Home / Courses / Engineering entrance / Practice / Practical chemistry: salt analysis, titrations and tests

Practical chemistry: salt analysis, titrations and tests

Class 12 · 315 questions and templates for Engineering entrance, in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Practical chemistry: salt analysis, titrations and tests.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    In a titration the solution of known concentration is called the
    1. standard solution
    2. indicator
    3. end point
    4. titre
    Answer and solution

    Answer: A

    The standard solution has a known strength; its volume at the end point is used to find the unknown.

  2. MCQWarm-up

    The point at which the indicator changes colour in a titration is the
    1. origin
    2. end point
    3. standard
    4. meniscus
    Answer and solution

    Answer: B

    At the end point the reaction is complete, or very nearly so.

  3. MCQWarm-up

    Which of these is used as the indicator for the titration of KMnO4 against oxalic acid?
    1. phenolphthalein
    2. methyl orange
    3. none, since KMnO4 is a self indicator
    4. starch
    Answer and solution

    Answer: C

    The first drop of excess KMnO4 gives a permanent pale pink colour.

  4. MCQWarm-up

    In the titration of oxalic acid with NaOH, the best indicator is
    1. methyl orange
    2. starch
    3. litmus paper only
    4. phenolphthalein
    Answer and solution

    Answer: D

    A weak acid with a strong base reaches the end point in the basic range, around pH 8 to 9, where phenolphthalein changes.

  5. MCQWarm-up

    The ratio of the distance moved by a substance to that moved by the solvent front is the
    1. Rf value
    2. pH
    3. Q value
    4. Ka
    Answer and solution

    Answer: A

    Rf is always between 0 and 1 and has no units.

  6. MCQWarm-up

    Mohr's salt is
    1. FeSO4·7H2O
    2. FeSO4·(NH4)2SO4·6H2O
    3. K2SO4·Al2(SO4)3·24H2O
    4. (NH4)2SO4
    Answer and solution

    Answer: B

    It is a double salt of ferrous sulphate and ammonium sulphate, which is more stable to air than ferrous sulphate alone.

  7. MCQWarm-up

    Potash alum has the formula
    1. FeSO4·(NH4)2SO4·6H2O
    2. Al2(SO4)3
    3. K2SO4·Al2(SO4)3·24H2O
    4. K2Cr2O7
    Answer and solution

    Answer: C

    It is also written KAl(SO4)2·12H2O.

  8. MCQWarm-up

    In the Lassaigne test, an organic compound is fused with
    1. copper oxide
    2. calcium oxide
    3. lead acetate
    4. sodium metal
    Answer and solution

    Answer: D

    Sodium converts the covalently bonded N, S and halogens into ionic NaCN, Na2S and NaX, which dissolve in water.

  9. MCQWarm-up

    The Prussian blue colour in the Lassaigne test shows the presence of
    1. nitrogen
    2. sulphur
    3. chlorine
    4. phosphorus
    Answer and solution

    Answer: A

    NaCN with FeSO4 gives Na4[Fe(CN)6], which gives Prussian blue with Fe3+.

  10. MCQWarm-up

    A white curdy precipitate soluble in ammonia, with AgNO3 in the acidified extract, shows
    1. bromine
    2. chlorine
    3. iodine
    4. sulphur
    Answer and solution

    Answer: B

    AgCl is white and dissolves in dilute NH3. AgBr is pale yellow and AgI is yellow, and both are much less soluble.

  11. MCQWarm-up

    Carbon in an organic compound is detected by heating it with CuO and passing the gas through
    1. FeSO4 solution
    2. lead acetate
    3. lime water, which turns milky
    4. silver nitrate
    Answer and solution

    Answer: C

    C + 2CuO → CO2 + 2Cu. CO2 turns lime water milky.

  12. MCQWarm-up

    Hydrogen in an organic compound is detected by turning anhydrous CuSO4
    1. white
    2. green
    3. black
    4. blue
    Answer and solution

    Answer: D

    Water vapour formed on heating with CuO turns white CuSO4 to blue CuSO4·5H2O.

  13. MCQWarm-up

    Brisk effervescence with a carbonate and dilute HCl is due to
    1. CO2
    2. SO2
    3. H2S
    4. NO2
    Answer and solution

    Answer: A

    CO32− + 2H+ → H2O + CO2. The gas turns lime water milky.

  14. MCQWarm-up

    The gas with a smell of rotten eggs formed from a sulphide with dilute acid is
    1. SO2
    2. H2S
    3. NH3
    4. Cl2
    Answer and solution

    Answer: B

    S2− + 2H+ → H2S. It blackens lead acetate paper.

  15. MCQWarm-up

    Ammonia is detected by
    1. a blue ring
    2. a pink flame
    3. white fumes with a glass rod dipped in conc. HCl
    4. a milky lime water
    Answer and solution

    Answer: C

    NH3 + HCl → NH4Cl, white fumes. Also Nessler's reagent gives a brown colour.

  16. MCQWarm-up

    The flame colour of a sodium salt is
    1. brick red
    2. crimson
    3. green
    4. golden yellow
    Answer and solution

    Answer: D

    Sodium gives a persistent golden yellow flame.

