Home / Courses / Engineering entrance / Practice / Work, energy and power

Work, energy and power

Class 11 · 230 questions and templates for Engineering entrance, in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Work, energy and power.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    The SI unit of work is the
    1. watt (W)
    2. newton (N)
    3. joule (J)
    4. pascal (Pa)
    Answer and solution

    Answer: C

    Work = force × displacement, so its unit is newton metre = joule. The watt is the unit of power, the newton of force and the pascal of pressure.
  2. NATWarm-up

    A force of 10 N pulls a box through 5 m. The force makes an angle of 60∘ with the displacement. Find the work done by the force (in J).
    Answer and solution

    Answer: 25 J

    W=Fdcos⁡θ=10×5×cos⁡60∘=10×5×0.5=25 J.
  3. MCQWarm-up

    Assertion (A): The work done by the centripetal force on a body in uniform circular motion is zero.
    Reason (R): The centripetal force is always perpendicular to the velocity of the body.
    1. Both A and R are true and R is the correct explanation of A
    2. Both A and R are true but R is not the correct explanation of A
    3. A is true but R is false
    4. A is false but R is true
    Answer and solution

    Answer: A

    Work done in a small step =F→⋅ds→. The centripetal force points to the centre and the displacement is along the tangent, so the angle is 90∘ and cos⁡90∘=0. Both true, and R explains A.
  4. NATWarm-up

    Find the kinetic energy of a 4 kg ball moving at 3 ms−1 (in J).
    Answer and solution

    Answer: 18 J

    K=12mv2=12×4×9=18 J.
  5. MCQWarm-up

    One kilowatt-hour is equal to
    1. 3.6×103 J
    2. 3.6×106 J
    3. 1×103 J
    4. 746 J
    Answer and solution

    Answer: B

    1 kW =1000 J/s and 1 h =3600 s, so 1 kWh =1000×3600=3.6×106 J. It is a unit of energy, not of power.
  6. NATWarm-up

    A pump lifts 50 kg of water through 12 m in 10 s. Find its useful power (in W). Take g=10 ms−2.
    Answer and solution

    Answer: 600 W

    Work =mgh=50×10×12=6000 J. Power = work / time =6000/10=600 W.
  7. MCQWarm-up

    A spring stretched by x stores energy U. If the same spring is stretched by 2x it stores
    1. 4U
    2. 2U
    3. 8U
    4. U
    Answer and solution

    Answer: A

    U=12kx2 depends on the square of the stretch. Doubling x gives 12k(2x)2=4U.
  8. NATWarm-up

    A 2 kg block is lifted 5 m above the floor. Find its gravitational potential energy relative to the floor (in J, g=10).
    Answer and solution

    Answer: 100 J

    U=mgh=2×10×5=100 J.
  9. MCQWarm-up

    Which of these is a non-conservative force?
    1. Gravitational force
    2. Force of an ideal spring
    3. Electrostatic force between two fixed charges
    4. Kinetic friction
    Answer and solution

    Answer: D

    The work done by friction depends on the path (a longer path means more work lost). Gravity, an ideal spring and the electrostatic force do work that depends only on the end points.
  10. MCQWarm-up

    The work-energy theorem says that
    1. the work done by gravity always equals the change in kinetic energy
    2. the net work done on a body equals its change in momentum
    3. the net work done on a body equals the change in its kinetic energy
    4. the net work done equals force multiplied by time
    Answer and solution

    Answer: C

    Wnet=Kf−Ki. It uses the work of all forces together. Change of momentum is the impulse Ft, a different quantity.
  11. NATWarm-up

    A 2 kW motor runs for 30 s. How much energy does it deliver (in kJ)?
    Answer and solution

    Answer: 60 kJ

    Energy = power × time =2000×30=60000 J =60 kJ.
  12. MCQWarm-up

    A ball rolls along a level floor. The work done by gravity on it is
    1. positive
    2. zero
    3. negative
    4. mgh
    Answer and solution

    Answer: B

    Gravity is vertical and the displacement is horizontal, so the angle between them is 90∘ and the work is 0.
  13. MCQWarm-up

    Statement I: The work done by gravity in moving a body between two points depends only on the end points.
    Statement II: Gravity is a conservative force.
    1. Both Statement I and Statement II are true
    2. Both Statement I and Statement II are false
    3. Statement I is true but Statement II is false
    4. Statement I is false but Statement II is true
    Answer and solution

    Answer: A

    Both true and II is the reason for I. Path-independence is the property of conservative forces.
  14. NATStandard

    A 5 kg block is pushed 4 m up a smooth incline of angle 30∘ at slow constant speed. Find the work done against gravity (in J, g=10).
    Answer and solution

    Answer: 100 J

    The block rises 4sin⁡30∘=2 m. Work against gravity =mgh=5×10×2=100 J.
  15. NATStandard

    A stone of mass 0.5 kg has kinetic energy 25 J. Find its speed (in ms−1).
    Answer and solution

