Home / Courses / CSIR NET Physics / Practice / Kinetic theory of gases

Kinetic theory of gases

Kinetic theory and thermodynamics · 21 questions and templates for CSIR NET Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    A fixed amount of ideal gas is held at constant volume while its absolute temperature is made four times larger. The average momentum given to the wall in one molecular collision becomes
    1. 2 times larger
    2. 4 times larger
    3. 2 times larger
    4. unchanged
    Answer and solution

    Answer: A

    The momentum given in one collision is 2mvx, proportional to a typical speed, and speeds scale as T. Quadrupling T doubles the speed, so each collision delivers twice the momentum. The collision rate also doubles (molecules arrive twice as fast), which is why the pressure, the product of the two, rises four times.

    Why people get this wrong: Answering 4 confuses the momentum per collision with the pressure, which also includes the doubled collision rate.

  2. NATStandard

    A pollen fragment of mass 1.0×10−15 kg drifts in water at 300 K. Treating its random (Brownian) motion with equipartition, its root-mean-square speed is ______ mm/s (kB=1.38×10−23 J/K).
    Answer and solution

    Answer: 3.53 (±0.04)

    Equipartition gives 12m⟨v2⟩=32kT for any particle in thermal equilibrium, however large. So vrms=3kT/m=3×1.38×10−23×300/10−15=1.24×10−5=3.53×10−3 m/s =3.53 mm/s. The fragment never moves this fast for long: collisions with water molecules reverse its velocity many times per microsecond, so the visible wandering is far slower.

    Why people get this wrong: Using kT/m (one velocity component) gives 2.04 mm/s.

  3. MCQStandard

    A vessel contains 4 g of helium (M=4 g/mol) and 16 g of oxygen (M=32 g/mol) at the same temperature. The partial pressure of helium is what fraction of the total pressure?
    1. 1/5
    2. 1/2
    3. 2/3
    4. 1/3
    Answer and solution

    Answer: C

    Each gas exerts the pressure it would alone, proportional to its number of molecules: 1 mol of helium and 16/32=0.5 mol of oxygen. The helium fraction is 1/1.5=2/3. Kinetic theory explains why: every molecule, light or heavy, has the same average translational energy 32kT, so each contributes equally to the pressure.

    Why people get this wrong: 1/5 is the mass fraction (4/20); pressure follows the number of moles, not the mass.

  4. MCQExam level

    Gas at temperature T leaks through a tiny hole into vacuum. The average kinetic energy of the molecules that come out is
    1. 52kT
    2. 2kT
    3. 32kT
    4. kT
    Answer and solution

    Answer: B

    The number crossing the hole per second with speed v is proportional to vf(v), so fast molecules are over-represented. ⟨E⟩eff=∫12mv2vf(v)dv∫vf(v)dv=12m⟨v3⟩⟨v⟩=2kT.

    Why people get this wrong: 32kT is the average inside the box. The escaping beam is weighted by speed.

  5. NATExam level

    Elementary kinetic theory gives η=13nmv‾λ for the viscosity and κ=13nmv‾λcv for the thermal conductivity, where cv is the specific heat per unit mass. Argon (M=40 g/mol, monatomic) has η=2.2×10−5 Pa s. The thermal conductivity predicted by this simple theory is ______ ×10−3 W m−1 K−1.
    Answer and solution

    Answer: 6.86 (±0.07)

    The two formulas differ only by cv, so κ=ηcv. For a monatomic gas cv=32R/M=1.5×8.314/0.040=311.8 J kg−1 K−1. Then κ=2.2×10−5×311.8=6.86×10−3 W m−1 K−1. The measured value is about 2.5 times larger (the Eucken factor), because fast molecules, which carry more energy, also travel farther between collisions; the simple model gives the right order and the right lack of pressure dependence.

    Why people get this wrong: Using the molar heat capacity 32R without dividing by M gives a number 25 times too large.

  6. MCQExam level

    A dilute gas of hard-sphere molecules in a sealed rigid container is heated from 300 K to 1200 K. Using η=13nmv‾λ, its viscosity
    1. stays the same, since n is fixed
    2. doubles
    3. becomes four times larger
    4. halves, since molecules collide more often
    Answer and solution

    Answer: B

    For hard spheres λ=1/(2πd2n), so nλ is a constant and η=13mv‾(nλ) depends only on v‾∝T. Four times the temperature gives twice the mean speed and twice the viscosity. Gases, unlike liquids, become more viscous when heated: momentum is carried across the flow by faster molecules.

