Home / Courses / GATE Physics / Practice / Thermodynamic potentials and Maxwell relations

Thermodynamic potentials and Maxwell relations

Kinetic theory and thermodynamics · 62 questions and templates for GATE Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    For a system made of a single kind of particle, the chemical potential μ equals
    1. the Helmholtz energy per particle, F/N
    2. the internal energy per particle, U/N
    3. the Gibbs energy per particle, G/N
    4. the enthalpy per particle, H/N
    Answer and solution

    Answer: C

    μ=(∂G/∂N)T,P. At fixed T and P, which are intensive, G can only grow in proportion to N, so G=Nμ(T,P) and μ=G/N. For F(T,V,N) the same argument fails, because V is extensive and must grow with N; so μ≠F/N in general.

    Why people get this wrong: μ=(∂F/∂N)T,V is true, but that derivative is not F/N.

  2. MCQStandard

    The Maxwell relation that follows from dF=−SdT−PdV is
    1. (∂S∂V)T=(∂P∂T)V
    2. (∂S∂V)T=−(∂P∂T)V
    3. (∂S∂P)T=−(∂V∂T)P
    4. (∂T∂V)S=−(∂P∂S)V
    Answer and solution

    Answer: A

    Mixed derivatives of F are equal: ∂∂V(∂F∂T)=∂∂T(∂F∂V), i.e. (∂(−S)∂V)T=(∂(−P)∂T)V. The two minus signs cancel.

    Why people get this wrong: Option B keeps only one of the two minus signs. C comes from G and D from U.

  3. MCQStandard

    The Maxwell relation from the Gibbs energy is
    1. (∂S∂P)T=(∂V∂T)P
    2. (∂T∂P)S=(∂V∂S)P
    3. (∂S∂V)T=(∂P∂T)V
    4. (∂S∂P)T=−(∂V∂T)P
    Answer and solution

    Answer: D

    dG=−SdT+VdP, so (∂G/∂T)P=−S and (∂G/∂P)T=V. Equal mixed derivatives: −(∂S/∂P)T=(∂V/∂T)P. Physically: most things expand when heated, so their entropy falls when squeezed.
  4. MCQStandard

    The Gibbs–Helmholtz equation gives the enthalpy from G(T,P) as
    1. H=−T2(∂G∂T)P
    2. H=G−T(∂G∂T)P
    3. H=G+T(∂G∂T)P
    4. H=G−P(∂G∂P)T
    Answer and solution

    Answer: B

    S=−(∂G/∂T)P and H=G+TS, so H=G−T(∂G/∂T)P. Equivalently H=−T2∂(G/T)/∂T at constant P.

    Why people get this wrong: Option A drops the G/T inside the derivative.

  5. MSQStandard

    For an ideal gas, which of these are zero?
    1. (∂U/∂V)T
    2. (∂H/∂P)T
    3. The Joule–Thomson coefficient (∂T/∂P)H
    4. (∂S/∂V)T
    Answer and solution

    Answer: A, B, C

    For an ideal gas U and H depend only on T, so A and B vanish, and a throttled ideal gas keeps T (C). D is nR/V, not zero: entropy grows with volume.
  6. MCQStandard

    In a process at constant temperature and pressure, the maximum useful work (other than PdV work, e.g. electrical work from a battery) a system can deliver is
    1. −ΔH
    2. −ΔU
    3. −ΔG
    4. −ΔF
    Answer and solution

    Answer: C

    With T and P fixed, dG=dU+PdV−TdS and TdS≥dQ. So −dG≥dWother, with equality for a reversible process. (−ΔF is the maximum total work at constant T.)
  7. MCQStandard

    For a system with a single kind of particle, the chemical potential μ equals
    1. the enthalpy per particle, H/N
    2. the Gibbs energy per particle, G/N
    3. the internal energy per particle, U/N
    4. the Helmholtz energy per particle, F/N
    Answer and solution

    Answer: B

    G(T,P,N) is extensive in N alone (its other variables are intensive), so G=Ng(T,P), and μ=(∂G/∂N)T,P=g=G/N. The same argument fails for F(T,V,N), since V is extensive too.
  8. MSQStandard

    For a simple one-component system with dG=−SdT+VdP+μdN, which relations are correct?
    1. V=(∂G/∂P)T,N
    2. (∂G/∂T)P,N=S
    3. CP=−T(∂2G/∂T2)P,N
    4. μ=(∂G/∂N)T,P
    Answer and solution

    Answer: A, C, D

    Read the coefficients of dG: V=∂G/∂P, μ=∂G/∂N, and ∂G/∂T=−S (minus sign), so the second relation is wrong. Then CP=T(∂S/∂T)P=−T(∂2G/∂T2)P. Because CP>0, G(T) at fixed P always curves downward.

