Home / Courses / CSIR NET Physics / Practice / Dia-, para-, ferro- and antiferromagnetism

Dia-, para-, ferro- and antiferromagnetism

Solid state physics and devices · 77 questions and templates for CSIR NET Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    The magnetic susceptibility of a typical diamagnetic solid such as copper or quartz is
    1. small, positive and proportional to 1/T
    2. large and positive below a critical temperature
    3. exactly −1
    4. small (about −10−5), negative and almost independent of temperature
    Answer and solution

    Answer: D

    Diamagnetism comes from the orbital response of filled shells (Lenz's law at the atomic scale). It is weak, χ∼−10−6 to −10−5 in SI, and does not depend on temperature because it does not involve thermal alignment of moments. χ=−1 is a superconductor.
  2. MCQWarm-up

    For a dilute paramagnet of non-interacting moments in a weak field, the susceptibility varies with temperature as
    1. χ∝T
    2. χ∝1/T
    3. χ∝e−Δ/kBT
    4. χ independent of T
    Answer and solution

    Answer: B

    Thermal agitation opposes alignment. For μB≪kBT the mean moment along B is μ2B/3kBT (classically) or g2μB2J(J+1)B/3kBT (quantum): the Curie law χ=C/T.
  3. NATWarm-up

    The Mn2+ ion has five unpaired 3d electrons (S=5/2, orbital moment quenched). Its spin-only effective moment 2S(S+1) is ______ μB (to two decimal places).
    Answer and solution

    Answer: 5.92 (±0.01)

    μeff=gS(S+1)μB with g=2: 22.5×3.5=28.75=5.92μB, close to measured values for Mn2+ salts. (Its maximum component along a field is gS=5μB.)
  4. MCQWarm-up

    Above its Curie temperature TC, the susceptibility of a ferromagnet in mean-field theory is
    1. χ=CT+TC
    2. χ=CT
    3. χ=CT−TC
    4. χ=C(T−TC)
    Answer and solution

    Answer: C

    The molecular field λM adds to the applied field: M=CT(H+λM), so χ=CT−λC with TC=λC. It diverges as T→TC+. The plus sign belongs to antiferromagnets.
  5. MSQWarm-up

    Which statements of Hund's rules for the ground state of an ion with one partly filled shell are correct?
    1. J=L+S always, because it maximises the moment.
    2. Choose the largest total spin S allowed by the Pauli principle.
    3. For that S, choose the largest total orbital angular momentum L.
    4. J=|L−S| if the shell is less than half full and J=L+S if more than half full.
    Answer and solution

    Answer: B, C, D

    Parallel spins keep electrons apart (exchange), lowering the Coulomb energy; then maximal L keeps them circulating the same way. Spin-orbit coupling λ𝐋⋅𝐒 has λ>0 for less than half filling (smallest J lowest) and λ<0 beyond (largest J lowest).
  6. MCQWarm-up

    As an antiferromagnet is cooled through its Néel temperature TN, its (powder) susceptibility
    1. has a cusp (a maximum) at TN
    2. diverges at TN
    3. drops to −1
    4. rises smoothly as 1/T through TN
    Answer and solution

    Answer: A

    Above TN, χ=C/(T+θ) rises on cooling. Below TN the sublattices lock antiparallel and resist rotation, so χ falls (strongly for fields along the spin axis). The result is a cusp at TN, not a divergence: there is no net spontaneous moment.
  7. MCQWarm-up

    Which of these metals is ferromagnetic at room temperature?
    1. Copper
    2. Aluminium
    3. Chromium
    4. Nickel
    Answer and solution

    Answer: D

    Nickel orders ferromagnetically below its Curie temperature of 627 K. Copper is diamagnetic, aluminium weakly (Pauli) paramagnetic, and chromium is an antiferromagnet (with no net moment). Iron and cobalt are the other room-temperature ferromagnetic elements.

    Why people get this wrong: Chromium has ordered moments, but they alternate (antiferromagnetic), so it is not attracted strongly to a magnet.