    Why people get this wrong: Expecting gases to thin out like liquids when heated; in a gas momentum is carried by the molecules themselves.

  7. MSQExam level

    The pressure P of a fixed mass of ideal gas is plotted against its density ρ, once at temperature T1 and once at T2>T1. Which statements are correct?
    1. Both graphs are straight lines through the origin.
    2. The line for T2 is the steeper one.
    3. The slope of each line equals 13vrms2 at that temperature.
    4. The slope of each line equals 13v‾2, with v‾ the mean speed.
    Answer and solution

    Answer: A, B, C

    Kinetic theory gives P=13ρvrms2, and vrms2=3kT/m depends only on T. So at a fixed temperature P∝ρ: a straight line through the origin with slope 13vrms2=kT/m, steeper at higher T. The mean speed v‾ is smaller than vrms (v‾2=83πvrms2), so the last statement is wrong.

    Why people get this wrong: The pressure formula averages v2, not the square of the average speed.

  8. NATExam level

    In a gas the mean free path is 50 nm. Of the molecules that have just collided, the percentage that travel at least 120 nm before their next collision is ______ %.
    Answer and solution

    Answer: 9.07 (±0.1)

    The chance of a collision in each short stretch dx is dx/λ, independent of the distance already travelled, so the survival probability falls exponentially: P(x)=e−x/λ. Here P=e−120/50=e−2.4=0.0907, or 9.07%. The mean of this exponential distribution is λ itself, which is what "mean free path" means.

    Why people get this wrong: Assuming every molecule travels exactly λ gives 0%; free paths are spread out exponentially.

  9. MCQHard

    For a Maxwellian gas, the product ⟨v⟩⟨1/v⟩ equals
    1. 1
    2. π/4
    3. 2/π
    4. 4/π
    Answer and solution

    Answer: D

    With f(v)=4π(β/π)3/2v2e−βv2, β=m/2kT: ⟨1/v⟩=4π(β/π)3/2⋅12β=2β/π, and ⟨v⟩=2/πβ. The product is 4/π≈1.27, independent of T and m.

    Why people get this wrong: Assuming ⟨1/v⟩=1/⟨v⟩. Averages of non-linear functions are not functions of averages.

  10. MSQHard

    For molecules of mass m in a Maxwellian gas at temperature T, which of these equal kT/m?
    1. ⟨vx2⟩
    2. vmp2/2
    3. πv‾2/8
    4. ⟨|vx|⟩2
    Answer and solution

    Answer: A, B, C

    A: equipartition. B: vmp2=2kT/m. C: v‾2=8kT/πm, times π/8 gives kT/m. D: ⟨|vx|⟩=2kT/πm, so its square is 2kT/πm≈0.64kT/m.
  11. MCQHard

    Molecules of mass m move freely on a flat surface (a two-dimensional ideal gas) at temperature T. Their most probable speed is
    1. kT/m
    2. 2kT/m
    3. πkT/2m
    4. 3kT/m
    Answer and solution

    Answer: A

    In 2D the number of velocity states between v and v+dv is 2πvdv, so f(v)∝ve−mv2/2kT. Setting df/dv=0: 1−mv2/kT=0, so vmp=kT/m. (Option C is the 2D mean speed.)

    Why people get this wrong: Using the 3D factor v2: the power of v comes from the dimension of velocity space.

  12. MSQHard

    A dilute gas of hard-sphere molecules is held at a fixed temperature while its pressure is lowered (at first the mean free path stays far smaller than the container). Which statements are correct?
    1. Its thermal conductivity does not change while the mean free path remains small compared with the container.
    2. Its self-diffusion coefficient grows in inverse proportion to the pressure.
    3. Its viscosity falls in proportion to the pressure.
    4. Once the mean free path exceeds the gap between two plates at different temperatures, the heat carried between them falls in proportion to the pressure.
    Answer and solution

    Answer: A, B, D

    κ and η contain nλ, which is independent of n, so both are independent of pressure (Maxwell's surprising result). D=13v‾λ contains λ∝1/n alone, so D∝1/P. When λ exceeds the gap, molecules fly straight from plate to plate; each still carries a fixed energy, but their number is proportional to n, so the heat flow falls with pressure. This is how a vacuum flask and a Pirani gauge work.

    Why people get this wrong: Fewer molecules does not mean less viscosity: each one carries momentum proportionally farther.

