Home / Courses / CSIR NET Physics / Practice / Phase transitions and critical phenomena

Phase transitions and critical phenomena

Statistical physics · 83 questions and templates for CSIR NET Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    In Ehrenfest’s classification, a first-order phase transition is one in which
    1. the Gibbs energy itself jumps
    2. first derivatives of the Gibbs energy, such as S and V, jump
    3. only the second derivatives, such as CP, jump
    4. nothing measurable changes
    Answer and solution

    Answer: B

    G is continuous across any transition (the phases coexist with equal G). In a first-order transition S=−∂G/∂T and V=∂G/∂P jump, giving a latent heat L=TΔS and a volume change: melting, boiling.
  2. MCQWarm-up

    Which feature marks a continuous (second-order) phase transition?
    1. A large latent heat
    2. Coexistence of two phases with different densities
    3. No latent heat, with the order parameter growing continuously from zero below Tc
    4. A jump in the volume
    Answer and solution

    Answer: C

    In a continuous transition S and V are continuous (no latent heat), while response functions such as C or χ jump or diverge. The order parameter rises smoothly from zero.
  3. MCQWarm-up

    The natural order parameter for the ferromagnet-paramagnet transition is
    1. the spontaneous magnetisation
    2. the susceptibility
    3. the temperature
    4. the heat capacity
    Answer and solution

    Answer: A

    An order parameter is zero in the disordered (symmetric) phase and non-zero in the ordered phase: the spontaneous magnetisation M at zero field. For liquid-gas it is ρl−ρg; for a superconductor the gap or pair amplitude.
  4. MCQWarm-up

    By the Gibbs phase rule, how many intensive variables can be changed independently at the triple point of a pure substance?
    1. 2
    2. 1
    3. 3
    4. 0
    Answer and solution

    Answer: D

    F=C−P+2=1−3+2=0. The triple point has a fixed T and P, which is why the triple point of water defined the kelvin for decades.
  5. MCQWarm-up

    The Clausius-Clapeyron equation gives the slope of a coexistence curve as
    1. dP/dT=LΔv/T
    2. dP/dT=TΔv/L
    3. dP/dT=Δv/L
    4. dP/dT=L/(TΔv)
    Answer and solution

    Answer: D

    Equal chemical potentials along the curve: −s1dT+v1dP=−s2dT+v2dP, so dP/dT=Δs/Δv=L/(TΔv), with L and Δv per unit mass (or per mole) for the same change.
  6. MSQWarm-up

    Which of these are continuous (second-order) transitions?
    1. Iron losing its ferromagnetism at the Curie point in zero field
    2. Water passing through its liquid-gas critical point
    3. A metal becoming superconducting in zero magnetic field
    4. Ice melting at 273 K and 1 atm
    Answer and solution

    Answer: A, B, C

    The first three have no latent heat and a growing order parameter or diverging response. Melting has a latent heat of 334 kJ/kg: first order.
  7. MCQWarm-up

    Water and steam coexist at 100∘C and 1 atm. Which molar quantity has the same value in both phases?
    1. The molar Gibbs energy
    2. The molar entropy
    3. The molar volume
    4. The molar enthalpy
    Answer and solution

    Answer: A

    Two phases coexist in equilibrium only if moving a molecule from one to the other does not change G: their chemical potentials (molar Gibbs energies) are equal. Entropy, volume and enthalpy all jump; the jumps in S and H give the latent heat L=TΔS=ΔH, and the jump in V appears in the Clausius-Clapeyron equation.

    Why people get this wrong: At a first-order transition the first derivatives of G jump while G itself is continuous.

