Home / Courses / CSIR NET Physics / Practice / Magnetic materials: B, H and M

Magnetic materials: B, H and M

Electricity and magnetism · 6 questions and templates for CSIR NET Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. NATHard

    A sphere of linear magnetic material with μr=4 is placed in a uniform field B0=0.10 T. The field inside the sphere is ______ T (to two decimal places).
    Answer and solution

    Answer: 0.2 T (±0.005)

    Solving with M→=χmH→ (the magnetic twin of the dielectric sphere): B→in=3μrμr+2B→0=126(0.10)=0.20 T. Check: with H→in=B→0/μ0−M→/3 and M→=3H→in we get Hin=B0/(2μ0) and Bin=μ0μrHin=2B0.

    Why people get this wrong: Using μrB0=0.40 T, the long-needle answer. The sphere's demagnetising field reduces it.

  2. NATHard

    Spin-12 moments of one Bohr magneton sit in a field of 1.0 T at 300 K, each either along or against the field. The net fractional alignment (N↑−N↓)/N is ______ ×10−3 (to two decimal places).
    Answer and solution

    Answer: 2.24 $10^{-3}$ (±0.03)

    The two energies are ∓μBB, so by Boltzmann N↑−N↓N=tanh⁡μBBkBT. Here μBBkBT=9.27×10−244.14×10−21=2.24×10−3, and tanh⁡x≈x for small x. Only about 2 in 1000 moments are effectively aligned at room temperature.

    Why people get this wrong: Using the classical Langevin result x/3, which is for moments that can point in any direction.

  3. MSQTop rank

    For a uniformly magnetised sphere with no free current, which statements are correct?
    1. Inside, B→ is parallel to M→.
    2. Inside, H→ is antiparallel to M→.
    3. Outside, the field is exactly that of a point dipole.
    4. ∇⋅H→=0 everywhere, including on the surface.
    Answer and solution

    Answer: A, B, C

    B→in=23μ0M→ and H→in=−13M→. Outside it is an exact dipole of moment 43πR3M→. On the surface M→ drops to zero abruptly, so ∇⋅H→=−∇⋅M→ is a surface "magnetic charge" σm=M→⋅nˆ, not zero.

    Why people get this wrong: Using ∇⋅B→=0 for H→. H→ behaves like an electrostatic field of magnetic "poles".

  4. MCQTop rank

    In Weiss's mean-field model each moment feels an extra field λM→ from its neighbours, and the material otherwise follows Curie's law M=(C/T)Heff. Above the ordering temperature the susceptibility and the Curie temperature are
    1. χ=CT−λC, Tc=λC
    2. χ=CT+λC, Tc=λC
    3. χ=λCT−C, Tc=C
    4. χ=CT, Tc=λ/C
    Answer and solution

    Answer: A

    M=CT(H+λM) gives M(1−λCT)=CTH, so χ=MH=CT−λC. It diverges at Tc=λC, below which a spontaneous M appears. A plus sign in the denominator (T+θ) describes antiferromagnets above the Néel point.

    Why people get this wrong: The second option, with T+λC, is the antiferromagnetic form.

  5. NATTop rank

    A spherical shell of linear material with μr=1000, inner radius 9.0 cm and outer radius 10 cm, is placed in a uniform field B0. Using the exact solution BinB0=9μr(2μr+1)(μr+2)−2(ab)3(μr−1)2, the field inside the cavity is ______ B0 (four decimal places).
    Answer and solution

    Answer: 0.0164 (±0.0003)

    With (a/b)3=0.729: (2μr+1)(μr+2)=2001×1002=2.005×106 and 2×0.729×9992=1.455×106. The denominator is 5.50×105, so BinB0=90005.50×105=0.0164. For μr≫1 this is close to 92μr(1−a3/b3)=0.0166: a thin shell of high-permeability metal cuts the field about sixty-fold, because the field lines prefer to run through the metal around the cavity.

    Why people get this wrong: Expecting a magnetic shield to work like a conductor in electrostatics (zero field inside); it only reduces the field by a factor of order μrt/R.

← All topics · Timed mock test →