Home / Courses / GATE Physics / Practice / Geometrical optics: mirrors, lenses and systems

Geometrical optics: mirrors, lenses and systems

Oscillations, waves and optics · 7 questions and templates for GATE Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MSQHard

    Which statements about the cardinal points of a thick lens are correct?
    1. For a lens in air the nodal points coincide with the principal points.
    2. The equivalent focal length is measured from the principal planes.
    3. For a thin lens both principal planes lie at the lens.
    4. The front and back focal distances (measured from the lens surfaces) are always equal.
    Answer and solution

    Answer: A, B, C

    Nodal points coincide with principal points when the media on both sides are the same. Focal lengths are measured from the principal planes, which for a thin lens merge at the lens. The distances from the surfaces to the foci (back and front focal distances) differ in general, for example for a plano-convex lens turned either way, even though the equivalent focal length is the same.
  2. MCQHard

    Two thin convex lenses, each of focal length f, are placed on a common axis a distance 2f apart. The combination
    1. is afocal: a parallel beam comes out parallel
    2. has focal length f/2
    3. has focal length f
    4. has focal length 2f
    Answer and solution

    Answer: A

    For two thin lenses a distance d apart, 1F=1f1+1f2−df1f2=2f−2ff2=0. So F is infinite: a parallel beam focuses at the first lens's focus, which is the second lens's focus, and leaves parallel again (inverted). This is a Keplerian telescope with unit magnification.

    Why people get this wrong: Using the contact formula (F=f/2) ignores the separation.

  3. MCQHard

    A transparent sphere of radius R focuses a parallel paraxial beam exactly on its back surface. Its refractive index is
    1. 1.5
    2. 2
    3. 2
    4. 2.5
    Answer and solution

    Answer: C

    At the first surface, nv−1∞=n−1R, so the rays head for a point v=nRn−1 behind the front vertex. The back surface is 2R behind it, so nn−1=2, i.e. n=2. Then the rays meet on the back surface itself and the second refraction does not move that point.

    Why people get this wrong: Guessing ordinary glass (1.5); a glass ball focuses about R/2 beyond its back surface.

  4. NATTop rank

    A thick equiconvex glass lens (n=1.5) has radii 20 cm and a centre thickness of 3 cm. Its equivalent focal length is ______ cm (to two decimal places).
    Answer and solution

    Answer: 20.51 cm (±0.05)

    Thick-lens formula: 1f=(n−1)[1R1−1R2+(n−1)dnR1R2] with R1=20, R2=−20: 0.5[0.05+0.05−0.5×3/(1.5×400)]=0.5[0.1−0.0025]=0.04875, so f=20.51 cm (the thin-lens value is 20 cm).

    Why people get this wrong: Sign of the thickness term: with R2<0 it reduces the power of a biconvex lens.

  5. NATTop rank

    A small air bubble is inside a solid glass sphere (n=1.5, radius 10 cm), 5 cm from the centre. It is viewed from outside along the diameter through it, from the side nearer the bubble. The bubble appears ______ cm inside the surface.
    Answer and solution

    Answer: 4 cm (±0.05)

    Light goes from glass to air towards the viewer. Nearer surface: the bubble is 5 cm inside, u=−5 cm; the centre of curvature is inside the glass, R=−10 cm. 1v−1.5−5=1−1.5−10 gives 1/v=0.05−0.3=−0.25, v=−4 cm: a virtual image 4 cm inside the surface.

    Why people get this wrong: Using the flat-surface rule (depth/n=3.33 cm) ignores the curvature.

  6. MCQTop rank

    An optical system in air has ray-transfer matrix (ABCD) acting on (height, angle) from an input plane to an output plane. Which statement is correct?
    1. Its determinant equals the refractive index of glass.
    2. If A=0 the two planes are object and image planes.
    3. The power of the system is +C.
    4. If B=0 the planes are conjugate (object and image) and A is the lateral magnification.
    Answer and solution

    Answer: D

    Output height =Ayin+Bθin. If B=0, every ray from one input point reaches the same output point whatever its angle: the planes are conjugate and A is the magnification. Between equal media det⁡=AD−BC=1. The power is −C (a converging lens has C=−1/f). A=0 means the output plane is the back focal plane.
  7. MSQTop rank

    A paraxial system in air is described by (y2θ2)=(ABCD)(y1θ1). Which statements are true?
    1. AD−BC=1
    2. If C=0, a parallel beam comes out parallel (the system is afocal)
    3. For two systems in a row, the total matrix is M1M2, where M1 is the one the light meets first
    4. If B=0, the input and output planes are object and image planes, and A is the lateral magnification
    Answer and solution

    Answer: A, B, D

    Every translation and every thin lens has determinant 1 (the start and end media are the same), so the product does too. With C=0, θ2=Dθ1 does not depend on y1: parallel in, parallel out. With B=0, y2=Ay1 for every angle θ1, so all rays from one input point reach one output point: that is imaging, with magnification A. Matrices act on the column from the left, so the element met first stands on the right: M=M2M1.

    Why people get this wrong: Writing the matrices in the order the light meets them; the first element goes on the right.

← All topics · Timed mock test →