  8. MCQStandard

    In Landau theory F(m)=F0+a(T−Tc)m2+bm4 with a,b>0. Below Tc the equilibrium order parameter is
    1. m=a(Tc−T)/b
    2. m=a(Tc−T)/2b
    3. m=a(Tc−T)/2b
    4. m=0
    Answer and solution

    Answer: B

    ∂F/∂m=2a(T−Tc)m+4bm3=0 gives m2=a(Tc−T)/2b. The m=0 solution is a maximum below Tc.
  9. MCQStandard

    In mean-field (Landau) theory the order parameter vanishes as m∝(Tc−T)β with
    1. β=1
    2. β=1/8
    3. β=1/2
    4. β=1/3
    Answer and solution

    Answer: C

    m2∝Tc−T, so β=1/2. The exact 2D Ising value is 1/8 and the 3D value is about 0.33: fluctuations, ignored by mean field, change the exponents.
  10. NATStandard

    In Landau theory, m(0.96Tc)/m(0.99Tc) is ______.
    Answer and solution

    Answer: 2 (±0.001)

    m∝(Tc−T)1/2: 0.04/0.01=2.
  11. MCQStandard

    Above the Curie temperature, the susceptibility of a ferromagnet in mean-field theory follows
    1. χ=C/T
    2. χ=C/(T+Tc)
    3. χ=C(T−Tc)
    4. χ=C/(T−Tc)
    Answer and solution

    Answer: D

    The Weiss molecular field λM adds to the applied field: M=(C/T)(H+λM), giving χ=C/(T−λC) with Tc=λC. So γ=1 in mean field. (C/(T+θ) describes antiferromagnets above TN.)
  12. NATStandard

    For the Ising model H=−J∑⟨ij⟩sisj (s=±1) on a square lattice with J=1.0 meV, mean-field theory predicts kTc=zJ. The predicted Tc is ______ K.
    Answer and solution

    Answer: 46.4 K (±0.5)

    Each spin feels the mean field of z=4 neighbours, zJm; self-consistency m=tanh⁡(zJm/kT) has a non-zero solution below kTc=zJ=4 meV, i.e. Tc=4×10−3/8.617×10−5=46.4 K. (Onsager’s exact answer is 43% lower.)
  13. MCQStandard

    The one-dimensional Ising model with nearest-neighbour coupling and no field
    1. orders below kTc=2J
    2. has no phase transition at any T>0
    3. orders below kTc=J
    4. has a first-order transition
    Answer and solution

    Answer: B

    A single domain wall costs only 2J but can sit at any of N places, gaining entropy kln⁡N; at any T>0 walls appear and destroy long-range order. The exact solution confirms Tc=0. Mean field wrongly predicts kTc=2J.
  14. NATStandard

    Ice melts at 273.15 K with L=3.34×105 J/kg. The specific volumes are 1.091×10−3 m3/kg (ice) and 1.000×10−3 m3/kg (water). The slope dP/dT of the melting curve is ______ MPa/K.
    Answer and solution

    Answer: -13.4 MPa/K (±0.15)

    dP/dT=L/(TΔv)=3.34×105/(273.15×(−9.1×10−5))=−1.34×107 Pa/K. Negative because ice is less dense than water: pressure lowers the melting point, by about 0.0075 K per atmosphere.
  15. MCQStandard

    In an Ehrenfest second-order transition, which quantities are discontinuous?
    1. S and V
    2. CP, the thermal expansivity α and the compressibility κT
    3. The Gibbs energy
    4. The latent heat and the volume
    Answer and solution

    Answer: B

    Second derivatives of G jump: CP=−T∂2G/∂T2, Vα=∂2G/∂T∂P, −VκT=∂2G/∂P2. G, S and V are continuous.
  16. MCQStandard

    At T=Tc the magnetisation responds to a small field as M∝h1/δ. In mean-field theory δ is
    1. 1
    2. 2
    3. 15
    4. 3
    Answer and solution

    Answer: D

    At Tc the quadratic term vanishes: ∂F/∂m=4bm3−h=0, so m∝h1/3 and δ=3. (2D Ising: δ=15.)
  17. MCQStandard

