Home / Courses / IIT JAM Physics / Practice / Limits, Taylor series and approximations

Limits, Taylor series and approximations

Mathematical methods · 83 questions and templates for IIT JAM Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Calculus refresher: limits, Taylor series and approximations.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    The value of limx→0⁡sin⁡3xx is
    1. 0
    2. 1/3
    3. 3
    4. 1
    Answer and solution

    Answer: C

    Write sin⁡3xx=3⋅sin⁡3x3x. As x→0, 3x→0 too, and sin⁡u/u→1. So the limit is 3×1=3.

    Why people get this wrong: Answering 1 by quoting sin⁡x/x→1 without matching the argument of the sine to the denominator.

  2. NATWarm-up

    Using the first-order approximation 1+x≈1+x/2, the estimate of 1.02 is ______ (to three decimal places).
    Answer and solution

    Answer: 1.01 (±0.0005)

    Here x=0.02, so 1.02≈1+0.02/2=1.010. (The exact value is 1.00995; the next term, −x2/8=−0.00005, is the error.)

    Why people get this wrong: Using 1+2x (the rule for (1+x)2) instead of 1+x/2.

  3. MCQWarm-up

    In the Maclaurin series of cos⁡x, the coefficient of x4 is
    1. −1/24
    2. 1/24
    3. 1/12
    4. −1/2
    Answer and solution

    Answer: B

    cos⁡x=1−x22!+x44!−… The signs alternate starting with +1, so the x4 term has sign + and coefficient 1/4!=1/24.

    Why people get this wrong: Getting the sign wrong: in cos⁡x the x2 term is negative and the x4 term positive.

  4. MCQWarm-up

    For a particle with speed v≪c, the Lorentz factor γ=(1−v2/c2)−1/2 is approximately
    1. 1−v22c2
    2. 1+v2c2
    3. 1+v2c
    4. 1+v22c2
    Answer and solution

    Answer: D

    Use (1+u)n≈1+nu with u=−v2/c2 and n=−1/2: γ≈1+(−12)(−v2/c2)=1+v2/(2c2). It is bigger than 1, as γ always is.

    Why people get this wrong: Dropping one of the two minus signs gives 1−v2/2c2, which would make γ<1: impossible.

  5. MSQWarm-up

    Which of these functions are even, that is f(−x)=f(x) for every x?
    1. cos⁡x
    2. xsin⁡x
    3. x3+x
    4. e−x2
    Answer and solution

    Answer: A, B, D

    cos⁡(−x)=cos⁡x: even. (−x)sin⁡(−x)=(−x)(−sin⁡x)=xsin⁡x: even (odd times odd is even). (−x)3+(−x)=−(x3+x): odd. e−(−x)2=e−x2: even.

    Why people get this wrong: Thinking xsin⁡x is odd because it contains x and sin⁡x, both odd. Two odd factors make an even product.

  6. NATWarm-up

    The value of ∫0πsin⁡xdx is ______.
    Answer and solution

    Answer: 2

    An antiderivative of sin⁡x is −cos⁡x. So the integral is [−cos⁡x]0π=−cos⁡π+cos⁡0=1+1=2.

    Why people get this wrong: Writing +cos⁡x as the antiderivative gives −2; an area above the axis cannot be negative.

  7. MCQWarm-up

    The derivative of ln⁡(sin⁡x) (for 0<x<π) is
    1. 1sin⁡x
    2. tan⁡x
    3. cot⁡x
    4. −cot⁡x
    Answer and solution

    Answer: C

    Chain rule: ddxln⁡u=u′u with u=sin⁡x, so the derivative is cos⁡xsin⁡x=cot⁡x.

    Why people get this wrong: 1/sin⁡x forgets to multiply by the derivative of the inside.

  8. MCQStandard

    The value of limx→0⁡1−cos⁡xx2 is
    1. 0
    2. 1
    3. 2
    4. 1/2
    Answer and solution

    Answer: D

    Expand: 1−cos⁡x=1−(1−x2/2+x4/24−…)=x2/2−x4/24+… Divide by x2: 1/2−x2/24+⋯→1/2.

