Home / Courses / IIT JAM Physics / Practice / Conductors, Laplace's equation and images

Conductors, Laplace's equation and images

Electricity and magnetism · 79 questions and templates for IIT JAM Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Conductors, Laplace's equation and images.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    A solid metal block of irregular shape carries a net charge and has reached electrostatic equilibrium. Inside the metal itself, the electric field is
    1. zero at every point
    2. equal to σ/ϵ0, where σ is the local surface charge density
    3. uniform but not zero
    4. largest near the sharpest corner
    Answer and solution

    Answer: A

    A conductor has free electrons. If any field existed inside the metal they would move, so in equilibrium (nothing moving) the field inside the material must be zero everywhere. The charge sits on the surface, arranged exactly so that its field cancels inside.

    Why people get this wrong: σ/ϵ0 is the field just outside the surface, not inside the metal. Sharp corners do have strong fields, but outside.

  2. NATWarm-up

    At a certain point on the surface of a charged conductor the surface charge density is 3.0μC/m2. The electric field just outside the surface at that point is ______ kV/m (to the nearest whole number).
    Answer and solution

    Answer: 339 kV/m (±3)

    Just outside a conductor the field is perpendicular to the surface with magnitude E=σ/ϵ0 (a tiny Gauss pillbox has flux only through its outer face). E=3.0×10−68.854×10−12=3.39×105 V/m =339 kV/m.

    Why people get this wrong: Using σ/(2ϵ0), the field of an isolated sheet. A conductor has no field on its inner side, so all the flux goes outwards and the field is twice as big.

  3. MCQWarm-up

    A neutral metal sphere has an empty cavity of irregular shape inside it. A positive point charge is brought near the outside of the sphere. The electric field inside the cavity
    1. points away from the outside charge
    2. is zero
    3. points towards the outside charge
    4. is the same as it would be without the metal
    Answer and solution

    Answer: B

    The cavity is a charge-free region whose whole boundary is the metal, which is one equipotential. The potential inside the cavity must satisfy Laplace's equation with a constant value on the boundary, so by uniqueness it is that constant everywhere inside, and E→=−∇V=0. This is the Faraday cage: outside charges cannot reach into an empty cavity.

    Why people get this wrong: Thinking the outside field leaks in. The induced surface charges on the outer surface cancel it everywhere inside, including the cavity.

  4. MSQWarm-up

    Which of these statements about an isolated charged conductor in electrostatic equilibrium are correct?
    1. Its whole surface is at one potential.
    2. Just outside, the field is perpendicular to the surface.
    3. Its surface charge density is the same everywhere on the surface, whatever its shape.
    4. Any net charge it carries lies on its surface.
    Answer and solution

    Answer: A, B, D

    With zero field inside, no work is needed to move a charge between any two points of the conductor, so it is one equipotential. A field component along the surface would push surface charges along it, so in equilibrium the field just outside is normal to the surface. Gauss's law with a surface just inside the metal (where E=0) shows no charge is enclosed, so the net charge is on the surface. The density is not uniform in general: it is larger where the surface curves sharply (points and edges).

    Why people get this wrong: Uniform σ holds only for an isolated sphere. On a pear-shaped conductor the charge crowds onto the pointed end.

  5. MCQWarm-up

    Laplace's equation ∇2V=0 holds
    1. everywhere, including inside charge distributions
    2. only inside conductors
    3. at every point where there is no charge
    4. only where the field is zero
    Answer and solution

    Answer: C

    Poisson's equation is ∇2V=−ρ/ϵ0. Where ρ=0 it becomes Laplace's equation. That includes the empty space around conductors and the inside of conductors (where V is constant), but those are special cases of "no charge here".

    Why people get this wrong: ∇2V=0 does not mean E=0: in the empty gap of a capacitor the field is large but ∇2V is zero.

  6. NATWarm-up

    A point charge of 2.0 nC is held 10 cm above a very large grounded metal plate. The magnitude of the force on it is ______ μN (to two decimal places).
    Answer and solution

    Answer: 0.9 $\mu$N (±0.01)

    Replace the plate by an image charge −q at 10 cm below the surface; above the plate the field is the same. The force is the Coulomb attraction between q and its image, distance 2d=0.20 m apart: F=kq2(2d)2=(8.99×109)(2.0×10−9)20.04=8.99×10−7 N ≈0.90μN, towards the plate.