    Near Tc, with t=(T−Tc)/Tc, the standard critical exponents are defined by
    1. C∝|t|−α, m∝(−t)β, χ∝|t|−γ, ξ∝|t|−ν
    2. C∝|t|α, m∝t−β, χ∝|t|γ, ξ∝|t|ν
    3. C∝e−α/t, m∝e−β/t, χ∝eγ/t, ξ∝eν/t
    4. C∝tα only above Tc
    Answer and solution

    Answer: A

    Positive exponents describe the divergence of C, χ and ξ and the vanishing of m. Mean field: α=0 (a jump), β=1/2, γ=1, ν=1/2, δ=3.
  18. NATStandard

    At the critical temperature of a mean-field magnet, the field is increased 8 times. The magnetisation increases by a factor of ______.
    Answer and solution

    Answer: 2 (±0.001)

    M∝h1/δ=h1/3: 81/3=2.
  19. MSQStandard

    Which statements about spontaneous symmetry breaking at a ferromagnetic transition are correct?
    1. The Hamiltonian is symmetric under reversing all spins, but the low-temperature state is not
    2. Below Tc the system picks one of the equivalent ordered states
    3. In zero field the average magnetisation of a finite system, over infinite time, is zero
    4. The symmetry is broken by the Hamiltonian itself
    Answer and solution

    Answer: A, B, C

    The ordered state has lower symmetry than H. In the thermodynamic limit the time to flip between +m and −m becomes infinite, so the system stays in one; a finite system eventually samples both and averages to zero. The Hamiltonian stays symmetric.
  20. MSQStandard

    Which statements about coexistence curves on a P-T phase diagram are correct?
    1. The melting curve of water has a negative slope
    2. The boiling curve of every substance has a positive slope
    3. Along a coexistence curve the two phases have equal chemical potential
    4. The slope of a coexistence curve is zero at the triple point
    Answer and solution

    Answer: A, B, C

    Clapeyron: slope =Δs/Δv. Water expands on freezing, so its melting slope is negative. Vaporisation always has Δs>0 and Δv>0, so a positive slope. Coexistence means μ1=μ2. At the triple point three curves meet with finite, different slopes.
  21. NATStandard

    1.0 kg of water is held in a rigid 0.50 m3 vessel at 100∘C, where liquid and vapour coexist (specific volumes 0.001043 and 1.672 m3/kg). The fraction of the mass that is vapour is ______ (three decimal places).
    Answer and solution

    Answer: 0.299 (±0.002)

    With vapour fraction x, the specific volume is v=(1−x)vl+xvg, so x=v−vlvg−vl=0.5−0.0010431.672−0.001043=0.299 (the lever rule). Although only 30% of the mass is vapour, it fills almost all of the volume.

    Why people get this wrong: The vapour fills over 99.9% of the volume; the question asks for its share of the mass.

  22. MCQStandard

    Pure water can be cooled several degrees below 0∘C without freezing, but a ferromagnet cooled through its Curie point in zero field cannot stay non-magnetic. The reason is that
    1. water has a much larger heat capacity than iron
    2. the Curie point depends on pressure, the freezing point does not
    3. magnetic forces act faster than the forces between water molecules
    4. a first-order transition has a free-energy barrier (a new phase must nucleate), while at a continuous transition the old state becomes unstable at once
    Answer and solution

    Answer: D

    At a first-order transition the two phases are separate minima of the free energy; below the melting point the liquid is still a local minimum, and forming ice requires a nucleus whose surface energy creates a barrier. So the liquid can persist (supercooling). At a continuous transition the single minimum at m=0 splits: below Tc the old state is a maximum, so fluctuations destroy it immediately. Hysteresis and metastability are marks of first-order transitions.

    Why people get this wrong: Supercooling is not about how fast heat is removed; it needs a barrier, which only first-order transitions have.

