Home / Courses / Engineering entrance / Practice / Differential equations

Differential equations

Class 12 · 280 questions and templates for Engineering entrance, in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Differential equations.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    The order of d3ydx3+5(dydx)4+y=0 is
    1. 4
    2. 1
    3. 3
    4. 5
    Answer and solution

    Answer: C

    Order is the highest derivative that appears. Here it is d3ydx3, so the order is 3. The power 4 sits on a lower derivative, so it does not matter for order.

    Why people get this wrong: Do not confuse a power with the order of the derivative.

  2. NATWarm-up

    Find the degree of (d2ydx2)3+dydx=x.
    Answer and solution

    Answer: 3

    The equation is already a polynomial in the derivatives. The highest-order derivative d2ydx2 is raised to power 3, so the degree is 3.

    Why people get this wrong: Degree is the power of the highest-order derivative only.

  3. NATWarm-up

    How many arbitrary constants are in the general solution of a differential equation of order 4?
    Answer and solution

    Answer: 4

    The general solution of an nth order equation has exactly n independent arbitrary constants. Here n=4.

    Why people get this wrong: The count equals the order, not the degree.

  4. MCQWarm-up

    The degree of y′′+(y′)3+y4=0 is
    1. 1
    2. 2
    3. 3
    4. 4
    Answer and solution

    Answer: A

    The highest-order derivative is y′′ (order 2) and it appears to power 1. So the degree is 1. The powers 3 and 4 belong to y′ and y.

    Why people get this wrong: Look only at the power of y′′.

  5. MCQWarm-up

    The differential equation of all straight lines through the origin, y=mx, is
    1. dydx=x
    2. ydydx=x
    3. xdydx=y
    4. d2ydx2=0
    Answer and solution

    Answer: C

    Differentiate: y′=m. Put m=y/x back: xy′=y. One constant gives a first order equation.

    Why people get this wrong: The d2y/dx2=0 equation is for all straight lines, with two constants.

  6. MCQWarm-up

    Which is a solution of dydx=3y?
    1. y=5ex/3
    2. y=3e5x
    3. y=5x3
    4. y=5e3x
    Answer and solution

    Answer: D

    y=5e3x gives y′=15e3x=3y. For y=5ex/3 the slope is y/3, for y=3e5x it is 5y, for y=5x3 it is 15x2: none equals 3y.

    Why people get this wrong: Check by differentiating, not by guessing from the form.

  7. MCQWarm-up

    The general solution of dydx=yx (x,y>0) is
    1. y=cx
    2. y=x+c
    3. y=c/x
    4. y=x2+c
    Answer and solution

    Answer: A

    Separate: dyy=dxx. Integrate: ln⁡y=ln⁡x+ln⁡c, so y=cx.

    Why people get this wrong: Write the constant as ln⁡c to combine the logs.

  8. MCQWarm-up

    The solution of dydx=x2y is
    1. y=x33+c
    2. ln⁡|y|=x22+c
    3. ln⁡|y|=x33+c
    4. y=x3y3+c
    Answer and solution

    Answer: C

    dyy=x2dx. Integrating: ln⁡|y|=x33+c.

    Why people get this wrong: Divide by y first; do not integrate x2y with respect to x.

  9. MCQWarm-up

    Which of these differential equations is homogeneous?
    1. dydx=x+y2x
    2. dydx=x2+y2xy
    3. dydx=x+y+1x−y
    4. dydx=x+y2
    Answer and solution

    Answer: B

    A first order equation is homogeneous if dydx=F(yx), i.e. f(tx,ty)=f(x,y). For x2+y2xy, replacing (x,y) by (tx,ty) leaves it unchanged. In the others the terms have different degrees, or a constant 1 spoils it.

    Why people get this wrong: A lone constant makes the degrees unequal.