  13. NATHard

    A 1.0 L vessel of helium (M=4.0 g/mol) is kept at 300 K and leaks into vacuum through a pinhole of area 1.0×10−8 m2. The time for its pressure to fall to half is ______ s (R=8.314 J mol−1 K−1).
    Answer and solution

    Answer: 220 (±2.5)

    Molecules escape at the effusion rate 14nv‾A, so dNdt=−v‾A4VN: exponential decay with time constant τ=4Vv‾A. Here v‾=8RT/πM=8×8.314×300/(π×0.004)=1260 m/s, so τ=4×10−31260×10−8=317 s. At fixed temperature P∝N, and the half-time is τln⁡2=220 s.

    Why people get this wrong: Using nv‾A (dropping the 14) makes the leak four times faster: 55 s.

  14. NATTop rank

    The fraction of molecules in a Maxwellian gas with speeds below the most probable speed is ______ (to two decimal places).
    Answer and solution

    Answer: 0.43 (±0.01)

    With x=v/vmp, fdv=4πx2e−x2dx. Integrate by parts: ∫014πx2e−x2dx=erf(1)−2πe−1=0.8427−0.4151≈0.43. Fewer than half are below the peak because the tail on the fast side is long.

    Why people get this wrong: Answering 0.5 by thinking of the peak as the median.

  15. NATTop rank

    A thermally insulated vessel holds an ideal monatomic gas, which slowly effuses through a pinhole into vacuum. When half of the atoms have escaped, the ratio of the final to the initial temperature of the gas left inside is ______ (to two decimal places).
    Answer and solution

    Answer: 0.79 (±0.01)

    Each escaping atom carries 2kT on average (the effusion bias), more than the 32kT average inside. Energy balance for U=32NkT: d(32NkT)=2kTdN, so 32NdT=12TdN, i.e. dT/T=13dN/N. Then T∝N1/3 and Tf/Ti=(1/2)1/3≈0.79.

    Why people get this wrong: Assuming the temperature stays constant because the escaping gas does no work: the fast atoms leave first, so the remaining gas cools.

  16. MCQTop rank

    A mixture of helium (M=4) and argon (M=40) is at temperature T. The mean relative speed of a He–Ar pair divided by the mean speed of a helium atom is closest to
    1. 1.41
    2. 3.32
    3. 1.00
    4. 1.05
    Answer and solution

    Answer: D

    The relative velocity of two Maxwellian molecules is itself Maxwellian with the reduced mass μ=m1m2/(m1+m2), so v‾rel=8kT/πμ. Ratio =mHe/μ=(mHe+mAr)/mAr=44/40≈1.05. Heavy argon atoms are almost at rest relative to fast helium.

    Why people get this wrong: 2 holds only for two molecules of the same mass.

  17. MSQTop rank

    An ideal gas column stands in uniform gravity g at a single temperature T everywhere (isothermal atmosphere). Which statements are correct?
    1. The number density falls with height as e−mgz/kT
    2. The speed distribution of molecules at height z is the same Maxwell distribution as at the ground
    3. Molecules high up have a smaller mean kinetic energy, because they had to climb
    4. Heavier molecules have a smaller scale height kT/mg
    Answer and solution

    Answer: A, B, D

    The Boltzmann factor e−(12mv2+mgz)/kT factorises into a speed part and a height part. So the speed distribution (and the mean energy 32kT) is the same at every height, while the density falls as e−mgz/kT with scale height kT/mg. Slow molecules do not get as high, which is why fewer arrive, not why those that arrive are slower.

    Why people get this wrong: C sounds natural but contradicts equilibrium at one temperature: temperature measures mean kinetic energy.

  18. MCQTop rank

    Molecules of a Maxwellian gas (mean speed v‾) strike a wall. Averaged over the molecules that hit the wall (each counted once per hit), their mean speed is
    1. v‾
    2. 3π/8v‾
    3. 4πv‾
    4. 3π8v‾
    Answer and solution

    Answer: D

    Fast molecules hit the wall more often: the flux of molecules with speed v is proportional to vf(v). So the mean speed of hitting molecules is ∫v2fdv∫vfdv=⟨v2⟩v‾=3kT/mv‾. With v‾2=8kT/πm, 3kT/m=3π8v‾2, so the answer is 3π8v‾≈1.18v‾. The same flux weighting is why effusing molecules carry 2kT of kinetic energy each, not 32kT.

    Why people get this wrong: 3π/8v‾ is just vrms; the flux weighting gives ⟨v2⟩/⟨v⟩, not ⟨v2⟩.

← All topics · Timed mock test →