  23. NATExam level

    A system has Landau free energy density f=f0+a(T−Tc)m2+bm4 with a=1.0×103 J m−3K−1, b=1.0×105 J m−3 and Tc=100 K. The jump in heat capacity per unit volume at Tc is ______ J K−1m−3.
    Answer and solution

    Answer: 500 J K⁻¹ m⁻³ (±3)

    Below Tc, m2=a(Tc−T)/2b and f−f0=−a2(Tc−T)2/4b. c=−T∂2f/∂T2=Ta2/2b below, 0 above (beyond f0). Jump =a2Tc/2b=106×100/(2×105)=500 J K−1m−3; the ordered side is higher.
  24. MCQExam level

    In mean-field theory of the Ising model (z neighbours, coupling J, zero field) the magnetisation per spin satisfies
    1. m=tanh⁡(zJm/kT)
    2. m=coth⁡(zJm/kT)−kT/zJm
    3. m=zJ/kT
    4. m=e−zJ/kT
    Answer and solution

    Answer: A

    Replace the neighbours by their average m: each spin sees an effective field zJm, so m=⟨s⟩=tanh⁡(βzJm). Graphically, a non-zero crossing exists only when the slope βzJ at the origin exceeds 1: kTc=zJ. (The Langevin form belongs to classical vector spins.)
  25. NATExam level

    Solve the mean-field equation m=tanh⁡(mTc/T) at T=0.5Tc. The spontaneous magnetisation m is ______.
    Answer and solution

    Answer: 0.957 (±0.002)

    Iterate m→tanh⁡(2m) from m=1: 0.964,0.958,0.9575,… converging to m≈0.957. Already 96% saturated at half of Tc.
  26. MCQExam level

    The Rushbrooke scaling relation is α+2β+γ=2. Which set of exponents satisfies it?
    1. α=0, β=1/2, γ=2
    2. α=0, β=1/8, γ=1
    3. α=1/2, β=1/2, γ=1
    4. α=0, β=1/2, γ=1 (mean field)
    Answer and solution

    Answer: D

    Mean field: 0+1+1=2. 2D Ising (0,1/8,7/4) also works: 0+1/4+7/4=2. The others give 3, 1.25 and 2.5.
  27. NATExam level

    For the 2D Ising model β=1/8 and γ=7/4. Using the Widom relation γ=β(δ−1), δ is ______.
    Answer and solution

    Answer: 15

    δ=1+γ/β=1+14=15.
  28. NATExam level

    For the 3D Ising universality class β=0.326 and γ=1.237. From the Rushbrooke relation, α is ______.
    Answer and solution

    Answer: 0.111 (±0.002)

    α=2−2β−γ=2−0.652−1.237=0.111: a weak divergence of the heat capacity, seen in fluids near their critical point.
  29. MCQExam level

    Onsager’s exact result for the square-lattice Ising model is kTc/J=2/ln⁡(1+2)≈2.27. Compared with mean-field theory, this is
    1. higher, because mean field overestimates fluctuations
    2. lower, because mean field ignores the fluctuations that oppose ordering
    3. the same
    4. lower, because mean field counts too few neighbours
    Answer and solution

    Answer: B

    Mean field gives kTc/J=z=4. Real fluctuations (local disorder) make ordering harder, so the true Tc is lower: 2.27/4=0.57 of the mean-field value.
  30. MSQExam level

    A Landau expansion F=a(T−T0)m2−cm3+bm4 (b,c>0) contains a cubic term. Which statements are correct?
    1. The transition becomes first order
    2. It occurs above T0
    3. The order parameter jumps at the transition
    4. A cubic term is allowed only if m and −m are physically equivalent
    Answer and solution

    Answer: A, B, C

    The cubic term makes a second minimum at m>0 that reaches the height of F(0) while a(T−T0) is still positive, so m jumps from 0 at some T∗>T0: first order. A cubic term is forbidden when m→−m is a symmetry (as for a ferromagnet); it appears for, e.g., the nematic liquid crystal or the 3-state Potts model.

← All topics · Timed mock test →