Home / Courses / IIT JAM Physics / Practice / Analytic functions and Cauchy's theorem

Analytic functions and Cauchy's theorem

Mathematical methods · 15 questions and templates for IIT JAM Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    Which of these functions of z=x+iy is analytic in the whole complex plane?
    1. |z|2
    2. z‾
    3. z2ez
    4. Rez
    Answer and solution

    Answer: C

    Products and compositions of entire functions are entire, and z2 and ez are both entire. The others depend on z‾: for z‾=x−iy, ux=1 but vy=−1, so Cauchy-Riemann fails everywhere. |z|2=zz‾ satisfies CR only at z=0, and Rez=(z+z‾)/2 nowhere.

    Why people get this wrong: A function that is real-valued and non-constant (like Rez or |z|2) can never be analytic on an open set.

  2. NATWarm-up

    f=u+iv is analytic with u=x2−y2+3x and v(0,0)=0. The value of v(1,1) is ______.
    Answer and solution

    Answer: 5

    Cauchy-Riemann: vy=ux=2x+3, so v=2xy+3y+g(x). Then vx=2y+g′(x) must equal −uy=2y, so g is a constant, zero by v(0,0)=0. v=2xy+3y and v(1,1)=5. (Indeed f=z2+3z.)

    Why people get this wrong: Forgetting the 3y from integrating the constant 3 in ux.

  3. MCQWarm-up

    The integral ∮|z|=1dzz, taken anticlockwise, equals
    1. 0
    2. 2πi
    3. πi
    4. 2π
    Answer and solution

    Answer: B

    On the circle z=eiθ, dz=ieiθdθ, so the integrand is idθ and the integral is ∫02πidθ=2πi. This single integral is the seed of the whole residue theorem.

    Why people get this wrong: Cauchy's theorem does not give 0 here: 1/z is not analytic at the origin inside the circle.

  4. MCQWarm-up

    The radius of convergence of ∑n=0∞zn2n is
    1. 1/2
    2. 1
    3. 2
    4. ∞
    Answer and solution

    Answer: C

    Ratio test: |an+1/an|=|z|/2<1 for |z|<2. Equivalently the sum is 1/(1−z/2), whose only singularity is at z=2, a distance 2 from the centre.

    Why people get this wrong: Reading the radius as the ratio of coefficients upside down gives 1/2.

  5. NATWarm-up

    The value of ∮|z|=3(z3+2z)dz, taken anticlockwise, is ______.
    Answer and solution

    Answer: 0

    A polynomial is entire, so by Cauchy's theorem its integral round any closed curve is 0. (Each power zn with n≥0 has the antiderivative zn+1/(n+1), which returns to its starting value.)

    Why people get this wrong: Only z−1 survives a closed loop; positive powers always give 0.

  6. MCQWarm-up

    The derivative of f(z)=z3 at z=i is
    1. 3i
    2. −3
    3. 3
    4. −3i
    Answer and solution

    Answer: B

    f is analytic everywhere with f′(z)=3z2, exactly as for real polynomials. At z=i: 3i2=−3.

    Why people get this wrong: i2=−1, so the factor i does not survive.

  7. MCQStandard

    The principal value of ii is
    1. eπ/2
    2. −1
    3. e−π/2
    4. i
    Answer and solution

    Answer: C

    ii=eiLogi with the principal logarithm Logi=ln⁡1+iπ2=iπ2. So ii=ei⋅iπ/2=e−π/2≈0.208, a real number. Other branches give e−π/2−2πk.

    Why people get this wrong: i⋅i=−1 in the exponent, so the result is e−π/2, not e+π/2.

  8. NATStandard

    The imaginary part of the principal logarithm Log(−1+i) is ______ (three decimal places).
    Answer and solution

    Answer: 2.356 (±0.002)

    Logz=ln⁡|z|+iArgz with −π<Argz≤π. The point −1+i lies in the second quadrant at 135∘, so Arg=3π/4≈2.356 (and the real part is ln⁡2).

    Why people get this wrong: tan−1⁡(1/(−1))=−π/4 puts the point in the wrong quadrant; add π.

  9. MCQExam level

    The product of all six sixth roots of unity (the roots of z6=1) is
    1. −1
    2. 1
    3. 0
    4. 6
    Answer and solution

    Answer: A

    The roots are those of z6−1, so their product is (−1)6×(constant term)=−1. Directly: the roots eiπk/3, k=0..5, multiply to eiπ(0+1+⋯+5)/3=e5πi=−1. (Their SUM is 0.)

    Why people get this wrong: Pairing each root with its conjugate seems to give 1, but z=−1 is its own conjugate.

  10. NATExam level

    The coefficient of z4 in the Taylor series of ez1−z about z=0 is ______ (three decimal places).
    Answer and solution

    Answer: 2.708 (±0.002)

    Multiply the series ez=∑zk/k! and 11−z=∑zm. The coefficient of z4 collects every k≤4 once: ∑k=041k!=1+1+12+16+124=6524≈2.708. (As n→∞ the coefficients tend to e; the series converges only for |z|<1.)

    Why people get this wrong: Taking only the k=4 term (1/24) forgets that the geometric series supplies every lower power.

  11. MSQExam level

    Let f(x+iy)=x2+iy2. Which statements are true?
    1. f is complex-differentiable at z=1+i
    2. f is analytic at z=1+i
    3. f is complex-differentiable at z=1+2i
    4. f′(1+i)=2
    Answer and solution

    Answer: A, D

    u=x2, v=y2. Cauchy-Riemann: ux=vy needs 2x=2y; uy=−vx is 0=0. The partials are continuous, so f is differentiable exactly on the line y=x: at 1+i yes, at 1+2i no. Analytic means differentiable on a whole neighbourhood, which a line never contains, so f is analytic nowhere. On the line, f′=ux+ivx=2x, which is 2 at 1+i.

    Why people get this wrong: Differentiable at a point is weaker than analytic there.

  12. MCQExam level

    The map w=ez sends the horizontal strip 0<Imz<π onto
    1. the right half-plane Rew>0
    2. the unit disc |w|<1
    3. the upper half-plane Imw>0
    4. the plane with the negative real axis removed
    Answer and solution

    Answer: C

    With z=x+iy, w=exeiy: |w|=ex takes every positive value and arg⁡w=y runs over (0,π). Every point with argument between 0 and π is the upper half-plane. (The strip −π<y<π would give the plane cut along the negative axis.)

    Why people get this wrong: Mapping only the left half of the strip (x<0) gives the upper half of the unit disc, not the whole disc.

← All topics · Timed mock test →