Home / Courses / GATE Physics / Practice / Boundary value problems and Laplace's equation

Boundary value problems and Laplace's equation

Electricity and magnetism · 84 questions and templates for GATE Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Boundary value problems and Laplace's equation.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    Which of these functions satisfies the three-dimensional Laplace equation ∇2V=0 everywhere?
    1. x2+y2−2z2
    2. x2+y2+z2
    3. x2−y2+z2
    4. xyz2
    Answer and solution

    Answer: A

    Add the second derivatives. x2+y2−2z2: 2+2−4=0. x2+y2+z2: 6. x2−y2+z2: 2−2+2=2. xyz2: 0+0+2xy=2xy, not zero in general. Only the first is harmonic.

    Why people get this wrong: A function with mixed signs is not automatically harmonic: the coefficients of the squares must add to zero.

  2. MCQWarm-up

    In a separated solution V=X(x)Y(y) of the two-dimensional Laplace equation, Y(y) is chosen to oscillate as sin⁡ky. Then X(x) must be
    1. also oscillatory, sin⁡kx or cos⁡kx
    2. a linear function of x
    3. a combination of ekx and e−kx
    4. a constant
    Answer and solution

    Answer: C

    Substituting gives X′′/X+Y′′/Y=0. If Y′′/Y=−k2, then X′′/X=+k2, so X=Aekx+Be−kx (or cosh⁡ and sinh⁡). One direction oscillates, the other grows or decays.

    Why people get this wrong: The two separation constants have opposite signs; both cannot be negative.

  3. MCQWarm-up

    For a problem with azimuthal symmetry (no ϕ dependence), the general solution of Laplace's equation in spherical coordinates is
    1. ∑l(Alrl+Blr−l)Pl(cos⁡θ)
    2. ∑l(Alrl+Blr−(l+1))Pl(cos⁡θ)
    3. ∑l(Alrl+1+Blr−l)Pl(cos⁡θ)
    4. ∑lAle−lrPl(cos⁡θ)
    Answer and solution

    Answer: B

    With V=R(r)Θ(θ) the radial equation is ddr(r2dRdr)=l(l+1)R. Trying R=rn gives n(n+1)=l(l+1), so n=l or n=−(l+1). The angular part is the Legendre polynomial Pl(cos⁡θ).

    Why people get this wrong: The decaying power is r−(l+1), not r−l: for l=0 it gives the Coulomb 1/r.

  4. NATWarm-up

    The value of the Legendre polynomial P2(cos⁡θ) at θ=60∘ is ______ (to three decimal places).
    Answer and solution

    Answer: -0.125 (±0.001)

    P2(x)=12(3x2−1). With x=cos⁡60∘=0.5: 12(0.75−1)=−0.125.
  5. NATWarm-up

    In a charge-free region the potential is V=3x2+αy2−5z2 (volts, with lengths in metres). The constant α is ______ V/m2.
    Answer and solution

    Answer: 2

    Charge-free means ∇2V=0: 6+2α−10=0, so α=2.
  6. MCQWarm-up

    Specifying the normal derivative ∂V/∂n on the whole boundary of a region is called a
    1. Dirichlet condition
    2. Cauchy condition
    3. periodic condition
    4. Neumann condition
    Answer and solution

    Answer: D

    Dirichlet: V given on the boundary. Neumann: ∂V/∂n (the normal field) given. Cauchy: both given, which over-determines Laplace's equation. A Neumann problem fixes V up to an additive constant.
  7. NATStandard

    A square region 0≤x≤a, 0≤y≤a has V=0 on three sides and V=V0sin⁡(πx/a) on the side y=a, with V0=100 V and no charge inside. The potential at the centre of the square is ______ V (to one decimal place).
    Answer and solution

    Answer: 19.9 (±0.15)

    A single Fourier mode on the boundary gives a single mode inside: V=V0sin⁡πxasinh⁡(πy/a)sinh⁡π. It is harmonic (−k2+k2=0), vanishes at x=0, x=a, y=0, and matches the top. At the centre: 100×1×sinh⁡(π/2)sinh⁡π=100×2.30111.549=19.9 V.

