Home / Courses / GATE Physics / Practice / Fields in matter: polarisation and magnetisation

Fields in matter: polarisation and magnetisation

Electricity and magnetism · 82 questions and templates for GATE Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Fields in matter: polarisation and magnetisation.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    A dielectric with polarisation P→ is equivalent, for its field, to bound charges with densities
    1. ρb=∇⋅P→ and σb=−P→⋅nˆ
    2. ρb=−∇⋅P→ and σb=P→⋅nˆ
    3. ρb=−∇×P→ and σb=P→×nˆ
    4. ρb=|P→| and σb=0
    Answer and solution

    Answer: B

    The potential of the dipoles is 14πϵ0∫P→⋅𝓇ˆ𝓇2dτ. Writing 𝓇ˆ/𝓇2=∇′(1/𝓇) and integrating by parts gives a surface term with σb=P→⋅nˆ (nˆ outward) and a volume term with ρb=−∇⋅P→. Where P→ spreads out, positive ends leave and negative charge is left behind.
  2. MCQWarm-up

    A magnetised body with magnetisation M→ is equivalent to bound currents
    1. J→b=∇⋅M→, K→b=M→⋅nˆ
    2. J→b=−∇×M→, K→b=nˆ×M→
    3. J→b=∇×M→, K→b=M→×nˆ
    4. J→b=μ0M→, K→b=0
    Answer and solution

    Answer: C

    From A→=μ04π∫M→×𝓇ˆ𝓇2dτ and an integration by parts: volume current J→b=∇×M→ and surface current K→b=M→×nˆ (outward normal). For uniform M→ only the surface current survives, like the winding of a solenoid.

    Why people get this wrong: The order in M→×nˆ matters: nˆ×M→ has the opposite sign.

  3. NATWarm-up

    In a linear dielectric of susceptibility χe=2.0, the field is 1000 V/m. The polarisation is ______ nC/m2 (to one decimal place).
    Answer and solution

    Answer: 17.7 (±0.1)

    P=ϵ0χeE=8.854×10−12×2.0×1000=1.77×10−8 C/m2=17.7 nC/m2.
  4. MCQWarm-up

    Which field has a divergence equal to the free charge density alone?
    1. E→
    2. P→
    3. ϵ0E→−P→
    4. D→=ϵ0E→+P→
    Answer and solution

    Answer: D

    ϵ0∇⋅E→=ρf+ρb=ρf−∇⋅P→, so ∇⋅(ϵ0E→+P→)=ρf.
  5. MCQWarm-up

    A thin, wide slab is uniformly polarised with P→ normal to its faces, with no free charge anywhere. The field inside it is
    1. −P→/ϵ0
    2. −P→/3ϵ0
    3. −P→/2ϵ0
    4. zero
    Answer and solution

    Answer: A

    The faces carry σb=±P, like a parallel-plate capacitor: inside E=P/ϵ0 pointing from the + face to the − face, i.e. opposite to P→. Equivalently D→=0 (no free charge, slab geometry), so E→=−P→/ϵ0. Depolarising factor 1 (sphere: 1/3; needle along its axis: 0).
  6. NATWarm-up

    Inside a magnetic material B=1.00 T and M=7.0×105 A/m along the same direction. H is ______ kA/m (to one decimal place).
    Answer and solution

    Answer: 95.8 (±0.2)

    H=B/μ0−M=1.001.2566×10−6−7.0×105=7.958×105−7.0×105=9.58×104 A/m.
  7. NATStandard

    A sphere of radius R has polarisation P→=kr2rˆ. The bound volume charge density at r=R/2 is κkR. The value of κ is ______.
    Answer and solution

    Answer: -2 (±0.001)

    ρb=−1r2ddr(r2⋅kr2)=−4kr3r2=−4kr. At r=R/2: −2kR. (Check: total volume charge −4πkR4 cancels the surface charge σb=kR2 times 4πR2.)
  8. MCQStandard

    A slab 0<z<d has polarisation P→=P0(z/d)zˆ. Its bound charges are
    1. ρb=0; σb=+P0 at z=d and −P0 at z=0
    2. ρb=+P0/d; σb=−P0 at z=d, 0 at z=0
    3. ρb=−P0/d; σb=+P0 at z=d, 0 at z=0
    4. ρb=−P0/d; σb=+P0 at both faces
    Answer and solution

    Answer: C

    ρb=−dPz/dz=−P0/d. Top face (nˆ=zˆ): σb=P(d)=P0. Bottom face (nˆ=−zˆ): σb=−P(0)=0. Per unit area: −P0+P0+0=0, as it must be for a neutral body.
  9. NATStandard

    A long cylinder of linear dielectric (ϵr=3) lies with its axis perpendicular to a uniform field of 600 V/m. The field inside the cylinder is ______ V/m.
    Answer and solution

    Answer: 300 (±0.5)

    Separation in polar coordinates: inside V=−Ascos⁡ϕ, outside V=−E0scos⁡ϕ+Bcos⁡ϕ/s. Continuity of V and of ϵ∂V/∂s at s=R give A=2E0ϵr+1: a uniform field 2×600/4=300 V/m.