    Why people get this wrong: Stopping after one use of L'Hôpital gives sin⁡x/(2x), and then forgetting that this still tends to 1/2, not 0.

  9. NATStandard

    The value of limx→0⁡e2x−1−2xx2 is ______.
    Answer and solution

    Answer: 2

    e2x=1+2x+(2x)22!+(2x)33!+⋯=1+2x+2x2+43x3+… So the numerator is 2x2+43x3+…, and dividing by x2 gives 2+43x→2.

    Why people get this wrong: Writing (2x)2/2=x2 (forgetting to square the 2) gives the answer 1.

  10. MCQStandard

    The value of limx→0+⁡xln⁡x is
    1. −∞
    2. 0
    3. 1
    4. −1
    Answer and solution

    Answer: B

    It is a "0×(−∞)" form. Rewrite as ln⁡x1/x, an ∞/∞ form, and use L'Hôpital: 1/x−1/x2=−x→0. A power of x always beats a logarithm.

    Why people get this wrong: Choosing −∞ because ln⁡x→−∞, forgetting that the factor x goes to zero faster.

  11. MCQStandard

    The Maclaurin series x−x22+x33−… of ln⁡(1+x) converges exactly for
    1. all real x
    2. −1≤x<1
    3. −1<x≤1
    4. |x|<1 only, never at an end point
    Answer and solution

    Answer: C

    The ratio test gives radius 1. At x=1 the series is 1−12+13−…, an alternating series with terms falling to zero, which converges (to ln⁡2). At x=−1 it is −(1+12+13+…), the harmonic series, which diverges (as it must, since ln⁡0 is not finite). So −1<x≤1.

    Why people get this wrong: Mixing it up with −ln⁡(1−x)=x+x2/2+…, which converges on −1≤x<1.

  12. NATStandard

    For a pendulum of amplitude θ0 (in radians), the period is T≈T0(1+θ02/16), where T0 is the small-amplitude period. For θ0=0.2 rad, the period is longer than T0 by ______ % (to two decimal places).
    Answer and solution

    Answer: 0.25 % (±0.005)

    The fractional increase is θ02/16=0.04/16=0.0025, which is 0.25%.

    Why people get this wrong: Putting θ0 in degrees (11.5∘) into the formula gives a nonsense answer of over 800%.

  13. MCQStandard

    The field on the axis of a ring of charge Q and radius R, at distance z from its centre, is E=kQz(z2+R2)3/2. For z≫R it can be written E≈kQz2×F, where to first order F is
    1. 1+3R22z2
    2. 1−3R22z2
    3. 1−R2z2
    4. 1−3R2z2
    Answer and solution

    Answer: B

    Take z3 out of the bracket: (z2+R2)3/2=z3(1+R2/z2)3/2. So E=kQz2(1+R2/z2)−3/2≈kQz2(1−3R22z2). Far away the ring looks like a point charge, and the correction makes the field a little weaker.

    Why people get this wrong: Forgetting that the power is −3/2 after moving the bracket to the numerator gives a plus sign.

  14. MSQStandard

    For f(x)=|x|, which statements are true at x=0?
    1. f is continuous at 0.
    2. f is differentiable at 0.
    3. f has a local minimum at 0.
    4. The right derivative minus the left derivative equals 2.
    Answer and solution

    Answer: A, C, D

    Continuous: |x|→0=f(0) from both sides. The right derivative is +1 and the left derivative −1; they differ (by 2), so f is not differentiable at 0 (a corner). |x|≥0=f(0) everywhere, so 0 is a minimum.

    Why people get this wrong: Thinking "minimum means f′=0". At a corner the minimum exists although the derivative does not.

  15. NATStandard

    The derivative of f(x)=xx (for x>0) at x=1 is ______.
    Answer and solution

    Answer: 1

    Take logs: ln⁡f=xln⁡x. Differentiate: f′/f=ln⁡x+1, so f′=xx(ln⁡x+1). At x=1: 1×(0+1)=1.

    Why people get this wrong: Using the power rule x⋅xx−1 (treating the exponent as constant) or the exponential rule xxln⁡x (treating the base as constant); each gives only half of the answer.