  8. NATStandard

    The Ce3+ ion (4f1) has ground term 2F5/2. Its Landé g factor is ______ (to three decimal places).
    Answer and solution

    Answer: 0.857 (±0.002)

    g=1+J(J+1)+S(S+1)−L(L+1)2J(J+1) with L=3, S=12, J=52: g=1+8.75+0.75−1217.5=1−2.517.5=0.857=6/7. Below 1 because the spin points against the larger orbital moment.
  9. MCQStandard

    The ground term of the Gd3+ ion (4f7) is
    1. 7F6
    2. 8S7/2
    3. 6H5/2
    4. 8F13/2
    Answer and solution

    Answer: B

    A half-filled f shell has all seven spins parallel: S=7/2, 2S+1=8. One electron in each ml from +3 to −3 gives L=0 (S term), so J=S=7/2: 8S7/2. With no orbital moment, Gd3+ has g=2 and a spin-only moment.
  10. NATStandard

    For Ce3+ (2F5/2, g=6/7), the effective moment gJ(J+1) that sets its Curie constant is ______ μB (to two decimal places).
    Answer and solution

    Answer: 2.54 (±0.01)

    J(J+1)=2.5×3.5=2.958; times 6/7 gives 2.54μB. For rare-earth ions the 4f shell is shielded from the crystal field, so J (not S) determines the moment.
  11. MCQStandard

    The spin (Pauli) paramagnetism of conduction electrons in a metal is
    1. proportional to 1/T, like a Curie law, but 102 times larger
    2. zero, because the spins pair up
    3. roughly independent of temperature and of order μ0μB2g(EF)
    4. negative, about −13 of the Curie value
    Answer and solution

    Answer: C

    Only electrons within about μBB of EF can flip, so instead of n moments responding with weight 1/kBT, g(EF)μBB electrons respond fully: χP=μ0μB2g(EF)=32nμ0μB2/EF, about T/TF times the Curie value and independent of T. The orbital (Landau) diamagnetism is −13χP for free electrons.
  12. MCQStandard

    A paramagnetic salt obeying the Curie law has χ=3.0×10−4 at 300 K. At 4.0 K (still in weak field) its susceptibility is
    1. 4.0×10−6
    2. 3.0×10−4
    3. 2.25×10−2
    4. 1.2×10−3
    Answer and solution

    Answer: C

    χ∝1/T: 3.0×10−4×300/4.0=2.25×10−2. Cooling paramagnetic salts this way is the basis of magnetic thermometry and adiabatic demagnetisation.
  13. MSQStandard

    Which statements about Langevin (core) diamagnetism are correct?
    1. It is strongly temperature dependent, like the Curie law.
    2. It arises because an applied field changes the orbital motion of electrons, inducing a moment opposed to the field.
    3. Every material has a diamagnetic contribution, though it may be masked by paramagnetism.
    4. It is proportional to the number of electrons per atom times their mean square orbital radius.
    Answer and solution

    Answer: B, C, D

    Switching on B adds a Larmor precession to each orbit, inducing a moment −e2B6m⟨r2⟩ per electron (Lenz). So χ=−μ0nZe2⟨r2⟩6m, set by atomic sizes, not by temperature. All matter has it.
  14. MCQStandard

    For a material above its ordering temperature, 1/χ is plotted against T and the straight line extrapolates to 1/χ=0 at T=−45 K. The material most likely orders
    1. ferromagnetically
    2. antiferromagnetically
    3. as a superconductor
    4. never; it is diamagnetic
    Answer and solution

    Answer: B

    χ=C/(T−θ) with θ=−45 K, i.e. C/(T+45). A negative Curie-Weiss temperature means the interactions favour antiparallel neighbours: antiferromagnetic (or ferrimagnetic) order at low T. A ferromagnet gives θ>0.
  15. NATStandard

    In the mean-field model of a ferromagnet of spin-12 moments (g=2), kBTC=μBBE, where BE is the molecular (exchange) field at T=0. For TC=1000 K, BE is about ______ T (to the nearest 10 T).
    Answer and solution

    Answer: 1490 (±15)

    With M=nμBtanh⁡(μBBeff/kBT) and Beff=λM, the non-zero solution appears at kBTC=μBλnμB=μBBE. So BE=kBTC/μB=1.381×10−23×1000/9.274×10−24=1490 T, far larger than any laboratory field: the "field" is really the exchange interaction.
  16. MCQStandard

    The measured moments of iron-group (3d) ions in salts fit 2S(S+1)μB much better than gJ(J+1)μB. The reason is that
    1. the crystal field acting on the outer 3d orbitals is stronger than spin-orbit coupling and quenches the orbital moment
    2. the 3d electrons have no orbital angular momentum in the free ion
    3. Hund's rules do not apply to 3d ions
    4. spin-orbit coupling in 3d ions is larger than the crystal field
    Answer and solution

    Answer: A

    The 3d shell is outermost, so neighbouring ions split it strongly; real crystal-field states are standing-wave combinations of ±ml with ⟨Lz⟩=0. With L quenched, J is not a good quantum number and only the spin contributes. The 4f shell of rare earths is buried, so there J survives.
  17. MCQStandard