  10. MCQWarm-up

    The integrating factor of dydx+2xy=x2 is
    1. 2x
    2. x2
    3. e2x
    4. ln⁡x2
    Answer and solution

    Answer: B

    IF =e∫Pdx=e∫(2/x)dx=e2ln⁡x=x2.

    Why people get this wrong: IF is e∫P, not ∫P.

  11. MCQWarm-up

    The integrating factor of dydx+ytan⁡x=sec⁡x is
    1. cos⁡x
    2. etan⁡x
    3. tan⁡x
    4. sec⁡x
    Answer and solution

    Answer: D

    ∫tan⁡xdx=ln⁡sec⁡x, so the IF is eln⁡sec⁡x=sec⁡x.

    Why people get this wrong: ∫tan⁡xdx=ln⁡|sec⁡x|, a log, so e of it is sec⁡x.

  12. NATWarm-up

    A population grows at a rate proportional to its size and doubles in 5 years. In how many years will it become three times its size? Give the answer in years (2 decimal places)
    Answer and solution

    Answer: 7.9248 (±0.01)

    N=N0ekt. Doubling: e5k=2, k=ln⁡25. Tripling: ekt=3, t=ln⁡3k=5ln⁡3ln⁡2≈7.92 years.

    Why people get this wrong: Tripling takes less than 10 years, not 5×3.

  13. MCQWarm-up

    The order of d2ydx2+x2y=0 is
    1. 1
    2. 0
    3. 2
    4. 3
    Answer and solution

    Answer: C

    The highest derivative present is the second derivative, so the order is 2.

    Why people get this wrong: x2 is not a derivative.

  14. NATWarm-up

    Find the degree of (dydx)4+y=x.
    Answer and solution

    Answer: 4

    The only derivative is dydx and it is raised to power 4. Degree 4.

    Why people get this wrong: The equation is already polynomial in y′.

  15. MCQWarm-up

    The general solution of dydx=3x2 is
    1. y=3x3+c
    2. y=6x+c
    3. y=x33+c
    4. y=x3+c
    Answer and solution

    Answer: D

    dy=3x2dx, integrate: y=x3+c.

    Why people get this wrong: Integrate once; the derivative is not the answer.

  16. NATWarm-up

    Find the order of the differential equation of the family of all straight lines y=mx+c (m,c both arbitrary).
    Answer and solution

    Answer: 2

    Two constants m and c need two differentiations: y′′=0. The order is 2.

    Why people get this wrong: One constant fewer when the line passes through the origin.

  17. MCQWarm-up

    The integrating factor of dydx+y=x is
    1. e−x
    2. ex
    3. x
    4. 1
    Answer and solution

    Answer: B

    P=1, so IF =e∫1dx=ex.

    Why people get this wrong: The IF uses +P, so ex and not e−x.

  18. MCQWarm-up

    The solution of dydx=y with y(0)=2 is
    1. y=e2x
    2. y=x+2
    3. y=2ex
    4. y=2e−x
    Answer and solution

    Answer: C

    dyy=dx, y=Cex, y(0)=2 gives C=2.

    Why people get this wrong: C is the value at x=0.

  19. NATWarm-up

    If dydx=4x3 and y(0)=1, find y(1).
    Answer and solution

    Answer: 2

    y=x4+c, y(0)=1 gives c=1. y(1)=1+1=2.

    Why people get this wrong: Use the initial value to find c.

  20. MCQWarm-up

    Newton's law of cooling for a body at temperature T in surroundings at Ts is
    1. dTdt=−k(T−Ts)
    2. dTdt=−kT
    3. dTdt=k(T−Ts)
    4. dTdt=−k(T−Ts)2
    Answer and solution

    Answer: A

    The rate of cooling is proportional to the temperature difference, and the temperature falls, so the sign is negative: dTdt=−k(T−Ts) with k>0.

    Why people get this wrong: The difference from the surroundings matters, not T itself.

  21. NATWarm-up

    A radioactive sample of 80 g has half-life 5 days. How many grams are left after 15 days?
    Answer and solution

    Answer: 10

    15 days is 3 half-lives: 80×(12)3=10 g.