    Why people get this wrong: Using sinh⁡ ratios at y=a/2 as if the decay were linear gives 50 V; the potential sags much faster.

  8. MCQStandard

    On the edge y=b of a rectangle 0≤x≤a the potential is a constant V0; the other three edges are grounded. In V=∑ncnsin⁡(nπx/a)sinh⁡(nπy/a)/sinh⁡(nπb/a), the coefficient c3 is
    1. 2V0/3π
    2. 4V0/3π
    3. 4V0/π
    4. 0
    Answer and solution

    Answer: B

    cn=2a∫0aV0sin⁡nπxadx=2V0nπ(1−cos⁡nπ), which is 4V0/nπ for odd n and 0 for even n. So c3=4V0/3π.

    Why people get this wrong: Forgetting the factor (1−cos⁡nπ)=2 for odd n gives 2V0/3π.

  9. NATStandard

    The potential on a sphere of radius R is held at V(R,θ)=V0P2(cos⁡θ) with V0=40 V, and there is no charge outside. The potential on the axis (θ=0) at r=2R is ______ V.
    Answer and solution

    Answer: 5 (±0.01)

    Outside, only the decaying solution matching P2 survives: V=V0(R/r)3P2(cos⁡θ). On the axis P2(1)=1, so V=40/8=5 V.

    Why people get this wrong: The exterior power for l=2 is r−3, not r−2 (which would give 10 V).

  10. MCQStandard

    A hollow sphere of radius R has its surface held at V0cos2⁡θ, with no charge inside. The potential at its centre is
    1. 0
    2. V0/2
    3. 2V0/3
    4. V0/3
    Answer and solution

    Answer: D

    Write cos2⁡θ=13+23P2(cos⁡θ). Inside, V=V03+2V03(rR)2P2(cos⁡θ), which is V0/3 at r=0. The mean value theorem says the same: the average of cos2⁡θ over a sphere is 1/3.

    Why people get this wrong: 1/2 is the average of cos2⁡ over an angle, not over the solid angle of a sphere.

  11. NATStandard

    A long neutral conducting cylinder lies with its axis perpendicular to a uniform field of 1.0 kV/m. The largest surface charge density induced on it is ______ nC/m2 (to one decimal place). Use ϵ0=8.854×10−12 F/m.
    Answer and solution

    Answer: 17.7 (±0.1)

    Outside, V=−E0(s−R2s)cos⁡ϕ, which is zero on s=R and uniform far away. Then σ=−ϵ0∂V/∂s|R=2ϵ0E0cos⁡ϕ, largest 2ϵ0E0=2×8.854×10−12×1000=1.77×10−8 C/m2 =17.7 nC/m2.

    Why people get this wrong: A sphere gives 3ϵ0E0; a cylinder in a transverse field gives 2ϵ0E0.

  12. MCQStandard

    For two-dimensional problems in polar coordinates (s,ϕ), the solutions of Laplace's equation with no ϕ dependence are
    1. a constant and ln⁡s
    2. s and 1/s
    3. s2 and s−2
    4. the Bessel functions J0(s) and Y0(s)
    Answer and solution

    Answer: A

    With no ϕ dependence, 1sdds(sdVds)=0, so sdV/ds is constant and V=a+bln⁡s. This is the potential of a line charge. The s±n solutions go with cos⁡nϕ, sin⁡nϕ for n≥1.

    Why people get this wrong: Bessel functions appear only when there is z dependence like e±kz.

  13. MSQStandard

    Which of these are solutions of Laplace's equation (away from the origin) in spherical coordinates?
    1. rcos⁡θ
    2. cos⁡θ/r2
    3. r2cos⁡θ
    4. r2(3cos2⁡θ−1)
    Answer and solution

    Answer: A, B, D

    Allowed products are rlPl and r−(l+1)Pl. rcos⁡θ=rP1 (it is just z). cos⁡θ/r2=r−2P1 (a dipole). r2(3cos2⁡θ−1)=2r2P2, i.e. 2z2−x2−y2. But r2cos⁡θ pairs the power of l=2 with P1: its Laplacian is 4cos⁡θ≠0.