    Why people get this wrong: The sphere formula 3E0/(ϵr+2) gives 360 V/m; a cylinder in a transverse field has depolarising factor 1/2, not 1/3.

  10. MCQStandard

    Inside a uniformly magnetised material (fields B→, H→, magnetisation M→), a long thin needle-shaped cavity is cut along M→. The field B→ in the cavity is
    1. B→
    2. μ0H→
    3. B→−23μ0M→
    4. zero
    Answer and solution

    Answer: B

    Removing a needle along M→ removes a thin cylinder of magnetisation, i.e. its surface current M per length round the long sides, which made a solenoid field μ0M inside. So B→cav=B→−μ0M→=μ0H→. (A thin disc cut normal to M→ has negligible side current: B→cav=B→. These two cavities are how H→ and B→ were first defined operationally.)
  11. NATStandard

    In a cubic dielectric crystal with ϵr=2.5 the macroscopic field is 1000 V/m. The Lorentz local field acting on a molecule is ______ V/m.
    Answer and solution

    Answer: 1500 (±1)

    E→loc=E→+P→3ϵ0 (cubic symmetry: the near neighbours add nothing). P=ϵ0(ϵr−1)E, so Eloc=E(1+ϵr−13)=1000×1.5=1500 V/m.
  12. MCQStandard

    A long cylinder of radius R (axis z) has magnetisation M→=kszˆ, with s the distance from the axis. Its bound currents are
    1. J→b=−kϕˆ and K→b=kRϕˆ
    2. J→b=kϕˆ and K→b=−kRϕˆ
    3. J→b=2kzˆ and K→b=−kRzˆ
    4. J→b=0 and K→b=kRϕˆ
    Answer and solution

    Answer: A

    ∇×(Mzzˆ)=−∂Mz∂sϕˆ=−kϕˆ. On the curved surface K→b=M→×sˆ=kRzˆ×sˆ=kRϕˆ. Per unit length the volume current −kR cancels the surface current +kR: bound currents never carry net current through a cross-section.
  13. MSQStandard

    At an interface carrying free surface charge σf and free surface current K→f, which statements are correct?
    1. The tangential part of H→ jumps by |K→f| (in the direction perpendicular to K→f).
    2. The normal component of B→ is continuous.
    3. The normal component of D→ jumps by σf.
    4. The tangential part of E→ jumps by σf/ϵ0.
    Answer and solution

    Answer: A, B, C

    Pillboxes: ∇⋅D→=ρf gives D2⟂−D1⟂=σf; ∇⋅B→=0 gives B⟂ continuous. Loops: ∇×H→=J→f gives nˆ×(H→2−H→1)=K→f; ∇×E→=0 (statics) keeps E∥ continuous whatever the surface charge.
  14. NATStandard

    A sphere of linear dielectric with ϵr=5 sits in a uniform field of 1000 V/m. The largest bound surface charge density on it is ______ nC/m2 (to one decimal place).
    Answer and solution

    Answer: 15.2 (±0.1)

    Inside, E→=3ϵr+2E→0 and P→=ϵ0(ϵr−1)E→=3ϵ0ϵr−1ϵr+2E→0, uniform. σb=Pcos⁡θ, largest at the poles: 3×8.854×10−12×47×1000=1.52×10−8 C/m2.

    Why people get this wrong: Using the outside field E0 in P=ϵ0χE overestimates P; the field inside is reduced.

  15. MCQStandard

    A superconducting sphere expels a uniform field B0 completely (it behaves as μr=0). The field just outside its surface on the equator is
    1. B0
    2. 2B0
    3. zero
    4. 32B0
    Answer and solution

    Answer: D

    Outside, ΦM must give Br=0 at r=R: B→=B0zˆ plus a dipole of moment −2πR3B0/μ0. On the surface Bθ=−32B0sin⁡θ, so on the equator |B|=32B0; at the poles it is zero. The field lines crowd round the sides.

    Why people get this wrong: A conducting sphere in an electric field gives 3E0 at the poles; the superconductor gives 32B0 at the equator.

