Home / Courses / GATE Physics / Practice / Moment of inertia and the axis theorems

Moment of inertia and the axis theorems

Mechanics and properties of matter · 17 questions and templates for GATE Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MSQExam level

    For a uniform square plate of side a and mass M, which are correct?
    1. Every axis in the plane of the plate through its centre has moment of inertia 112Ma2.
    2. About the axis through the centre perpendicular to the plate, I=16Ma2.
    3. The moment about a diagonal is larger than about a line through the centre parallel to a side.
    4. About one edge, I=13Ma2.
    Answer and solution

    Answer: A, B, D

    Parallel to a side through the centre: 112Ma2 (like a rod). B: perpendicular axis theorem, 2×112Ma2. A: the in-plane moments about axes through the centre satisfy I(α)=Ixcos2⁡α+Iysin2⁡α (no product term by symmetry), and Ix=Iy, so every direction gives the same value; C is therefore false. D: 112Ma2+M(a/2)2=13Ma2.

    Why people get this wrong: The diagonal "looks" longer, but by symmetry all in-plane central axes of a square are equal.

  2. MCQHard

    The moment of inertia of a uniform rectangular plate (sides a and b, mass M) about one of its diagonals is
    1. M(a2+b2)24
    2. Ma2b26(a2+b2)
    3. M(a2+b2)12
    4. Ma2b212(a2+b2)
    Answer and solution

    Answer: B

    For an axis in the plane through the centre at angle α to side a: I=Ixcos2⁡α+Iysin2⁡α (the product of inertia is zero by symmetry), with Ix=Mb2/12 (axis along a) and Iy=Ma2/12. Along the diagonal cos⁡α=a/d, sin⁡α=b/d, d2=a2+b2: I=M12d2(b2a2+a2b2)=Ma2b26(a2+b2). Check: a square gives Ma2/12, as it should.

    Why people get this wrong: Option C is the perpendicular axis, not the diagonal.

  3. NATHard

    Point masses of 1 kg at (1,0,0) m and 2 kg at (0,1,1) m form a rigid body. With the convention Iyz=−∑myz, the product of inertia Iyz (in kg m²) is ______.
    Answer and solution

    Answer: -2 kg m²

    Only the second mass has both y and z non-zero: Iyz=−(2×1×1)=−2 kg m². (For comparison Ixx=∑m(y2+z2)=2×2=4 kg m².)

    Why people get this wrong: Dropping the minus sign in the off-diagonal elements.

  4. NATHard

    Point masses of 1 kg at (1,0,0) m and 2 kg at (0,0,2) m. Their moment of inertia about the line through the origin along iˆ+jˆ+kˆ (in kg m²) is ______.
    Answer and solution

    Answer: 6 kg m²

    The squared distance of a point from a line through the origin along unit vector nˆ is r2−(r→⋅nˆ)2, with nˆ=(1,1,1)/3. First mass: 1−1/3=2/3 m². Second: 4−4/3=8/3 m². I=1×23+2×83=6 kg m². (Same as nˆTInˆ with the inertia tensor.)

    Why people get this wrong: Not normalising the direction vector.

  5. MSQHard

    Which statements about the inertia tensor of a rigid body are correct?
    1. It is real and symmetric, so there are always three mutually perpendicular principal axes.
    2. An axis of rotational symmetry of the body is a principal axis.
    3. For a uniform cube about its centre, every axis is principal, with I=16Ma2.
    4. The angular momentum is always parallel to the angular velocity.
    Answer and solution

    Answer: A, B, C

    A: real symmetric matrices have real eigenvalues and orthogonal eigenvectors. B: symmetry forces the products of inertia with that axis to vanish. C: by the cube's symmetry the three principal moments are equal, so the tensor is 16Ma2 times the unit matrix and every direction is an eigenvector. D: L→=Iω→ is parallel to ω→ only along a principal axis (or for an isotropic tensor).

    Why people get this wrong: C surprises many: a cube spins about a body diagonal with the same moment as about a face axis.