    Why people get this wrong: The power of r and the order of the Legendre polynomial must match.

  14. MCQStandard

    A spherical shell of radius R carries surface charge σ=σ0cos⁡θ. The electric field inside it is
    1. zero
    2. −σ02ϵ0zˆ
    3. −σ03ϵ0zˆ
    4. +σ03ϵ0zˆ
    Answer and solution

    Answer: C

    Try Vin=Arcos⁡θ, Vout=AR3cos⁡θ/r2 (continuous at R). The jump in −∂V/∂r is σ/ϵ0: 2A+A=σ0/ϵ0, so A=σ0/3ϵ0. Inside V=σ0z/3ϵ0, so E→=−σ03ϵ0zˆ: uniform, pointing from the positive (top) cap towards the negative one.

    Why people get this wrong: The field inside points from + to −, i.e. along −zˆ when the top half is positive.

  15. NATStandard

    A hollow metal cube has five faces grounded and the sixth face (insulated from them) held at 120 V. The potential at the centre of the cube is ______ V.
    Answer and solution

    Answer: 20

    Superpose six versions of the problem, each with a different face at 120 V. Their sum has every face at 120 V, so the potential inside is 120 V everywhere. By symmetry each version contributes equally at the centre: 120/6=20 V.

    Why people get this wrong: Trying to solve the series is slow; the symmetry argument is exact.

  16. NATStandard

    The potential in a charge-free region is V=V0sin⁡(kx)e−ky with V0=10 V and k=π m−1. The magnitude of the electric field at y=1 m is ______ V/m (to two decimal places), and it is the same for every x.
    Answer and solution

    Answer: 1.36 (±0.01)

    Ex=−kV0cos⁡(kx)e−ky, Ey=+kV0sin⁡(kx)e−ky, so |E|=kV0e−ky, independent of x. At y=1: π×10×e−π=31.42×0.0432=1.36 V/m.
  17. NATStandard

    A long pipe of square cross-section has its four walls insulated from each other and held at 10 V, 20 V, 30 V and 60 V. The potential on the axis of the pipe (the centre of the square, far from the ends) is ______ V.
    Answer and solution

    Answer: 30 V (±0.01)

    Solve four problems, each with one wall at its potential and the other three at zero, and add them (Laplace's equation is linear and the boundary values add). By symmetry, a single wall at Vi gives the centre the same share as any other wall would, and all four walls at Vi would give exactly Vi; so each contributes Vi/4. The centre is at 10+20+30+604=30 V.

    Why people get this wrong: Averaging only opposite walls, or trying to sum a Fourier series when symmetry gives the answer directly.

  18. MCQStandard

    Laplace's equation in three Cartesian dimensions is separated as V=X(x)Y(y)Z(z) with X′′/X=−α2 and Y′′/Y=−β2 (α,β real and non-zero). Then Z(z) is
    1. sinusoidal, sin⁡(α2+β2z) and cos⁡
    2. exponential (or hyperbolic), e±α2+β2z
    3. linear in z
    4. a constant
    Answer and solution

    Answer: B

    The three ratios must add to zero: X′′X+Y′′Y+Z′′Z=0, so Z′′Z=α2+β2>0. Then Z=Aeγz+Be−γz (or sinh⁡, cosh⁡) with γ=α2+β2. Oscillation in two directions forces growth or decay in the third.

    Why people get this wrong: Expecting all three factors to oscillate; their separation constants must sum to zero.

  19. NATStandard

    In a charge-free region V=2x+3y2−3z2+5 (volts, metres). The average of V over the surface of the sphere of radius 1 m centred at the origin is ______ V.
    Answer and solution

    Answer: 5 V (±0.01)

    First check that V is harmonic: ∇2V=0+6−6=0. A harmonic function's average over any sphere equals its value at the centre: V(0,0,0)=5 V. (Directly: x averages to zero by symmetry, and y2 and z2 have equal averages, so they cancel.)