  17. MCQWarm-up

    Neutral ferric chloride gives a violet colour with
    1. phenol
    2. ethanol
    3. acetic acid
    4. acetone
    Answer and solution

    Answer: A

    Phenols form coloured iron(III) complexes. Ethanol and acetone do not.

  18. MCQWarm-up

    Tollens' reagent is
    1. alkaline copper sulphate
    2. ammoniacal silver nitrate
    3. acidified KMnO4
    4. NaOH and iodine
    Answer and solution

    Answer: B

    It gives a silver mirror with aldehydes. Fehling's solution is the alkaline copper(II) reagent.

  19. MCQStandard

    In the Lassaigne test for nitrogen, FeSO4 is added, then the mixture is boiled, cooled and acidified with conc. H2SO4. The coloured product is
    1. Fe(SCN)3, blood red
    2. Na2[Fe(CN)5NO], violet
    3. Fe4[Fe(CN)6]3, Prussian blue
    4. PbS, black
    Answer and solution

    Answer: C

    Fe2+ + 6CN− → [Fe(CN)6]4−. Some Fe2+ oxidises to Fe3+ in air. [Fe(CN)6]4− + Fe3+ → Prussian blue.

  20. MCQStandard

    Sulphur in a Lassaigne extract is confirmed by
    1. silver nitrate giving a white precipitate
    2. ferrous sulphate giving a blue colour
    3. ammonium molybdate giving yellow
    4. sodium nitroprusside giving violet, or lead acetate giving a black precipitate
    Answer and solution

    Answer: D

    Na2S + Na2[Fe(CN)5NO] → Na4[Fe(CN)5NOS], violet. Na2S + (CH3COO)2Pb → PbS, black.

  21. MCQStandard

    A compound has both N and S. The Lassaigne extract with FeCl3 gives
    1. a blood-red colour, from Fe(SCN)2+
    2. a Prussian blue colour only
    3. no colour
    4. a black precipitate
    Answer and solution

    Answer: A

    NaSCN forms, as C, N and S from the organic compound combine with sodium. SCN− + Fe3+ gives blood red.

  22. MCQStandard

    Before adding AgNO3 to test for halogens, the Lassaigne extract is boiled with dilute HNO3 to
    1. oxidise the halide ions
    2. destroy NaCN and Na2S, which would also give precipitates with silver nitrate
    3. precipitate the sodium
    4. reduce the nitrate
    Answer and solution

    Answer: B

    AgCN (white) and Ag2S (black) would hide the halide test. HNO3 removes CN− as HCN and S2− as H2S.

  23. MCQStandard

    A pale yellow precipitate which is sparingly soluble in ammonia with AgNO3 indicates
    1. chlorine
    2. iodine
    3. bromine
    4. nitrogen
    Answer and solution

    Answer: C

    AgBr is pale yellow and dissolves only slightly in conc. NH3.

  24. MCQStandard

    The sodium fusion extract is made by
    1. dissolving the cold melt in dilute acid
    2. adding it to lime water
    3. heating with CuO
    4. plunging the red-hot tube into distilled water and boiling
    Answer and solution

    Answer: D

    The hot tube breaks and the fused mass dissolves. It is boiled and filtered. The filtrate is alkaline.

  25. MCQStandard

    Phosphorus in an organic compound is detected by fusion with
    1. sodium peroxide, and then boiling with HNO3 and ammonium molybdate, giving a yellow precipitate
    2. sodium, and adding lead acetate
    3. CuO, and passing through lime water
    4. zinc dust
    Answer and solution

    Answer: A

    Phosphorus is oxidised to phosphate, which gives yellow ammonium phosphomolybdate.

  26. MCQStandard

    Baeyer's reagent is
    1. hot concentrated KMnO4
    2. cold, dilute, alkaline KMnO4
    3. acidified K2Cr2O7
    4. ammoniacal AgNO3
    Answer and solution

    Answer: B

    Its purple colour is decolourised by a C=C or C≡C, and a brown precipitate of MnO2 forms.

  27. MCQStandard

    Which test is used to detect unsaturation?
    1. Silver mirror test
    2. Lucas test
    3. Decolourisation of bromine water
    4. Carbylamine test
    Answer and solution

    Answer: C

    An alkene adds Br2 and the red-brown colour disappears.

  28. MCQStandard

    The Lucas reagent is
    1. FeCl3 in water
    2. ZnCl2 in NaOH
    3. CuSO4 in NaOH
    4. anhydrous ZnCl2 in conc. HCl
    Answer and solution

    Answer: D

    It distinguishes the classes of alcohols by the speed at which turbidity (an insoluble alkyl chloride) appears.

  29. MCQStandard

    With Lucas reagent at room temperature, turbidity appears immediately with
    1. a tertiary alcohol
    2. a primary alcohol
    3. methanol
    4. a phenol
    Answer and solution

    Answer: A

    The 3° alcohol forms the most stable carbocation, and so reacts fastest. A 2° alcohol takes about five minutes. A 1° alcohol shows no turbidity at room temperature.

  30. MCQStandard

    Aldehydes give a silver mirror with
    1. Lucas reagent
    2. Tollens' reagent
    3. neutral FeCl3
    4. Baeyer's reagent only
    Answer and solution

    Answer: B

    RCHO + 2[Ag(NH3)2]+ + 3OH− → RCOO− + 2Ag + 4NH3 + 2H2O. Ketones do not react.

← All topics