the value of is ______ (to three decimal places).Answer and solution
Answer: 0.368 (±0.003)
Partial fractions: , so and . Check: and , as the fall-off of demands.Why people get this wrong: Missing the term; the coefficients must add to give no behaviour overall at large .
-
MCQExam level
With and , the transform of is- a Gaussian of width
- for and for
Answer and solution
Answer: D
Duality: the box for has inverse transform . So the sinc function transforms into the box. (This is the ideal low-pass filter.)Why people get this wrong: is the transform of the box itself, going the other way.
-
MSQExam level
With , which statements are true?- The transform of is
- The transform of a periodic function is a smooth function of
- The transform of is
Answer and solution
Answer: A, B, D
Transform-then-invert of : . The constant 1 is the inverse of . gives two spikes of weight . A periodic function contains only the harmonic wavenumbers, so its transform is a comb of delta functions, not a smooth function.Why people get this wrong: Missing the : it appears wherever the convention puts it, so track it.
-
NATExam level
The Laplace transform of ( the unit step), evaluated at , is ______ (to three decimal places).Answer and solution
Answer: 0.135 (±0.002)
Second shift theorem: with , . So ; at : .Why people get this wrong: is a ramp starting at , not ; the latter would add .
-
NATExam level
Let . Using Laplace transforms, the value of is ______ (to three decimal places).Answer and solution
Answer: 1.571 (±0.002)
, so . The inverse is (check: it vanishes with its first derivative at 0, and , the equation whose transform gives ). At : .Why people get this wrong: Multiplying the functions instead of convolving, or taking the inverse of as (that one is ).
-
MCQExam level
With , the transform of isAnswer and solution
Answer: C
The transform of is . With this sign convention, , so the transform of is . Check: is real and odd, so its transform must be purely imaginary and odd, which only the first and third options are; the sign fixes the third.Why people get this wrong: The sign depends on the convention versus ; with the answer would be .