    Why people get this wrong: Three halvings, not a third.

  22. MCQWarm-up

    The solution of dydx=ex is
    1. y=ex+c
    2. y=xex+c
    3. y=ex/x+c
    4. y=cex⋅x
    Answer and solution

    Answer: A

    Integrate both sides: y=∫exdx=ex+c.

    Why people get this wrong: The integral of ex is ex.

  23. MCQWarm-up

    Which function satisfies dydx−3y=0?
    1. y=e−3x
    2. y=3x
    3. y=e3x
    4. y=x3
    Answer and solution

    Answer: C

    y=e3x gives y′=3e3x=3y. For e−3x, y′=−3y.

    Why people get this wrong: Check the sign of the exponent.

  24. MCQWarm-up

    Eliminating C from y=Ce−x gives
    1. y′−y=0
    2. y′+y=0
    3. y′=xy
    4. y′′+y=0
    Answer and solution

    Answer: B

    y′=−Ce−x=−y, so y′+y=0.

    Why people get this wrong: Differentiate once.

  25. MCQStandard

    For sin⁡(d2ydx2)+dydx=0, the degree is (NCERT meaning)
    1. 0
    2. 1
    3. 2
    4. not defined
    Answer and solution

    Answer: D

    Degree is defined only when the equation is a polynomial in its derivatives. The highest derivative y′′ sits inside sin⁡, so the equation cannot be made a polynomial in y′′. Degree is not defined (order is 2).

    Why people get this wrong: A derivative inside sin, cos, log or an exponential kills the degree.

  26. NATStandard

    Find (order) + (degree) of y=xdydx+1+(dydx)2.
    Answer and solution

    Answer: 3

    Isolate the root: y−xy′=1+y′2. Square both sides: (y−xy′)2=1+y′2. Now it is a polynomial in y′ of power 2. Order 1, degree 2, sum 3.

    Why people get this wrong: Remove the radical before you read off the degree.

  27. MCQStandard

    The order and degree of (d3ydx3)3=1+(d2ydx2)2 are
    1. 3 and 2
    2. 3 and 3
    3. 2 and 2
    4. 2 and 3
    Answer and solution

    Answer: B

    The highest derivative is y′′′, so order 3. It is raised to power 3, so degree 3. The (y′′)2 term is a lower derivative.

    Why people get this wrong: The degree comes from the highest derivative, not the largest exponent.

  28. NATStandard

    Find the order of the differential equation obtained by eliminating constants from y=ae2x+be−x+c.
    Answer and solution

    Answer: 3

    e2x, e−x and 1 are independent, so a,b,c are three genuine constants. Three constants give a third order equation.

    Why people get this wrong: Check that the constants really are independent.

  29. MCQStandard

    The differential equation of y=Ae2x+Be−x is
    1. y′′+y′−2y=0
    2. y′′−y′+2y=0
    3. y′′−2y′+y=0
    4. y′′−y′−2y=0
    Answer and solution

    Answer: D

    The exponents 2 and −1 are roots of (m−2)(m+1)=m2−m−2=0. So the equation is y′′−y′−2y=0. Check: y′′=4Ae2x+Be−x, y′=2Ae2x−Be−x; y′′−y′−2y=(4−2−2)Ae2x+(1+1−2)Be−x=0.

    Why people get this wrong: Roots 2 and −1 give m2−m−2, not m2+m−2.

  30. MCQStandard

    The differential equation of y=asin⁡x+bcos⁡x is
    1. y′′−y=0
    2. y′′+y=0
    3. y′+y=0
    4. y′′+y′=0
    Answer and solution

    Answer: B

    y′=acos⁡x−bsin⁡x, y′′=−asin⁡x−bcos⁡x=−y. So y′′+y=0.

    Why people get this wrong: Differentiating sine twice gives minus sine.

← All topics