  16. MCQStandard

    In statistical physics, the sum Z=∑n=0∞e−nβε (with βε>0) equals
    1. e−βε1−e−βε
    2. 11+e−βε
    3. 11−e−βε
    4. 1eβε+1
    Answer and solution

    Answer: C

    It is a geometric series 1+r+r2+… with ratio r=e−βε<1, so the sum is 1/(1−r)=1/(1−e−βε).

    Why people get this wrong: The first option is the sum starting at n=1 (it misses the n=0 term, which is 1). It equals 1/(eβε−1), the Bose-Einstein occupancy, which is a different quantity.

  17. NATStandard

    The value of ∫0∞x3e−xdx is ______.
    Answer and solution

    Answer: 6

    This is the gamma function Γ(4)=3!=6. (By parts three times: each step brings down the power, 3×2×1, and the boundary terms vanish at 0 and ∞.)

    Why people get this wrong: Confusing Γ(n) with n!: ∫0∞xne−xdx=n!=Γ(n+1), so here it is 3!, not 4!.

  18. MSQStandard

    Which of these Maclaurin series are correct (each for |x|<1 at least)?
    1. sinh⁡x=x+x33!+x55!+…
    2. cosh⁡x=1−x22!+x44!−…
    3. 11+x=1−x+x2−x3+…
    4. tan−1⁡x=x−x33+x55−…
    Answer and solution

    Answer: A, C, D

    sinh⁡x=(ex−e−x)/2 keeps the odd terms of ex, all positive: correct. cosh⁡x keeps the even terms, all positive: 1+x2/2!+x4/4!+…, so the second is wrong (that is cos⁡x). The geometric series with ratio −x gives the third. Integrating 1/(1+x2)=1−x2+x4−… term by term gives the fourth.

    Why people get this wrong: The hyperbolic functions have the same terms as sin⁡ and cos⁡ but with every sign positive.

  19. NATStandard

    The value of ∫−22(x5−3x3sin2⁡x+1)dx is ______.
    Answer and solution

    Answer: 4

    x5 is odd, and x3sin2⁡x is odd (odd times even), so both integrate to zero over the symmetric interval. Only the constant is left: ∫−221dx=4.

    Why people get this wrong: sin2⁡x is even, so it does not change the oddness of x3.

  20. NATStandard

    Air pressure falls with height as p=p0e−h/H with H=8 km. Using the first-order approximation e−u≈1−u, the pressure 100 m above the ground is lower than at the ground by about ______ %.
    Answer and solution

    Answer: 1.25 % (±0.01)

    u=h/H=0.1/8=0.0125, so p≈p0(1−0.0125): a drop of 1.25%. (The exact value 1−e−0.0125=1.242% differs only at second order, u2/2≈0.008%.)

    Why people get this wrong: Keep the units the same: 100 m is 0.1 km, not 100 km.

  21. MCQExam level

    The value of limx→0⁡sin⁡x−xx3 is
    1. −1/6
    2. 1/6
    3. 0
    4. −1/3
    Answer and solution

    Answer: A

    sin⁡x=x−x3/6+x5/120−…, so sin⁡x−x=−x3/6+… Dividing by x3 gives −1/6.

    Why people get this wrong: Dropping the sign: sin⁡x is slightly smaller than x for small positive x, so the limit must be negative.

  22. NATExam level

    The value of limx→0⁡tan⁡x−sin⁡xx3 is ______ (to two decimal places).
    Answer and solution

    Answer: 0.5 (±0.005)

    tan⁡x=x+x3/3+… and sin⁡x=x−x3/6+… The difference is x3(1/3+1/6)=x3/2, so the limit is 1/2=0.50.

    Why people get this wrong: Splitting into lim⁡tan⁡x/x3−lim⁡sin⁡x/x3: each part diverges, so the split is not allowed.

  23. MCQExam level

    The value of limx→∞⁡(1+3x)2x is
    1. e6
    2. e5
    3. e3/2
    4. 1
    Answer and solution

    Answer: A

    Take the log: 2xln⁡(1+3/x)≈2x⋅3x=6 for large x. So the limit is e6. (General rule: (1+a/x)bx→eab.)

    Why people get this wrong: "1∞=1" is wrong: this is an indeterminate form. Adding the numbers (e5) is the other common slip.

