Dielectric and optical properties of solids
Solid state physics and devices · 74 questions and templates for GATE Physics, in order from warm-up to top rank. Check each answer, then read the full solution.
Loading questions… (they need JavaScript; nothing you type is sent anywhere)
Written questions with solutions
The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.
-
MCQWarm-up
In a cubic crystal (or an isotropic medium) with macroscopic field and polarisation , the Lorentz local field acting on an atom isAnswer and solution
Answer: C
Cut a small sphere round the atom. The rest of the medium acts through the macroscopic field plus the field of the charges on the sphere's surface, . In a cubic arrangement the dipoles inside the sphere give zero net field. So .Why people get this wrong: is the depolarising field inside a uniformly polarised sphere; the cavity field has the opposite sign.
-
MCQWarm-up
Which polarisation mechanism still responds to visible light (about Hz)?- Orientational (permanent dipoles turning)
- Ionic (ions moving against each other)
- Electronic (electron clouds shifting against nuclei)
- Space charge (carriers piling up at interfaces)
Answer and solution
Answer: C
Each mechanism can follow the field only below its own natural frequency. Orientation of molecules relaxes at about 10⁹ to 10¹¹ Hz (microwaves), ions vibrate at 10¹² to 10¹³ Hz (infrared), and electron clouds resonate in the ultraviolet (10¹⁵ to 10¹⁶ Hz). At optical frequencies only the electronic part is left, so ε(optical) = n².Why people get this wrong: Ionic polarisation dies out above the infrared phonon frequencies, well below visible light.
-
MCQWarm-up
For light of angular frequency above the plasma frequency , a free-electron metal- reflects almost all the light
- becomes transparent
- absorbs all the light within one wavelength
- becomes a superconductor
Answer and solution
Answer: B
With negligible damping, . Below it is negative, is imaginary and the wave is reflected. Above , , is real and the wave propagates: alkali metals become transparent in the ultraviolet.Why people get this wrong: Metals reflect visible light because visible frequencies lie below ωp, not because metals always reflect.
-
MCQWarm-up
The plasma frequency of a free-electron gas depends on the electron density asAnswer and solution
Answer: B
: a slab of electrons displaced by leaves surface charges that give a field and a restoring force per electron. So .Why people get this wrong: is how the Fermi wave vector scales, not the plasma frequency.
-
NATWarm-up
A material has extinction coefficient at a wavelength of nm (in vacuum). Its intensity absorption coefficient is ______ m (two decimal places).Answer and solution
Answer: 2.51 × 10⁵ m⁻¹ (±0.01)
The field decays as , so the intensity decays as : m. The light falls to in about 4 μm.Why people get this wrong: Forgetting the factor 2 between field and intensity.
-
MCQWarm-up
Water has a static dielectric constant near 80, yet its refractive index for visible light is only 1.33. The reason is that- the refractive index is measured at a different temperature
- water is magnetic at optical frequencies
- the electronic polarisability of water is negative
- the permanent dipoles of water molecules cannot turn fast enough to follow optical fields
Answer and solution
Answer: D
at the frequency of the light. The huge static value comes from orientational polarisation of the permanent dipoles, which relaxes at about Hz. At Hz only electronic polarisation remains, giving .Why people get this wrong: Maxwell's relation holds, but with taken at the same frequency.
-
MCQWarm-up
A transparent, non-magnetic crystal has relative permittivity at the frequency of visible light. Its refractive index isAnswer and solution
Answer: B
For a non-magnetic medium (), . The here must be the value at optical frequency; static values can be much larger (for water, against ).Why people get this wrong: is the square root of , not equal to it.
-
NATStandard
For a cubic dielectric, , where is the number density of atoms and their polarisability. Using the Clausius-Mossotti relation, its dielectric constant is ______ (two decimal places).Answer and solution
Answer: 1.75 (±0.01)
, so . Without the local-field correction one would get .Why people get this wrong: Using ignores the Lorentz field, valid only for dilute gases.
-
MCQStandard
Molecules with permanent dipole moment in a weak field at temperature contribute an orientational polarisability (Langevin-Debye) ofAnswer and solution
Answer: A
The mean dipole along the field is with the Langevin function for small . So and , falling as because heat randomises the dipoles.Why people get this wrong: The 1/3 comes from averaging cos²θ over all directions in 3D.
-
NATStandard
Copper has conduction electrons per m. Treating them as free electrons, the plasmon energy is ______ eV (one decimal place).Answer and solution
Answer: 10.8 eV (±0.1)
rad/s. eV. (Copper's red colour comes from d-band transitions near 2 eV, not from the free-electron edge.)Why people get this wrong: Dividing by : uses the angular frequency.