    Magnetite (Fe3O4) has two magnetic sublattices with antiparallel moments of different size. Such a material is
    1. an antiferromagnet with zero net moment
    2. a paramagnet
    3. a ferrimagnet with a spontaneous net moment below its ordering temperature
    4. a diamagnet
    Answer and solution

    Answer: C

    Antiparallel sublattices with unequal moments leave a net spontaneous magnetisation, so a ferrimagnet behaves outwardly like a weak ferromagnet (domains, hysteresis), but its 1/χ above TC is curved, not a Curie-Weiss line. Ferrites are ferrimagnets and are insulators, so they suit high-frequency cores.
  18. MSQStandard

    For N non-interacting ions per unit volume with total angular momentum J and factor g, which statements about the weak-field susceptibility are correct?
    1. A plot of χT against T is flat.
    2. The effective moment is gJ(J+1)μB, larger than the saturation moment gJμB.
    3. In SI units χ has units of A/m.
    4. χ=μ0Ng2μB2J(J+1)3kBT.
    Answer and solution

    Answer: A, B, D

    Expanding the Brillouin function for small x=gμBJB/kBT gives M=Ng2μB2J(J+1)B/3kBT, so χ=μ0M/B as stated and χT=C is constant. J(J+1)>J, so μeff>gJμB. χ=M/H is dimensionless in SI.
  19. MCQStandard

    The Er3+ ion has ground term 4I15/2 (S=3/2, L=6, J=15/2), with Landé factor g=6/5. The largest moment one ion can show along a strong field at low temperature (its saturation moment) is
    1. 9.58μB
    2. 9.00μB
    3. 7.50μB
    4. 3.00μB
    Answer and solution

    Answer: B

    At saturation every ion sits in MJ=J, giving μz=gJμB=65×152=9.00μB. The Curie-law effective moment gJ(J+1)=1.2×63.75=9.58μB is larger, because it measures ⟨μ2⟩, including the components that never line up.

    Why people get this wrong: gJ(J+1) enters the susceptibility; the saturation magnetisation uses gJ.

  20. MSQStandard

    Which statements about magnetic susceptibilities (SI, dimensionless) are correct?
    1. Core (Langevin) diamagnetism gives χ<0, almost independent of temperature.
    2. Pauli paramagnetism of conduction electrons gives χ>0, almost independent of temperature.
    3. Non-interacting local moments give χ>0, varying as 1/T.
    4. A superconductor in the Meissner state has χ=+1.
    Answer and solution

    Answer: A, B, C

    Core diamagnetism comes from induced orbital currents, set by the size of the electron orbits, not by temperature. Pauli paramagnetism involves only electrons within about kBT of EF, a fraction that cancels the 1/T of each spin's alignment, leaving χ nearly constant. Free moments follow the Curie law C/T. A superconductor expels the field (B=0), so M=−H and χ=−1: a perfect diamagnet.

    Why people get this wrong: Perfect diamagnetism is χ=−1; a positive value would mean attraction.

  21. MCQStandard

    For the core of a mains transformer, which runs round its hysteresis loop 50 times a second, the best magnetic material has
    1. high coercivity and high remanence
    2. low coercivity and a narrow hysteresis loop
    3. a wide loop, to store as much energy as possible
    4. zero permeability
    Answer and solution

    Answer: B

    Each cycle round the loop turns energy equal to the loop area into heat. A soft magnetic material (low coercivity, narrow loop, high permeability), such as silicon steel, keeps these losses small and is easy to magnetise. High coercivity and remanence (a "hard" material) suit permanent magnets instead.

    Why people get this wrong: Permanent magnets and transformer cores need opposite properties.

  22. NATExam level

    Iron has 8.5×1028 atoms per m3 and a saturation moment of 2.2μB per atom. Its saturation magnetisation is ______ ×106 A/m (to two decimal places).
    Answer and solution

    Answer: 1.73 (±0.02)

    Ms=nμ=8.5×1028×2.2×9.274×10−24=1.73×106 A/m, so μ0Ms=2.2 T. The non-integer 2.2μB shows the moments come from itinerant d electrons, not localised ions.
  23. NATExam level

    A salt has 1.0×1028 magnetic ions per m3, each with μeff=5.92μB. Its Curie constant C=μ0nμeff2/3kB (with χ=C/T dimensionless, SI) is ______ K (to three decimal places).
    Answer and solution

    Answer: 0.915 (±0.005)