    Why people get this wrong: Averaging y2 and z2 to zero; they are positive, but cancel each other.

  20. NATExam level

    Two grounded plates lie at y=0 and y=a, and the end x=0 is held at V=V0sin⁡(πy/a); the strip extends to x→∞. The potential at mid-height falls to 1% of V0 at x=βa. The value of β is ______ (to two decimal places).
    Answer and solution

    Answer: 1.47 (±0.01)

    A single mode at the end gives V=V0e−πx/asin⁡(πy/a). At y=a/2, V/V0=e−πx/a=0.01, so x=(a/π)ln⁡100=1.466a.

    Why people get this wrong: The decay length is a/π, not a: the field dies within about one plate spacing.

  21. NATExam level

    A long rectangular pipe has walls y=0 and y=a grounded and walls x=±a held at V0=100 V. Using V=∑nodd4V0nπcosh⁡(nπx/a)cosh⁡(nπ)sin⁡nπya, the potential on the axis (x=0, y=a/2) is ______ V (to one decimal place).
    Answer and solution

    Answer: 11 (±0.1)

    Even in x (both side walls at V0), so cosh⁡. At the centre: n=1 gives 400π1cosh⁡π=127.3/11.59=10.98; n=3 gives −4003πcosh⁡3π≈−0.007. Total ≈11.0 V. The pipe is twice as wide as it is tall, so the far-away walls barely reach the middle.

    Why people get this wrong: Using sinh⁡ (which suits one wall at V0) instead of cosh⁡ for two symmetric walls.

  22. MCQExam level

    An isolated conducting sphere of radius R is held at potential Vs (relative to infinity) while placed in a uniform field E0zˆ. Its surface charge density is positive everywhere only if
    1. Vs>E0R
    2. Vs>2E0R
    3. Vs>3E0R
    4. Vs>0
    Answer and solution

    Answer: C

    Outside V=−E0(r−R3r2)cos⁡θ+VsRr: constant Vs on r=R, uniform field far away. Then σ=−ϵ0∂V/∂r|R=ϵ0(VsR+3E0cos⁡θ). Its minimum (at θ=π) is ϵ0(Vs/R−3E0), positive only if Vs>3E0R.

    Why people get this wrong: The induced part is 3ϵ0E0cos⁡θ (sphere), not ϵ0E0.

  23. NATExam level

    A spherical shell of radius R carries surface charge σ=σ0P2(cos⁡θ). The potential at its north pole (r=R, θ=0) is κσ0R/ϵ0. The value of κ is ______ (to two decimal places).
    Answer and solution

    Answer: 0.2 (±0.005)

    Try Vin=A(r/R)2P2, Vout=A(R/r)3P2. The jump in radial field at R is AR(3+2)=σ0ϵ0, so A=σ0R5ϵ0. In general Al=σlR(2l+1)ϵ0. At the pole P2=1: κ=1/5.
  24. MSQExam level

    A thin spherical surface of radius R is held at V(θ)=V0(1+cos⁡θ); there are no other charges. Which statements are correct?
    1. The total charge on the surface is 4πϵ0RV0.
    2. Far away the field is that of a point charge plus a dipole of moment 4πϵ0R2V0 along zˆ.
    3. Inside, the field is uniform, of magnitude V0/R, along −zˆ.
    4. The potential at the centre is 2V0.
    Answer and solution

    Answer: A, B, C

    Inside: V=V0+V0(r/R)cos⁡θ=V0+V0z/R, so E→=−(V0/R)zˆ and V(0)=V0. Outside: V=V0R/r+V0(R2/r2)cos⁡θ. The monopole term is Q/4πϵ0r with Q=4πϵ0RV0; the dipole term is pcos⁡θ/4πϵ0r2 with p=4πϵ0R2V0.

    Why people get this wrong: The centre potential is the average over the sphere, V0; the cos⁡θ part averages to zero.

