Home / Courses / CSIR NET Physics / Practice / Gauss, Stokes and Green theorems

Gauss, Stokes and Green theorems

Mathematical methods · 15 questions and templates for CSIR NET Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. NATHard

    The flux of F→=r→r3 through the infinite plane z=1 (normal +kˆ) is kπ. Find k.
    Answer and solution

    Answer: 2

    The flux of r→/r3 through a surface is the solid angle it subtends at the origin. An infinite plane not through the origin covers half of all directions: 12(4π)=2π. Direct check: Fz=1/(s2+1)3/2, and ∫0∞2πsds(s2+1)3/2=2π.

    Why people get this wrong: 4π needs a closed surface around the origin; a plane gets only half.

  2. NATHard

    A cube is centred at the origin. The flux of rˆ/r2 through one face of the cube (outward) is kπ. Find k (to two decimal places).
    Answer and solution

    Answer: 0.67 (±0.01)

    The flux through the whole cube is 4π, and by symmetry the six faces share it equally: 4π6=2π3≈0.67π.
  3. MSQHard

    For F→=−yiˆ+xjˆx2+y2 in the plane without the origin, which are true?
    1. ∇×F→=0→ wherever F→ is defined.
    2. ∮F→⋅dl→=2π round every circle centred at the origin, taken anticlockwise.
    3. Near any point except the origin, F→=∇θ with θ the polar angle.
    4. F→ is conservative in the plane without the origin.
    Answer and solution

    Answer: A, B, C

    A: the curl vanishes for (x,y)≠0 (see the derivative check in it-021). B: on a circle of radius s, F→=ϕˆ/s and dl→=sdϕϕˆ, giving 2π. C: ∇θ=ϕˆ/s. D: false, because the circulation round the origin is 2π, not 0; θ cannot be made single-valued on a loop round the hole.

    Why people get this wrong: Zero curl means conservative only in a region without holes.

  4. NATHard

    Evaluate ∮C(ydx+zdy+xdz) round the triangle with vertices A(1,0,0), B(0,1,0), C(0,0,1), taken in the order A→B→C→A.
    Answer and solution

    Answer: -1.5 (±0.01)

    ∇×(y,z,x)=(−1,−1,−1). The vector area of the triangle, with the right-hand rule for A→B→C: 12(B→−A→)×(C→−A→)=12(−1,1,0)×(−1,0,1)=12(1,1,1). Stokes: (−1,−1,−1)⋅12(1,1,1)=−32. Check: on A→B (x=1−t, y=t, z=0) only ydx=−tdt survives, giving −12; the other two sides give the same by symmetry.

    Why people get this wrong: Taking the normal as −(1,1,1) flips the sign to +1.5.

  5. MCQHard

    Let ϕ=x2+y2−2z2. The outward flux of ∇ϕ through any closed surface is
    1. 0
    2. 2× (enclosed volume)
    3. 4π
    4. depends on where the surface is
    Answer and solution

    Answer: A

    ∮∇ϕ⋅da→=∫∇2ϕdV and ∇2ϕ=2+2−4=0: ϕ is harmonic, so the flux is zero everywhere.

    Why people get this wrong: The minus sign on 2z2 is the whole point: without it ∇2ϕ=8.

  6. NATHard

    The outward flux of F→=xz2iˆ+(x2y−z3)jˆ+(2xy+y2z)kˆ through the closed surface of the solid half-ball x2+y2+z2≤1, z≥0 is kπ. Find k (to one decimal place).
    Answer and solution

    Answer: 0.4 (±0.01)

    ∇⋅F→=z2+x2+y2=r2 (the z3 and 2xy terms do not depend on their own coordinate). Over the half-ball: 12∫01r2⋅4πr2dr=12⋅4π5=2π5=0.4π.
  7. NATHard

    The field F→=r→−a→|r→−a→|3+2(r→−b→)|r→−b→|3−3(r→−c→)|r→−c→|3 has sources at a→=(0,0,0), b→=(0,0,3) and c→=(5,0,0). Its outward flux through the sphere r=4 is kπ. Find k.
    Answer and solution

    Answer: 12

    Each term q(r→−p→)/|r→−p→|3 gives flux 4πq through a closed surface if p→ is inside and 0 if outside. Inside r=4: a→ (distance 0) and b→ (distance 3). Outside: c→ (distance 5). Flux =4π(1+2)=12π.

