Home / Courses / CSIR NET Physics / Practice / Maxwell's equations and electromagnetic waves

Maxwell's equations and electromagnetic waves

Electricity and magnetism · 6 questions and templates for CSIR NET Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. NATTop rank

    The ionosphere has a free-electron density of 1.0×1012 m−3. Waves below its plasma frequency are reflected. That plasma frequency fp=ωp/2π is ______ MHz (to two decimal places).
    Answer and solution

    Answer: 8.98 MHz (±0.05)

    ωp=ne2ϵ0me=(1012)(1.602×10−19)2(8.854×10−12)(9.109×10−31)=5.64×107 rad/s, so fp=8.98 MHz. The dispersion relation ω2=ωp2+c2k2 gives imaginary k below ωp: shortwave radio bounces, FM (100 MHz) passes through to space.

    Why people get this wrong: Giving ωp in rad/s (56.4 M) as if it were the frequency in hertz.

  2. MSQTop rank

    Which statements follow from Maxwell's equations?
    1. In vacuum all electromagnetic waves travel at the same speed, whatever their frequency.
    2. The speed of light in vacuum depends on how fast the source moves.
    3. In a uniform linear dielectric with no free charge, ∇⋅E→=0.
    4. In a good conductor, the electric and magnetic fields of a plane wave are in phase.
    Answer and solution

    Answer: A, C

    The vacuum wave equation has speed 1/μ0ϵ0 with no frequency in it: no dispersion. That speed contains no reference to the source, the clash with Galilean relativity that led to Einstein's postulate (the equations alone do not say "for every observer", but they give no source-speed dependence). With D→=ϵE→, ϵ uniform and ρf=0, ∇⋅E→=0. In a good conductor B→ lags E→ by 45∘.

    Why people get this wrong: Dispersion in glass comes from the frequency dependence of ϵ, not from the vacuum equations.

  3. MCQTop rank

    A parallel-plate capacitor with circular plates is being charged slowly. Where does the energy that builds up between the plates enter the gap?
    1. Along the connecting wires, then across the gap from plate to plate
    2. Through the edge of the gap (the open cylindrical side), flowing radially inward
    3. It is created inside the gap by the displacement current
    4. Through the back faces of the plates
    Answer and solution

    Answer: B

    Between the plates E→ is axial and growing, and the displacement current makes a circling B→. S→=E→×B→/μ0 points radially inward. At the edge (r=R), S⋅2πRd=Eμ0⋅μ0ϵ0R2E˙⋅2πRd=ddt(12ϵ0E2⋅πR2d): exactly the rate at which the stored energy grows.

    Why people get this wrong: Picturing energy flowing inside the wires like water. It flows through the space around them.

  4. NATTop rank

    In copper (σ=5.8×107 S/m, μ≈μ0) a 1.0 MHz wave travels inside the metal with phase speed ______ m/s (to the nearest whole number).
    Answer and solution

    Answer: 415 m/s (±3)

    In a good conductor k=(1+i)/δ with δ=2ωμσ, so the real part of k is 1/δ and the phase speed is v=ωRek=ωδ. Here ω=6.28×106 s⁻¹ and δ=26.28×106×1.257×10−6×5.8×107=66.1 μm. So v=6.28×106×6.61×10−5=415 m/s, only a little faster than sound in air, and the wavelength inside is only 2πδ=0.42 mm.

    Why people get this wrong: Assuming the wave still moves at c (or c/n) inside the metal.

  5. MSQTop rank

    Which statements about the structure of Maxwell's equations are true?
    1. Without the displacement term, the divergence of Ampère's law would force ∇⋅J→=0, which fails for a charging capacitor
    2. If ∇⋅B→=0 holds at one instant, Faraday's law keeps it true at all later times
    3. In empty space the equations are unchanged by E→→cB→, B→→−E→/c
    4. The displacement current is a flow of charge across the gap of a charging capacitor
    Answer and solution

    Answer: A, B, C

    The divergence of a curl is zero, so ∇⋅(∇×B→)=μ0∇⋅J→ would require ∇⋅J→=0; adding μ0ε0∂tE→ makes it consistent with the continuity equation. Taking the divergence of Faraday's law gives ∂t(∇⋅B→)=0. In vacuum, substituting the duality map turns Faraday's law into the Ampère-Maxwell law and back, and swaps the two Gauss laws. The displacement current is a changing electric field, not moving charge.

    Why people get this wrong: Picturing the displacement current as charge leaking across the gap.

← All topics · Timed mock test →