-
MCQStandard
In the Drude model with collision rate , the dielectric function of a metal is . In the limit it becomesAnswer and solution
Answer: C
Dropping against leaves : real, negative below , zero at (where longitudinal plasma oscillations live) and positive above.Why people get this wrong: The free-electron term lowers ε; electrons respond out of phase above their (zero) natural frequency.
-
NATStandard
Silicon has refractive index and negligible absorption at m. The fraction of light reflected at normal incidence from air is ______ % (one decimal place).Answer and solution
Answer: 29.8 % (±0.1)
: about 30%, which is why silicon solar cells need anti-reflection coatings.Why people get this wrong: Forgetting to square , which gives the amplitude ratio (55%).
-
MCQStandard
For Debye relaxation, (sign convention aside). The imaginary part (dielectric loss) is largest whenAnswer and solution
Answer: A
. With , at . The peak value is , and there is halfway between and .Why people get this wrong: At very low or very high frequency there is no loss: the dipoles either follow perfectly or do not move at all.
-
MSQStandard
For a polar ionic solid, which statements about from DC to the ultraviolet are correct?- rises in steps as the frequency increases.
- Each drop in comes with a peak in the loss .
- At visible frequencies, is close to .
- Orientational polarisation is the last mechanism to drop out.
Answer and solution
Answer: B, C
As frequency rises, mechanisms drop out one by one (orientational near microwaves, ionic in the infrared, electronic in the ultraviolet), so falls in steps, each marked by absorption (Kramers-Kronig ties every change in to a loss feature). At optical frequencies only electrons respond, so . Orientation is the slowest, so it is the first to go, not the last.Why people get this wrong: The steps go down, not up, as frequency rises.
-
NATStandard
In the simplest model an atom is a point nucleus inside a uniform electron cloud of radius , which gives . For nm, is ______ F m (two decimal places).Answer and solution
Answer: 1.11 × 10⁻⁴⁰ F m² (±0.01)
Shifting the nucleus by inside a uniform sphere of charge gives a restoring field ; balance with : . So F m.Why people get this wrong: Often quoted as the "polarisability volume" ; do not mix the two.
-
MCQStandard
Which statement about piezoelectric, pyroelectric and ferroelectric crystals is correct?- Every piezoelectric crystal is ferroelectric.
- Every pyroelectric crystal is ferroelectric.
- A crystal with a centre of inversion can be piezoelectric.
- Every ferroelectric crystal is both pyroelectric and piezoelectric.
Answer and solution
Answer: D
A ferroelectric has a spontaneous polarisation that can be reversed by a field. Spontaneous polarisation makes it pyroelectric (P changes with T), and a polar crystal lacks inversion symmetry, so it is piezoelectric. The reverse fails: quartz is piezoelectric but not pyroelectric, and tourmaline is pyroelectric but its polarisation cannot be switched.Why people get this wrong: The sets nest: ferroelectric ⊂ pyroelectric ⊂ piezoelectric ⊂ non-centrosymmetric.
-
MCQStandard
Just above the band gap of a direct-gap semiconductor (allowed transitions), the absorption coefficient varies with photon energy asAnswer and solution
Answer: B
Vertical transitions connect states with the same ; the joint density of states of two parabolic bands grows as , like a 3D density of states. With a constant matrix element, .Why people get this wrong: is the phonon-assisted indirect edge; is the direct but forbidden case.
-
MSQStandard
A material has complex refractive index and is studied with light of vacuum wavelength . Which statements are correct?- The reflectance at normal incidence from vacuum is .
- The intensity absorption coefficient is .
- and .
- A material with reflects no light at all.
Answer and solution
Answer: A, B, C
The Fresnel formula with complex gives the first expression. The field decays as , so the intensity as . Squaring gives . With there is no absorption, but there is still reflection whenever : glass with reflects .Why people get this wrong: Transparent does not mean non-reflecting; reflection comes from the index step.
-
NATExam level
A non-polar liquid has molecules per m, each of polarisability F m. Using the Clausius-Mossotti relation, its dielectric constant is ______ (three decimal places).Answer and solution
Answer: 1.532 (±0.002)
. . Ignoring the local field would give : the correction matters in dense media.Why people get this wrong: Using alone () is the dilute-gas formula.