  16. NATStandard

    A linear dielectric with ϵr=4.0 carries a field of 1.0×105 V/m. The electrostatic energy density, 12D→⋅E→, is ______ J/m3 (to three decimal places).
    Answer and solution

    Answer: 0.177 (±0.002)

    u=12ϵ0ϵrE2=0.5×4×8.854×10−12×1010=0.177 J/m3. It counts the work done to polarise the material as well as the vacuum field energy.
  17. NATExam level

    A point charge of +1.0 nC sits at the centre of a thick spherical shell of linear dielectric (ϵr=3) with inner radius 1.0 cm. The bound surface charge density on the inner surface is ______ nC/m2 (to the nearest whole number).
    Answer and solution

    Answer: -531 (±3)

    By symmetry D=q/4πr2 everywhere. In the shell P=ϵ0χeE=χe1+χeD=ϵr−1ϵrq4πr2, radially out. On the inner surface nˆ=−rˆ: σb=−P(a)=−2310−94π×10−4=−5.31×10−7 C/m2.

    Why people get this wrong: The inner surface normal points towards the centre, so its bound charge is negative.

  18. MCQExam level

    A point charge is inside a large block of linear dielectric (ϵr>1), near its flat surface with vacuum. The force on the charge is
    1. towards the surface
    2. away from the surface, into the dielectric
    3. zero, since the medium is uniform around it
    4. towards the surface only if the charge is negative
    Answer and solution

    Answer: B

    For a charge in medium 1 near medium 2, the field in medium 1 is that of q and an image q′=−qϵ2−ϵ1ϵ2+ϵ1. With ϵ1=ϵrϵ0>ϵ2=ϵ0: q′=+qϵr−1ϵr+1, same sign as q, so the charge is repelled from the surface whatever its sign. Ions in water avoid the water-air surface.

    Why people get this wrong: Near a conductor or a denser dielectric a charge is attracted; near a less polarisable medium it is repelled.

  19. NATExam level

    A charge of 1.0 nC is in a large block of dielectric with ϵr=4, 1.0 cm from its flat surface with vacuum. The magnitude of the force on it is ______ μN (to two decimal places).
    Answer and solution

    Answer: 3.37 (±0.03)

    Image q′=qϵr−1ϵr+1=0.6q at 1.0 cm beyond the surface, acting in the medium of permittivity 4ϵ0: F=qq′4π(4ϵ0)(2d)2=8.99×1094×0.6×10−184×10−4=3.37×10−6 N, repulsive.

    Why people get this wrong: The force is computed with ϵ1=ϵrϵ0 of the medium the charge is in.

  20. MSQExam level

    In a region with no free current, the magnetic scalar potential ΦM is defined by H→=−∇ΦM. Which statements are correct?
    1. H→ can be written this way wherever J→f=0 (and ∂D→/∂t=0).
    2. ∇2ΦM=∇⋅M→, so ρM=−∇⋅M→ acts as a source for H→.
    3. Inside a permanent magnet B→ is curl-free.
    4. A uniformly magnetised body acts on H→ like surface "magnetic charge" σM=M→⋅nˆ.
    Answer and solution

    Answer: A, B, D

    ∇×H→=J→f=0 allows a scalar potential. ∇⋅B→=0 gives ∇⋅H→=−∇⋅M→, so −∇2ΦM=−∇⋅M→: the magnetic analogue of ρb, σb. But ∇×B→=μ0∇×M→=μ0J→b≠0 where M→ varies (and at its surface).
  21. NATExam level

    A long rod is uniformly magnetised perpendicular to its axis with M=1.0×106 A/m, with no free current. The magnetic field B inside it is ______ T (to three decimal places).
    Answer and solution

    Answer: 0.628 (±0.003)

    For a long cylinder magnetised transversely the demagnetising factor is N=12: H→in=−12M→ and B→=μ0(H→+M→)=12μ0M→=0.5×1.2566×10−6×106=0.628 T.

    Why people get this wrong: Sphere: 23μ0M. Rod along its axis: μ0M. Rod across: 12μ0M.

  22. MCQExam level

    A spherical cavity is cut in an infinite linear dielectric (ϵr); far away the field is uniform, E0. The field inside the cavity is
    1. 3E0ϵr+2
    2. 3ϵrE02ϵr+1
    3. ϵrE0
    4. E0
    Answer and solution

    Answer: B

    Same separation as for a dielectric sphere with the permittivities swapped: the inner region has ϵ0 and the outer ϵrϵ0. Replacing ϵr by 1/ϵr in 3E0/(ϵr+2) gives 3E01/ϵr+2=3ϵrE02ϵr+1, larger than E0 (between E0 and 1.5E0).

    Why people get this wrong: The sphere result 3E0/(ϵr+2) applies to a dielectric ball in vacuum, the opposite case.