    μeff=5.92×9.274×10−24=5.49×10−23 J/T; squared 3.01×10−45. C=1.257×10−6×1028×3.01×10−453×1.381×10−23=0.915 K. So χ(300 K)=3.0×10−3.
  24. MCQExam level

    The magnetisation of ions with angular momentum J is M=NgμBJBJ(x) with x=gμBJB/kBT. For x≪1 the Brillouin function is approximately
    1. 1
    2. x3
    3. J+13Jx
    4. tanh⁡x
    Answer and solution

    Answer: C

    Expanding, BJ(x)≈J+13Jx, which gives the Curie law with J(J+1). For J=12 it is x (from tanh⁡x), and as J→∞ it tends to the classical Langevin result x/3. For x≫1, BJ→1 (saturation).
  25. MSQExam level

    For the Weiss mean-field theory of a ferromagnet, which statements are correct?
    1. Just below TC, M∝(TC−T)1/2.
    2. Above TC, χ=C/(T−TC).
    3. At T=0 the magnetisation equals the saturation value Ms.
    4. At low temperature it predicts Ms−M∝T3/2.
    Answer and solution

    Answer: A, B, C

    Expanding BJ near TC gives M2∝(TC−T): exponent β=12. The Curie-Weiss law follows from the molecular field. Mean-field theory gives an exponentially small deviation Ms−M∝e−2TC/T at low T (for J=12); the observed T3/2 (Bloch law) needs spin waves.
  26. NATExam level

    For a free-electron metal with n=2.65×1028 m−3 and EF=3.24 eV, the Pauli susceptibility χP=3nμ0μB2/2EF is ______ ×10−6 (to two decimal places).
    Answer and solution

    Answer: 8.28 (±0.08)

    χP=3×2.65×1028×1.257×10−6×(9.274×10−24)22×3.24×1.602×10−19=8.59×10−241.038×10−18=8.28×10−6. Adding Landau diamagnetism (−13 of this) leaves 5.5×10−6, before core diamagnetism.
  27. MCQExam level

    At small wave vector k, spin-wave (magnon) energies vary as
    1. k2 in a ferromagnet and k in an antiferromagnet
    2. k in a ferromagnet and k2 in an antiferromagnet
    3. k2 in both
    4. k in both
    Answer and solution

    Answer: A

    For a Heisenberg ferromagnet ℏω=2JS(z−∑δcos⁡𝐤⋅𝜹)≈2JSa2k2 (simple cubic). For an antiferromagnet the two sublattices couple the equations and ℏω∝|sin⁡ka|≈ka, linear like phonons. Hence the ferromagnetic T3/2 Bloch law and antiferromagnetic T3 magnon heat capacity.
  28. NATExam level

    A ferromagnet follows the Bloch law Ms(0)−Ms(T)∝T3/2. Its magnetisation is 1.0% below saturation at 100 K. At 400 K (still well below TC) it is ______ % below saturation.
    Answer and solution

    Answer: 8 (±0.05)

    The number of thermally excited magnons in 3D with ω∝k2 is ∝T3/2, and each lowers M by gμB. Quadrupling T multiplies the deficit by 43/2=8: 8%.
  29. MSQExam level

    Which statements about the hysteresis loop of a ferromagnet are correct?
    1. The coercive field is the field at which the magnetisation first reaches saturation.
    2. The area of the B-H loop is the energy lost as heat per unit volume per cycle.
    3. Permanent magnets need a large coercivity.
    4. Transformer cores need a narrow loop (low coercivity).
    Answer and solution

    Answer: B, C, D

    Work per unit volume is ∮HdB, the loop area, dissipated in irreversible domain-wall jumps. Hard magnets resist demagnetisation (large Hc); soft magnets waste little energy each cycle (small Hc). The coercive field is where M (or B) returns to zero on the reverse sweep.
  30. NATExam level

    A solid has 5.0×1028 atoms per m3, each with Z=10 electrons of mean square distance from the nucleus ⟨r2⟩=0.010 nm2. Its Langevin susceptibility χ=−μ0nZe2⟨r2⟩/6me is ______ ×10−5 (to two decimal places, with sign).
    Answer and solution

    Answer: -2.95 (±0.03)

    χ=−1.257×10−6×5.0×1028×10×(1.602×10−19)2×1.0×10−206×9.109×10−31=−1.61×10−345.47×10−30=−2.95×10−5. Note ⟨r2⟩=⟨x2+y2+z2⟩; the 1/6 already includes the average of x2+y2=23r2.

    Why people get this wrong: Forgetting to convert nm2 to m2 (10−18).

← All topics · Timed mock test →