    Why people get this wrong: The sign: G falls with temperature at fixed pressure, since S>0.

  9. NATStandard

    The surface tension of water near room temperature falls by 1.5×10−4 N m−1 per kelvin. When the area of a water surface is increased by 10 cm2 at a constant 300 K, the heat it absorbs is ______ μJ.
    Answer and solution

    Answer: 45 (±0.5)

    From dF=−SdT+σdA, (∂S/∂A)T=−dσ/dT=1.5×10−4 J m−2 K−1. Heat =TΔS=300×1.5×10−4×10×10−4=4.5×10−5 J =45 μJ. If the surface were stretched with no heat supplied, it would cool instead.

    Why people get this wrong: 10 cm2 is 10−3 m2, not 10−2.

  10. MCQStandard

    At fixed pressure, the Gibbs energy G of a substance is plotted against temperature. The curve
    1. falls with slope −S and bends downward, with curvature −CP/T
    2. rises with slope S and bends upward
    3. falls with slope −S and bends upward
    4. is a straight line, since S is constant
    Answer and solution

    Answer: A

    (∂G/∂T)P=−S<0, so G falls. (∂2G/∂T2)P=−(∂S/∂T)P=−CP/T<0, so the slope grows steeper as T rises: the curve bends downward. This is why, at a phase transition, the phase with the larger entropy (steeper curve) wins at higher temperature.

    Why people get this wrong: Positive entropy and positive heat capacity give a negative slope and a negative curvature.

  11. NATExam level

    For a liquid at 300 K, the molar volume is 1.8×10−5 m3, the expansion coefficient α=2.1×10−4 K−1 and the isothermal compressibility κT=4.5×10−10 Pa−1. Then CP−CV is ______ J mol−1 K−1.
    Answer and solution

    Answer: 0.529 J mol$^{-1}$ K$^{-1}$ (±0.005)

    CP−CV=TVα2/κT=300×1.8×10−5×(2.1×10−4)2/4.5×10−10=300×1.8×10−5×98≈0.529 J mol−1 K−1. Tiny compared with R: for liquids and solids CP≈CV.

    Why people get this wrong: Forgetting to square α.

  12. NATExam level

    For one mole of a van der Waals gas with a=0.14 Pa m6 mol−2 at molar volume 1.0×10−3 m3, the internal pressure (∂U/∂V)T is ______ kPa.
    Answer and solution

    Answer: 140 kPa (±1)

    Energy equation: (∂U/∂V)T=T(∂P/∂T)V−P. For P=RT/(V−b)−a/V2: T⋅R/(V−b)−P=a/V2=0.14/10−6=1.4×105 Pa =140 kPa.
  13. MCQExam level

    In a free (Joule) expansion into vacuum in an insulated container, a van der Waals gas
    1. keeps its temperature, because Q=W=0
    2. cools only if it is below its inversion temperature
    3. cools, because (∂U/∂V)T=an2/V2>0
    4. warms, because the molecules gain kinetic energy
    Answer and solution

    Answer: C

    U stays constant. Pulling attracting molecules apart raises their potential energy, which must come from their kinetic energy: (∂T/∂V)U=−1CV(∂U∂V)T=−an2CVV2<0.

    Why people get this wrong: D describes the Joule–Thomson (throttling) process, which is different.

  14. NATExam level

    One mole of a van der Waals gas (a=0.14 Pa m6 mol−2, CV=52R) expands freely from 1.0 L to 2.0 L in an insulated container. Its temperature changes by ______ K.
    Answer and solution

    Answer: -3.37 K (±0.04)

    U=CVT−a/V per mole stays fixed: CVΔT=a(1/V2−1/V1). So ΔT=0.1420.79(500−1000)≈−3.37 K.
  15. MCQExam level

    In a steady throttling (Joule–Thomson) process through a porous plug, the quantity that stays the same is
    1. the enthalpy
    2. the internal energy
    3. the entropy
    4. the temperature
    Answer and solution

    Answer: A

    For a parcel pushed through: U2−U1=P1V1−P2V2 (the work done by the gas behind minus the work done on the gas ahead; Q=0). So U1+P1V1=U2+P2V2: H is constant. Entropy rises, as throttling is irreversible.
  16. NATExam level