  6. NATHard

    A solid sphere of radius R has density proportional to the distance from its centre, ρ=kr. Its moment of inertia about a diameter is βMR2. The value of β is ______ (three decimal places).
    Answer and solution

    Answer: 0.444 (±0.005)

    A thin shell of radius r and mass dm has 23r2dm about a diameter. With dm=kr⋅4πr2dr: M=4πk∫0Rr3dr=πkR4 and I=23⋅4πk∫0Rr5dr=8πkR618=4πkR69. So I/(MR2)=4/9≈0.444, more than the uniform 0.4 because the mass is pushed outward.

    Why people get this wrong: Using r2dm (distance from the centre) for each shell instead of 23r2dm (distance from the axis) gives 23 instead of 49.

  7. MCQHard

    A uniform solid cube of mass 3 kg and side 0.2 m turns about one of its body diagonals. Its moment of inertia is
    1. 0.04 kg m²
    2. 0.02 kg m²
    3. 0.01 kg m²
    4. 0.08 kg m²
    Answer and solution

    Answer: B

    About its centre, a cube's inertia tensor is 16Ma2 times the unit matrix (all three principal moments are equal), so every axis through the centre, including a body diagonal, has I=16Ma2=3×0.046=0.02 kg m².

    Why people get this wrong: 0.08 kg m² (23Ma2) is about an edge, which does not pass through the centre.

  8. MSQHard

    A thin rigid lamina lies in the xy-plane. About axes through a point O in the plane, which are always true?
    1. Izz=Ixx+Iyy
    2. Izz≥Ixx
    3. Ixz=Iyz=0
    4. Ixx=Iyy
    Answer and solution

    Answer: A, B, C

    Every particle has z=0. A: the perpendicular axis theorem. B follows from A, since Iyy≥0. C: the products −∑mxz and −∑myz contain z, so they vanish; the z-axis is therefore always a principal axis of a lamina. D holds only for special shapes (a square or a circle about its centre, for example), not in general.
  9. MSQHard

    For a uniform solid cube of mass M and side a, which statements are true?
    1. Its moment of inertia is the same for every axis through its centre
    2. About one of its edges, I=Ma23
    3. About the axis through the centres of two opposite faces, I=Ma26
    4. About a body diagonal, I=Ma26
    Answer and solution

    Answer: A, C, D

    About the face axis, I=M12(a2+a2)=Ma26. By symmetry the inertia tensor about the centre has three equal principal values and no products, so it is Ma26 times the unit matrix: every axis through the centre, including a body diagonal, gives Ma26. About an edge (distance a/2 from the centre): Ma26+Ma22=2Ma23.

    Why people get this wrong: Expecting the body diagonal to differ from the face axis; cubic symmetry makes the tensor isotropic.

  10. MCQHard

    A uniform rectangular plate of mass M has sides a and b. Its moment of inertia about one of its diagonals is
    1. M(a2+b2)12
    2. Ma2b26(a2+b2)
    3. Mab6
    4. Ma2b212(a2+b2)
    Answer and solution

    Answer: B

    With axes along the sides through the centre, Ixx=Mb212, Iyy=Ma212, and no product of inertia. The diagonal has direction (a,b)/a2+b2, so I=Ixxcos2⁡α+Iyysin2⁡α=M12⋅b2a2+a2b2a2+b2=Ma2b26(a2+b2). For a square this gives Ma2/12, the same as about a side-parallel axis, as symmetry requires.

    Why people get this wrong: M(a2+b2)/12 is about the perpendicular axis, not an in-plane diagonal.

  11. MCQHard

    A uniform plate in the shape of a regular hexagon of side a has mass M. Its moment of inertia about the axis through its centre perpendicular to the plate is
    1. 12Ma2
    2. 13Ma2
    3. 16Ma2
    4. 512Ma2
    Answer and solution

    Answer: D

    Split the hexagon into six equilateral triangles of side a and mass m=M/6. About its own centroid (perpendicular axis) each has ma2/12, and its centroid is a/3 from the hexagon's centre. Parallel axis theorem: m(a212+a23)=512ma2. Six of them: 512Ma2. (Compare a disc of radius a: 12Ma2; the hexagon's corners lie on that circle but its edges come inside it.)

    Why people get this wrong: 12Ma2 treats the hexagon as the disc through its corners.