  25. MCQExam level

    Inside a region the charge density is given. On its boundary ∂V/∂n is given everywhere (a Neumann problem). Then the potential inside is
    1. determined uniquely
    2. determined up to an additive constant
    3. determined only if the boundary is a conductor
    4. not determined at all
    Answer and solution

    Answer: B

    If V1 and V2 both work, U=V1−V2 is harmonic with ∂U/∂n=0 on the boundary. Green's identity gives ∫|∇U|2dV=∮U∂U/∂ndA=0, so ∇U=0 and U is a constant. The fields agree exactly; the potentials may differ by a constant. (The data must also satisfy Gauss's law: ∮∂V/∂ndA=−Qenc/ϵ0.)
  26. MCQExam level

    A long hollow cylinder of radius R has its surface held at V0cos⁡2ϕ, with no charge inside. The potential inside is
    1. V0(s/R)cos⁡2ϕ
    2. V0(R/s)2cos⁡2ϕ
    3. V0cos⁡2ϕ everywhere
    4. V0(s/R)2cos⁡2ϕ
    Answer and solution

    Answer: D

    The 2D solutions are s±ncos⁡nϕ. With n=2 and the origin inside, only s2 is finite: V=V0(s/R)2cos⁡2ϕ=V0(x2−y2)/R2, which is harmonic and matches the surface.

    Why people get this wrong: (R/s)2 is the exterior solution; it blows up on the axis.

  27. NATExam level

    A long hollow cylinder of radius R has its surface held at V0sin2⁡ϕ with V0=80 V, and there is no charge inside. The potential at s=R/2, ϕ=0 is ______ V.
    Answer and solution

    Answer: 30 (±0.01)

    sin2⁡ϕ=12−12cos⁡2ϕ. Inside: V=V02−V02(sR)2cos⁡2ϕ. At s=R/2, ϕ=0: 40−40×14=30 V.

    Why people get this wrong: The surface value at ϕ=0 is zero, but the interior point is not: the constant part V0/2 fills the whole inside.

  28. MCQExam level

    Which of these products is NOT a solution of the two-dimensional Laplace equation?
    1. excos⁡y
    2. e2xsin⁡2y
    3. e3xcos⁡4y
    4. cosh⁡xcos⁡y
    Answer and solution

    Answer: C

    For eaxcos⁡by (or sin⁡by, or cosh⁡ax), ∇2=(a2−b2)× the function. It vanishes only when a=b. e3xcos⁡4y has 9−16=−7≠0.

    Why people get this wrong: cosh⁡xcos⁡y is fine: cosh⁡ is a sum of e±x, each with a=b=1.

  29. NATExam level

    A cubical box of side a has five faces grounded; the face z=a is held at V0sin⁡(πx/a)sin⁡(πy/a) with V0=100 V. The potential at the centre of the box is ______ V (to one decimal place).
    Answer and solution

    Answer: 10.7 (±0.1)

    V=V0sin⁡πxasin⁡πyasinh⁡γzsinh⁡γa with γ2=(π/a)2+(π/a)2, so γa=π2=4.443. At the centre: 100×sinh⁡2.221sinh⁡4.443=100×4.55842.51=10.7 V.

    Why people get this wrong: In 3D the decay constant is kx2+ky2, faster than in 2D; using π/a gives 19.9 V.

  30. MCQExam level

    Near the sharp edge of a thin, flat conducting sheet held at a fixed potential, the surface charge density varies with the distance s from the edge as
    1. s−1/2
    2. s−1
    3. s1/2
    4. ln⁡s
    Answer and solution

    Answer: A

    Around an edge the charge-free region spans an angle β=2π. Solutions vanishing on both faces are sπ/βsin⁡(πϕ/β)=s1/2sin⁡(ϕ/2), so E∝s−1/2 and σ=ϵ0E∝s−1/2: large but integrable, so the total charge is finite.

    Why people get this wrong: 1/s would put infinite charge near the edge.

← All topics · Timed mock test →