    For a van der Waals gas with a=0.14 Pa m6 mol−2 and b=3.2×10−5 m3 mol−1, the Joule–Thomson inversion temperature at low pressure is ______ K.
    Answer and solution

    Answer: 1052 K (±10)

    At low density μJT≈1CP(2aRT−b), which changes sign at Ti=2a/Rb=0.28/(8.314×3.2×10−5)≈1052 K. Below Ti the gas cools on throttling.
  17. MSQExam level

    Which statements about the Joule–Thomson coefficient μJT=(∂T/∂P)H are correct?
    1. μJT=VCP(Tα−1), with α the expansion coefficient
    2. μJT=0 for an ideal gas
    3. If μJT>0, the gas cools as it passes through the throttle
    4. Every gas cools in a Joule–Thomson expansion
    Answer and solution

    Answer: A, B, C

    A: from dH=CPdT+[V−T(∂V/∂T)P]dP=0. B: α=1/T for an ideal gas. C: the pressure drops (dP<0), so dT=μdP<0. D: false; above the inversion temperature (e.g. hydrogen and helium at room temperature) the gas warms.
  18. MCQExam level

    The ratio of the adiabatic compressibility κS to the isothermal compressibility κT of any substance is
    1. CP/CV
    2. 1
    3. γ−1
    4. CV/CP
    Answer and solution

    Answer: D

    A general result (Reech): κT/κS=CP/CV=γ. A substance is harder to compress when no heat can leave, so κS<κT. For an ideal gas: κT=1/P and κS=1/(γP).
  19. MCQExam level

    The Maxwell relation from the internal energy U(S,V) is
    1. (∂S∂V)T=(∂P∂T)V
    2. (∂T∂V)S=−(∂P∂S)V
    3. (∂T∂V)S=(∂P∂S)V
    4. (∂T∂P)S=−(∂V∂S)P
    Answer and solution

    Answer: B

    (∂U/∂S)V=T and (∂U/∂V)S=−P. Equal mixed derivatives give (∂T/∂V)S=−(∂P/∂S)V.
  20. MCQExam level

    The enthalpy is the Legendre transform of U(S,V) that replaces
    1. V by P, giving H=U−PV
    2. both S and V, giving H=U−TS+PV
    3. V by P, giving H=U+PV
    4. S by T, giving H=U−TS
    Answer and solution

    Answer: C

    The Legendre transform swapping V for its conjugate slope ∂U/∂V=−P is U−V(∂U/∂V)=U+PV=H. Replacing S by T gives F=U−TS; replacing both gives G.
  21. MSQExam level

    Which of these must hold for a thermodynamically stable homogeneous substance?
    1. CV>0
    2. κT>0
    3. CP≥CV
    4. Expansion coefficient α>0
    Answer and solution

    Answer: A, B, C

    Stability (entropy a maximum, or F and G minima) requires CV>0 and κT>0. Then CP−CV=TVα2/κT≥0. But α can be negative: water contracts on heating between 0 and 4∘C.
  22. MCQExam level

    The isothermal pressure derivative of enthalpy, (∂H/∂P)T, equals
    1. V−T(∂V∂T)P
    2. V+T(∂V∂T)P
    3. V
    4. T(∂V∂T)P
    Answer and solution

    Answer: A

    dH=TdS+VdP, so (∂H/∂P)T=T(∂S/∂P)T+V=V−T(∂V/∂T)P using the Gibbs Maxwell relation. It vanishes for an ideal gas.
  23. MCQExam level

    For a simple homogeneous one-component system, the grand potential Φ=U−TS−μN is equal to
    1. −PV
    2. +PV
    3. G
    4. zero
    Answer and solution

    Answer: A

    Euler's relation for an extensive U(S,V,N) gives U=TS−PV+μN. So Φ=U−TS−μN=−PV. (Likewise G=μN.)

    Why people get this wrong: Mixing up with G=U−TS+PV=μN.

  24. MSQExam level

    Which statements are correct?
    1. In a throttling process the enthalpy is unchanged.
    2. At fixed temperature and volume, a system in contact with a reservoir settles at the minimum of its Helmholtz energy.
    3. For a one-component system the chemical potential equals the Gibbs energy per particle.
    4. In a reversible isothermal process, ΔF equals the heat absorbed by the system.
    Answer and solution

    Answer: A, B, C

    A: steady flow with no heat gives H1=H2. B: at fixed T and V, dF≤0 for spontaneous changes. C: G=μN. D is false: at constant T, dF=dU−TdS=dU−dQrev=dWon; ΔF is the work done on the system, while the heat is TΔS.