  24. NATExam level

    The value of ∫−∞∞e−2x2dx is ______ (to three decimal places).
    Answer and solution

    Answer: 1.253 (±0.002)

    The standard result is ∫−∞∞e−ax2dx=π/a. With a=2: π/2=1.5708=1.253.

    Why people get this wrong: Writing 2π (the result for e−x2/2) instead of π/2.

  25. MSQExam level

    Which of these infinite series converge?
    1. ∑n=1∞1n
    2. ∑n=1∞1n2
    3. ∑n=1∞(−1)n+1n
    4. ∑n=1∞n2n
    Answer and solution

    Answer: B, C, D

    A p-series ∑1/np converges only for p>1: 1/n (p=1/2) diverges and 1/n2 converges. The alternating harmonic series converges (terms shrink to zero with alternating signs), though not absolutely. For n/2n the ratio of successive terms tends to 1/2<1, so it converges (to 2).

    Why people get this wrong: Thinking "the terms go to zero, so the series converges". 1/n→0 but the sum diverges.

  26. NATExam level

    Gravity at height h above the Earth is g(h)=g/(1+h/R)2 with R=6400 km. Using the first-order (binomial) approximation, the height at which g has fallen by 1% is ______ km.
    Answer and solution

    Answer: 32 km (±0.5)

    For h≪R: (1+h/R)−2≈1−2h/R. A 1% drop means 2h/R=0.01, so h=0.005R=32 km. (The exact answer, R(1/0.99−1)=32.2 km, shows the approximation is excellent.)

    Why people get this wrong: Forgetting the factor 2 from the square gives 64 km.

  27. MCQExam level

    A model potential between two atoms is U(x)=U0[(a/x)12−2(a/x)6], with its minimum at x=a. Expanding U to second order about x=a, the effective spring constant U′′(a) is
    1. 36U0/a2
    2. 156U0/a2
    3. 12U0/a2
    4. 72U0/a2
    Answer and solution

    Answer: D

    U′=U0(−12a12x−13+12a6x−7), which is zero at x=a as expected. U′′=U0(156a12x−14−84a6x−8). At x=a: U′′=U0(156−84)/a2=72U0/a2. Near the minimum U≈−U0+12(72U0/a2)(x−a)2.

    Why people get this wrong: Taking only the repulsive term (156) or forgetting the factor 2 in front of the attractive term.

  28. NATExam level

    The approximation sin⁡x≈x−x3/6 is used at x=0.5 rad. The error (true value minus approximation) is ______ ×10−4 (to two decimal places).
    Answer and solution

    Answer: 2.59 (±0.03)

    The first term left out is x5/120=0.03125/120=2.60×10−4, and the next (−x7/5040≈−1.6×10−6) is tiny. Directly: sin⁡0.5=0.479426 and 0.5−0.020833=0.479167; the difference is 2.59×10−4. For an alternating series with shrinking terms, the error is smaller than the first neglected term and has its sign.

    Why people get this wrong: Taking the size of the last term kept (x3/6=0.0208) as the error.

  29. MCQExam level

    The value of limx→0⁡(1x2−1sin2⁡x) is
    1. 1/3
    2. 0
    3. −1/6
    4. −1/3
    Answer and solution

    Answer: D

    sin⁡x=x(1−x2/6+…), so sin2⁡x=x2(1−x2/3+…) and 1sin2⁡x=1x2(1+x2/3+…)=1x2+13+… The difference is −1/3+O(x2)→−1/3.

    Why people get this wrong: Squaring 1−x2/6 as 1−x2/36 (squaring each term) gives a wrong coefficient.

  30. NATExam level

    The relativistic kinetic energy (γ−1)mc2 expands as 12mv2+38mv4/c2+… For v=0.1c, the second term is ______ % of the first (to two decimal places).
    Answer and solution

    Answer: 0.75 % (±0.01)

    Ratio =38mv4/c212mv2=34v2c2=0.75×0.01=0.0075=0.75%. Even at a tenth of the speed of light the classical formula is good to better than 1%.

    Why people get this wrong: Using v/c=0.1 without squaring gives 7.5%.

← All topics · Timed mock test →