-
NATExam level
Sodium has free electrons per m. In the free-electron model it becomes transparent for wavelengths shorter than ______ nm (nearest whole number).Answer and solution
Answer: 205 nm (±2)
rad/s, so m nm, close to the measured 210 nm: alkali metals are transparent in the ultraviolet.Why people get this wrong: Using without the gives 33 nm.
-
MCQExam level
An ionic crystal has dielectric function (no damping). For , infrared light at normal incidence is- transmitted with no loss
- totally reflected, because ε is negative and the refractive index is purely imaginary
- absorbed only at exactly ω = ω_L
- reflected with R = ((√ε∞ − 1)/(√ε∞ + 1))²
Answer and solution
Answer: B
Between the poles and zeros, numerator and denominator have opposite signs, so . Then and has : total reflection. This "reststrahlen" band was used to make narrow-band infrared filters by multiple reflections.Why people get this wrong: At , (a longitudinal mode), not a peak in absorption; the absorption peak is at .
-
NATExam level
GaAs has , and a transverse optical phonon at THz. By the Lyddane-Sachs-Teller relation, the longitudinal optical phonon frequency is ______ THz (two decimal places).Answer and solution
Answer: 8.7 THz (±0.01)
, so THz. The split is small because GaAs is only weakly ionic.Why people get this wrong: The ratio of the dielectric constants equals the ratio of squared frequencies.
-
MCQExam level
The Kramers-Kronig relations connect and . They follow from- energy conservation in the absorber
- time-reversal symmetry of the microscopic equations
- causality: the polarisation cannot respond before the field is applied
- the Lorentz local-field correction
Answer and solution
Answer: C
Causality makes the response function vanish for , so is analytic in the upper half of the complex plane. Cauchy's theorem then gives each part as a principal-value integral of the other, e.g. .Why people get this wrong: Time reversal gives the parity of each part (ε′ even, ε″ odd in ω), not the integral relations.
-
NATExam level
Copper has DC conductivity S/m. At GHz, where , the skin depth is ______ m (two decimal places).Answer and solution
Answer: 2.09 μm (±0.01)
. , so m.Why people get this wrong: Using f instead of ω = 2πf makes δ √(2π) times too large.
-
NATExam level
A polar liquid follows Debye relaxation with and . The loss tangent at the frequency where is largest is ______ (two decimal places).Answer and solution
Answer: 0.88 (±0.01)
At : and . .Why people get this wrong: is not largest at (it peaks at ); the question asks at the peak.
-
NATExam level
In a semiconductor with and electron-hole reduced mass , the hydrogen-like (Wannier) exciton ground-state binding energy is ______ meV (two decimal places).Answer and solution
Answer: 5.22 meV (±0.02)
Scale hydrogen: meV. The Bohr radius grows by , to 11 nm, so the exciton spans many cells and the continuum model is consistent.Why people get this wrong: The dielectric constant enters squared in the energy (once from each factor of in ).
-
MCQExam level
For a Lorentz oscillator medium, . In the narrow band around (of width about ),- the refractive index rises with frequency and absorption is negligible
- the medium is perfectly transparent
- the refractive index falls with increasing frequency (anomalous dispersion) and absorption is strong
- the group velocity equals c exactly
Answer and solution
Answer: C
Away from resonance rises with (normal dispersion). Within about of , swings from its maximum down through its minimum as increases, so falls with frequency, while (absorption) peaks at . Anomalous dispersion and absorption always go together, as Kramers-Kronig requires.Why people get this wrong: Normal dispersion (n rising with ω, as in glass in the visible) is the behaviour far below an ultraviolet resonance.
-
NATExam level
A cubic glass has refractive index in the visible. Using the Lorentz-Lorenz form of the Clausius-Mossotti relation, for its electronic polarisability is ______ (three decimal places).Answer and solution
Answer: 0.294 (±0.001)
At optical frequencies , so .Why people get this wrong: Putting instead of into the relation.
-
MCQExam level
An ionic crystal has and its LO phonon frequency is exactly twice its TO phonon frequency. Its static dielectric constant is- 6
- 12
- 1.5
- 0.75
Answer and solution
Answer: B
LST: . The ionic displacement adds to the electronic 3 at low frequency.Why people get this wrong: Forgetting to square the frequency ratio gives 6.
-
MCQExam level
For a collisionless free-electron metal, . For the normal-incidence reflectance from vacuum is- about
- exactly
- with
Answer and solution
Answer: C
Below , , so is purely imaginary. Then : the wave is evanescent inside and all the energy is reflected. Collisions make slightly less than 1 in real metals.Why people get this wrong: An imaginary index does not mean absorption here: with no damping there is nowhere for the energy to go.