    Answer: 10 m/s

    v=2K/m=50/0.5=100=10 ms−1.
  16. NATStandard

    A 2 kg body moving at 4 ms−1 is pushed by a force of 3 N along its motion for 3 m on a smooth floor. Find its final speed (in ms−1).
    Answer and solution

    Answer: 5 m/s

    Work =3×3=9 J. Ki=12×2×16=16 J, so Kf=25 J. Then v=2×25/2=5 ms−1.
  17. NATStandard

    A force F=3x2 newton acts on a body along x (in metres). Find the work done as the body moves from x=0 to x=2 m (in J).
    Answer and solution

    Answer: 8 J

    W=∫023x2dx=[x3]02=8 J.
  18. NATStandard

    A force acts along a straight line. It rises uniformly from 0 to 10 N between x=0 and x=4 m, stays at 10 N from 4 m to 10 m, and then falls uniformly to 0 at x=12 m. Find the work done (in J).
    Answer and solution

    Answer: 90 J

    Work is the area under the F-x graph. Triangle: 12×4×10=20. Rectangle: 6×10=60. Triangle: 12×2×10=10. Total =90 J.
  19. NATStandard

    A spring of constant 400 Nm−1 is compressed by 10 cm. Find the energy stored (in J).
    Answer and solution

    Answer: 2 J

    U=12kx2=12×400×(0.1)2=2 J. Convert cm to m before squaring.

    Why people get this wrong: Using 10 instead of 0.1 gives 20000 J.

  20. NATStandard

    A spring of constant 500 Nm−1 is stretched from 2 cm to 4 cm. Find the work done by the stretching force (in J).
    Answer and solution

    Answer: 0.3 J (±0.005)

    W=12k(x22−x12)=12×500×(0.0016−0.0004)=250×0.0012=0.3 J.

    Why people get this wrong: It is not 12k(x2−x1)2.

  21. MCQStandard

    A ball is dropped from a height of 20 m. Ignoring air, its speed on reaching the ground is (g=10)
    1. 20 ms−1
    2. 10 ms−1
    3. 14 ms−1
    4. 40 ms−1
    Answer and solution

    Answer: A

    mgh=12mv2, so v=2gh=2×10×20=20 ms−1.
  22. NATStandard

    A block slides from rest down a smooth incline and falls through a vertical height of 1.8 m. Find its speed at the bottom (in ms−1, g=10).
    Answer and solution

    Answer: 6 m/s

    Only gravity does work: v=2gh=36=6 ms−1. The angle of the incline does not matter.
  23. NATStandard

    A car moves at a steady 25 ms−1 while its engine delivers 20 kW to the wheels. Find the driving force (in N).
    Answer and solution

    Answer: 800 N

    P=Fv, so F=20000/25=800 N.
  24. NATStandard

    A pump lifts 1200 kg of water through 15 m in one minute. Its motor is 75% efficient. Find the electrical power the motor draws (in W, g=10).
    Answer and solution

    Answer: 4000 W

    Useful work =1200×10×15=180000 J. Useful power =180000/60=3000 W. Input power =3000/0.75=4000 W.
  25. NATStandard

    A 3 kg block slides 5 m on a rough floor (μ=0.2). Find the magnitude of the work done by friction (in J, g=10).
    Answer and solution

    Answer: 30 J

    Friction =μmg=0.2×3×10=6 N. Work =6×5=30 J (negative, since friction opposes the motion).
  26. MCQStandard

    Two bodies have equal kinetic energy and their masses are in the ratio 1:4. The ratio of their momenta is
    1. 1:4
    2. 4:1
    3. 2:1
    4. 1:2
    Answer and solution

    Answer: D

    p=2mK. With equal K, p∝m, so p1:p2=1:4=1:2.
  27. NATStandard

    A car of mass 1000 kg moving at 20 ms−1 brakes with all wheels locked on a road with μ=0.5. Find the stopping distance (in m, g=10).
    Answer and solution

    Answer: 40 m

    Work-energy: μmgd=12mv2, so d=v2/(2μg)=400/10=40 m. The mass cancels.
  28. NATStandard

    A pendulum bob on a 0.8 m string is released from the horizontal position. Find its speed at the lowest point (in ms−1, g=10).
    Answer and solution

    Answer: 4 m/s

    The bob falls through L=0.8 m. v=2gL=16=4 ms−1. The tension does no work.
  29. MCQStandard

    A force is called conservative if
    1. it has a constant magnitude
    2. it acts along a straight line
    3. the work done by it around any closed path is zero
    4. it never changes the kinetic energy of the body
    Answer and solution

    Answer: C

    The definition: zero work in a closed loop, which is the same as path-independent work. A conservative force (like gravity) can change kinetic energy.
  30. NATStandard

    A 3 kg book is moved from a table to a shelf that is 1.5 m higher. Find the increase in its gravitational potential energy (in J, g=10).
    Answer and solution

    Answer: 45 J

    ΔU=mgΔh=3×10×1.5=45 J. The path taken does not matter.

← All topics