    Why people get this wrong: Confusing "free energy" with heat; it measures the work available or required at constant temperature.

  25. NATExam level

    Mercury at 300 K has molar volume 1.48×10−5 m3 and volume expansion coefficient 1.81×10−4 K−1. Using (∂H/∂P)T=V(1−Tα), its molar enthalpy rises by ______ J/mol when the pressure is raised by 50 MPa at constant temperature (treat V and α as constant).
    Answer and solution

    Answer: 701 (±7)

    From dH=TdS+VdP and the Maxwell relation (∂S/∂P)T=−(∂V/∂T)P=−Vα: (∂H/∂P)T=V−TVα=V(1−Tα). Here 1−300×1.81×10−4=0.946, so ΔH=1.48×10−5×0.946×5×107=701 J/mol. The Tα term is the heat released during the compression; for a liquid it is a small correction.

    Why people get this wrong: Using ΔH=VΔP (740 J/mol) forgets that H also changes through TdS.

  26. MCQExam level

    A fundamental relation S(U,V,N) must be first-order homogeneous (doubling U, V and N doubles S). Which candidate fails this test? (A is a positive constant.)
    1. S=A(NVU)1/3
    2. S=A(NVU)1/2
    3. S=AU2/3V2/3N−1/3
    4. S=ANln⁡(UV/N2)
    Answer and solution

    Answer: B

    Scale everything by λ. (NVU)1/3→λ(NVU)1/3; U2/3V2/3N−1/3→λ2/3+2/3−1/3=λ; Nln⁡(UV/N2)→λNln⁡(UV/N2), since the ratio inside is unchanged. But (NVU)1/2→λ3/2(NVU)1/2: entropy would grow faster than the size of the system, so it is not extensive.

    Why people get this wrong: Count the total power of U, V and N together; it must equal one.

  27. MCQExam level

    A soap film has surface tension σ(T) that falls as the temperature rises, and dF=−SdT+σdA. When the film is stretched slowly at constant temperature, it
    1. gives out heat, since σ>0
    2. exchanges no heat; all the energy is work
    3. absorbs heat equal to σΔA
    4. absorbs heat, since (∂S/∂A)T=−dσ/dT>0
    Answer and solution

    Answer: D

    The Maxwell relation from dF is (∂S/∂A)T=−(∂σ/∂T)A. Because σ falls with temperature, this is positive: new surface has extra entropy, and at constant T the film must absorb heat TΔS=−T(dσ/dT)ΔA. The work σΔA is a separate input; together they make up the surface's internal energy.

    Why people get this wrong: σΔA is the work done on the film, not the heat.

  28. MCQHard

    A system has the fundamental relation U=AS3/(NV), with A a positive constant. Its equation of state relates P, V and U as
    1. PV=U/3
    2. PV=3U
    3. PV=23U
    4. PV=U
    Answer and solution

    Answer: D

    P=−(∂U/∂V)S,N=AS3/(NV2)=U/V. So PV=U. (Also T=(∂U/∂S)V=3AS2/(NV)=3U/S.)
  29. NATHard

    One mole of a solid at 300 K (molar volume 7.1×10−6 m3, α=5.0×10−5 K−1, treat V and α as constant) is compressed reversibly and isothermally from 0 to 1.0×108 Pa. The heat absorbed by the solid is ______ J (negative if heat is given out).
    Answer and solution

    Answer: -10.65 J (±0.1)

    Second TdS equation: TdS=CPdT−TVαdP. At constant T: Q=−TVαΔP=−300×7.1×10−6×5×10−5×108=−10.65 J. A solid that expands on heating gives out heat when squeezed.
  30. NATHard

    An ideal paramagnetic salt (its entropy depends only on B/T) is cooled to 1.0 K in a field of 2.0 T. The field is then lowered slowly and adiabatically to 0.05 T. Ignoring internal fields, the final temperature is ______ K.
    Answer and solution

    Answer: 0.025 K (±0.0005)

    Adiabatic and reversible means constant entropy, and S=f(B/T), so B/T stays fixed: Tf=TiBf/Bi=1.0×0.05/2.0=0.025 K. This is adiabatic demagnetisation; in a real salt internal fields stop the cooling near the ordering temperature.

← All topics · Timed mock test →