  23. NATExam level

    A spherical air bubble sits in a large block of dielectric with ϵr=4 in which the far field is 100 V/m. The field inside the bubble is ______ V/m (to one decimal place).
    Answer and solution

    Answer: 133.3 (±0.3)

    Ecav=3ϵrE02ϵr+1=3×4×1009=133.3 V/m. Breakdown therefore starts in voids inside insulation.
  24. NATExam level

    A helium atom has polarisability volume α/4πϵ0=0.205 Å3. Modelling it as a conducting sphere (α=4πϵ0R3), the effective radius is ______ Å (to two decimal places).
    Answer and solution

    Answer: 0.59 (±0.01)

    A conducting sphere in E0 gains p=4πϵ0R3E0, so α/4πϵ0=R3 and R=(0.205)1/3=0.59 Å, close to the size of the helium electron cloud (its Bohr-like radius is about 0.3 Å, the cloud extends further).
  25. MCQExam level

    For a dilute gas of polar molecules (number density N, permanent moment p, induced polarisability α), the Langevin-Debye susceptibility is
    1. χe=Nαϵ0, independent of temperature
    2. χe=Np2ϵ0kBT
    3. χe=Nϵ0(α+p23kBT)
    4. χe=Nϵ0(α+3p2kBT)
    Answer and solution

    Answer: C

    Induced part NαE. Orientation: the Langevin average ⟨cos⁡θ⟩=L(pE/kBT)≈pE/3kBT for weak fields, giving Np2E/3kBT. So χe=Nϵ0(α+p23kBT): plotting χe against 1/T gives α from the intercept and p from the slope.
  26. NATExam level

    A molecule has permanent moment 6.2×10−30 C m and polarisability volume α/4πϵ0=1.45×10−30 m3. At 300 K, the ratio of the orientational term p2/3kBT to the induced term α is ______ (to one decimal place).
    Answer and solution

    Answer: 19.2 (±0.2)

    α=4πϵ0×1.45×10−30=1.61×10−40 C m2/V. p2/3kBT=3.84×10−593×1.381×10−23×300=3.09×10−39. Ratio =19.2: for a strongly polar molecule orientation dominates at room temperature.
  27. MSQExam level

    A free point charge q is embedded in a linear dielectric ϵr that fills all space. Which statements are correct?
    1. E→ is reduced by the factor ϵr compared with vacuum.
    2. D→ is the same as ϵ0E→ would be in vacuum.
    3. Bound charge −q(ϵr−1)/ϵr collects at the surface of the charge.
    4. A finite, neutral dielectric body can carry non-zero total bound charge.
    Answer and solution

    Answer: A, B, C

    Spherical symmetry: D=q/4πr2, E=D/ϵrϵ0. The dielectric is uniform, so ρb=0 in its bulk; the bound charge sits at the cavity around q: −P(a)⋅4πa2=−q(ϵr−1)/ϵr, which screens q to q/ϵr. For any finite neutral body, ∫ρbdτ+∮σbda=−∫∇⋅P→+∮P→⋅da→=0.
  28. MCQExam level

    A spherical shell of radius R carries uniform surface charge σ and spins at angular velocity ωzˆ. Its field inside is uniform, of size
    1. 23μ0σRω
    2. μ0σRω
    3. 13μ0σRω
    4. 12μ0σRω
    Answer and solution

    Answer: A

    The surface current K→=σv→=σωRsin⁡θϕˆ is exactly the bound current M→×nˆ of a uniformly magnetised sphere with M=σRω. Inside such a sphere B→=23μ0M→=23μ0σRωzˆ.
  29. NATExam level

    A long cylinder of radius R has magnetisation M→=ks2ϕˆ. The bound volume current density at s=R/2 is κkR along zˆ. The value of κ is ______ (to one decimal place).
    Answer and solution

    Answer: 1.5 (±0.01)

    ∇×(Mϕϕˆ)=1sdds(sMϕ)zˆ=1sdds(ks3)zˆ=3kszˆ. At R/2: 1.5kR. The surface current K→b=M→×sˆ=−kR2zˆ returns it: ∫0R3ks2πsds=2πkR3=kR2×2πR.
  30. NATExam level

    An iron ring (μr=2000, taken as constant) of mean circumference 50 cm has a 1.0 mm air gap cut in it. It carries 500 turns with a current of 1.0 A. Ignoring fringing and leakage, the field B in the gap is ______ T (three decimal places).
    Answer and solution

    Answer: 0.503 T (±0.003)

    ∮H→⋅dl→=NI with the same B (flux) in iron and gap: Bμ0μrliron+Bμ0g=NI. So B=μ0NIliron/μr+g=4π×10−7×5000.499/2000+0.001=6.283×10−41.2495×10−3=0.503 T. About 80% of the ampere-turns are spent across the 1 mm gap.

    Why people get this wrong: Leaving out the gap gives μ0μrNI/l=2.5 T, five times too large: a thin air gap dominates the magnetic "resistance" of the circuit.

← All topics · Timed mock test →