  12. NATTop rank

    A uniform solid sphere of radius 2 m had a mass of 8 kg. A spherical cavity of radius 1 m is hollowed out, with its centre 1 m from the sphere's centre. Find the moment of inertia of the remaining body (in kg m²) about the axis through the sphere's centre perpendicular to the line joining the two centres.
    Answer and solution

    Answer: 11.4 kg m² (±0.01)

    Full sphere: 25×8×4=12.8 kg m². The cavity has 1/8 of the volume, so the removed mass is 1 kg. About its own centre it had 25×1×1=0.4; the axis is 1 m from the cavity's centre, so add 1×12: 1.4 kg m². Remaining: 12.8−1.4=11.4 kg m².

    Why people get this wrong: If the axis were the line joining the centres, no shift would be needed (answer 12.4); read which axis is asked.

  13. NATTop rank

    A uniform square plate of side a and mass M lies in the xy-plane with one corner at the origin and edges along the axes. Of its two principal moments of inertia about in-plane axes through that corner, the larger one is βMa2. The value of β is ______ (three decimal places).
    Answer and solution

    Answer: 0.583 (±0.003)

    About the corner: Ixx=∫y2dm=13Ma2, Iyy=13Ma2, and the product Ixy=−∫xydm=−M(a2)(a2)=−14Ma2. The in-plane block (1/3−1/4−1/41/3)Ma2 has eigenvalues (13±14)Ma2, i.e. 112Ma2 (along the diagonal through the corner) and 712Ma2≈0.583Ma2 (perpendicular to it). Check with the parallel axis theorem: 112Ma2+M(a2)2=712Ma2.

    Why people get this wrong: Answering 13: the edges are not principal axes at a corner, because the product of inertia is not zero there.

  14. NATTop rank

    A uniform solid cylinder of radius R and length L has I=12MR2 about its axis and I=M(R24+L212) about a transverse axis through its centre. For what ratio L/R is its moment of inertia the same about every axis through its centre? (three decimal places)
    Answer and solution

    Answer: 1.732 (±0.005)

    The inertia tensor is diagonal in the symmetry axes, with moments 12MR2, It, It. All axes have the same moment exactly when all three are equal: 12R2=14R2+112L2, so L2=3R2 and L/R=3≈1.732. Such a cylinder spins like a sphere (or a cube) as far as its inertia is concerned.

    Why people get this wrong: Guessing L=2R (a cylinder that "looks" like a cube) gives different moments.

  15. NATTop rank

    A uniform disc of radius 1 m had mass 4 kg. A circular hole of radius 0.5 m is cut out, with its centre 0.5 m from the disc's centre. The moment of inertia of the remaining plate about an axis through its own centre of mass, perpendicular to the plate, is ______ kg m² (three decimal places).
    Answer and solution

    Answer: 1.542 kg m² (±0.003)

    The hole has a quarter of the area, so mass 1 kg; 3 kg remain. About the original centre O: full disc 12⋅4⋅12=2; hole 12⋅1⋅0.52+1⋅0.52=0.375; remainder 1.625 kg m². Its centre of mass is at d=1×0.53=16 m on the far side of O. Parallel axis (moving towards the CM lowers I): Icm=1.625−3⋅136≈1.542 kg m².

    Why people get this wrong: Stopping at 1.625: that is about the old centre, which is no longer the centre of mass.

  16. NATTop rank

    A uniform solid cone has mass 4.0 kg, base radius 0.30 m and height 0.80 m. Its moment of inertia about a diameter of its base is ______ kg m² (three decimal places).
    Answer and solution

    Answer: 0.31 kg m² (±0.002)

    About an axis through the apex perpendicular to the cone's axis: Iapex=35M(R24+h2). The centre of mass is 34h from the apex, so Icm=Iapex−M(34h)2=320MR2+380Mh2. The base is h4 from the centre of mass: Ibase=Icm+Mh216=320MR2+110Mh2=0.054+0.256=0.310 kg m².

    Why people get this wrong: Shifting directly from the apex axis to the base with Mh2 skips the centre of mass; the parallel axis theorem must go through it.

← All topics · Timed mock test →