    Why people get this wrong: Including the −3 source gives 0; it sits at distance 5, outside the sphere.

  8. MCQHard

    For any closed surface S with outward unit normal nˆ, the vector area ∮SnˆdS is
    1. 3Vrˆ
    2. 4πnˆ
    3. 0→
    4. equal to the total area times kˆ
    Answer and solution

    Answer: C

    Dot it with an arbitrary constant vector c→: c→⋅∮nˆdS=∮c→⋅da→=∫∇⋅c→dV=0. As this holds for every c→, the vector area is zero.

    Why people get this wrong: Confusing it with ∮r→⋅da→=3V, which is a scalar.

  9. NATTop rank

    The flux of F→=r→r3 upward through the flat disc x2+y2≤3, z=1 is kπ. Find k.
    Answer and solution

    Answer: 1 (±0.01)

    The flux equals the solid angle of the disc seen from the origin. For a disc of radius a at height d: Ω=2π(1−dd2+a2). With d=1, a=3: 2π(1−12)=π. Direct: ∫032πsds(s2+1)3/2=2π[1−12].
  10. MCQTop rank

    Let C be the ellipse where the cylinder x2+y2=1 meets the plane z=x+2, traversed anticlockwise when seen from above. Then ∮C(−ydx+xdy+zdz) is
    1. 22π
    2. 2π
    3. 2π
    4. 4π
    Answer and solution

    Answer: B

    ∇×(−y,x,z)=(0,0,2). Take the flat elliptical piece of the plane. Its area is 2π and its unit normal (−1,0,1)/2 has nˆ⋅kˆ=1/2, so the flux of the curl is 2⋅12⋅2π=2π. Quicker: only the projection onto the xy-plane (the unit disc, area π) matters for a curl along kˆ. The zdz term is exact and adds nothing.

    Why people get this wrong: Multiplying 2 by the tilted area 2π without the cosine factor gives 22π.

  11. MSQTop rank

    Let S1 be the upper unit hemisphere and S2 the flat unit disc in the plane z=0; both have the unit circle as edge, and both normals point "up" (S1 outward, S2 along +kˆ). For a smooth field F→, which are always true?
    1. ∬S1(∇×F→)⋅da→=∬S2(∇×F→)⋅da→
    2. ∬S1F→⋅da→=∬S2F→⋅da→
    3. If ∇⋅F→=0, then ∬S1F→⋅da→=∬S2F→⋅da→.
    4. The outward flux of ∇×F→ through the closed surface S1∪S2 is zero.
    Answer and solution

    Answer: A, C, D

    Closed surface S1∪S2 with outward normals uses −kˆ on the disc, so its flux is Φ1−Φ2. A and D: for ∇×F→ this closed flux is ∫∇⋅(∇×F→)dV=0, so Φ1=Φ2. C: the same argument for a divergence-free F→. B: false in general; for F→=r→ the hemisphere gets 2π and the disc 0.
  12. NATTop rank

    Using A=12∮(xdy−ydx), the area enclosed by the astroid x2/3+y2/3=1 is ______ (to two decimal places).
    Answer and solution

    Answer: 1.18 (±0.01)

    Parametrise x=cos3⁡t, y=sin3⁡t, 0≤t≤2π. Then xy˙−yx˙=3cos4⁡tsin2⁡t+3sin4⁡tcos2⁡t=3sin2⁡tcos2⁡t. A=32∫02πsin2⁡tcos2⁡tdt=32⋅π4=3π8≈1.18.

    Why people get this wrong: sin2⁡tcos2⁡t=14sin2⁡2t, whose integral over 2π is π4, not π2.

  13. MCQTop rank

    For a volume V with closed boundary S (outward unit normal nˆ), ∫V(∇×F→)dV equals
    1. ∮SF→×nˆdS
    2. ∮Snˆ×F→dS
    3. ∮S(nˆ⋅F→)nˆdS
    4. 0→ always
    Answer and solution

    Answer: B

    Apply the divergence theorem to F→×c→ for a constant c→: ∇⋅(F→×c→)=c→⋅(∇×F→). So c→⋅∫∇×F→dV=∮(F→×c→)⋅nˆdS=c→⋅∮nˆ×F→dS. As c→ is arbitrary, the result is ∮nˆ×F→dS.

    Why people get this wrong: Option A has the cross product in the wrong order, which gives minus the answer.

← All topics · Timed mock test →