    Why people get this wrong: Using d instead of 2d for the separation, which gives four times the right force.

  7. NATWarm-up

    The capacitance of an isolated metal sphere of radius 9.0 cm in air is ______ pF.
    Answer and solution

    Answer: 10 pF (±0.1)

    For an isolated sphere V=Q4πε0R, so C=4πε0R=0.0909×109=1.0×10−11 F =10 pF.

    Why people get this wrong: Using the radius in centimetres.

  8. MCQStandard

    A point charge q is at height d above an infinite grounded conducting plane. For the region above the plane, the plane can be replaced by
    1. a charge +q at depth d below the plane
    2. a charge −q at depth d/2 below the plane
    3. a charge −q/2 at depth d below the plane
    4. a charge −q at depth d below the plane
    Answer and solution

    Answer: D

    We need V=0 on the plane and the same charge q above it. A charge −q at the mirror point makes every point of the plane equidistant from q and −q, so V=kq/r−kq/r=0 there. By the uniqueness theorem this gives the correct potential everywhere above the plane (and only there: below the plane the real field is zero).

    Why people get this wrong: The image has the opposite sign; a +q image would make the plane a place of zero field, not zero potential.

  9. NATStandard

    A charge of +5 nC is held above an infinite grounded conducting plane. The total charge induced on the plane is ______ nC.
    Answer and solution

    Answer: -5 nC

    Integrate the induced density σ=−qd2π(r2+d2)3/2 over the plane: ∫0∞σ2πrdr=−qd[1d−0]=−q. Quicker: every field line from q ends on the plane (none escape to infinity in the upper half), so the plane holds exactly −q=−5 nC, whatever the height.

    Why people get this wrong: Answering −2.5 nC by thinking only half of the field lines reach the plane.

  10. MCQStandard

    A charge q is at height d above a grounded conducting plane. The induced surface charge density on the plane directly below the charge is
    1. −q4πd2
    2. −q2πd2
    3. −qπd2
    4. −q2πϵ0d2
    Answer and solution

    Answer: B

    Just above the plane, q and its image each give a field of magnitude kq/d2 at the foot point, both pointing down (towards the plane): E=2kq/d2=q2πϵ0d2 downward. At a conductor σ=ϵ0En with En the outward normal component: σ=−q2πd2.

    Why people get this wrong: Forgetting the image doubles the field (giving −q/4πd2), or leaving ϵ0 in: σ has units of C/m2, so ϵ0 cancels.

  11. NATStandard

    A charge of 1.0 nC is brought slowly from very far away to a point 5.0 cm above a large grounded metal plate. The work done by the external agent is ______ nJ (to one decimal place, with sign).
    Answer and solution

    Answer: -44.9 nJ (±0.5)

    The force on the charge at height z is the image attraction F=kq24z2 towards the plate, so the agent must hold it back with +kq2/4z2 (upward) while it moves down. The agent's force points up while the charge moves down, so the agent does negative work: W=−∫d∞kq24z2dz=−kq24d. Numbers: −(8.99×109)(10−18)0.20=−4.49×10−8 J =−44.9 nJ.

    Why people get this wrong: Using the energy of two real charges, −kq2/(2d). The image moves as the charge moves and only the upper half-space holds field energy, so the true work is half of that.

  12. MCQStandard

    In a region bounded by a closed surface, the electrostatic potential is fixed uniquely if we are given
    1. the charge density inside, and nothing about the boundary
    2. the field at one point inside
    3. the charge density inside and the potential on the whole boundary
    4. the total charge inside
    Answer and solution

    Answer: C

    This is the first uniqueness theorem: if two potentials V1,V2 obey the same Poisson equation inside and agree on the boundary, their difference obeys Laplace's equation and is zero on the boundary, so (having no maximum or minimum inside) it is zero everywhere. The second theorem replaces boundary values by the total charge on each conductor.

    Why people get this wrong: Total charge alone is not enough: the same charge can be arranged in endless ways giving different fields.

  13. MSQStandard

    Which of these functions could be the electrostatic potential in a charge-free region of the xy plane (no dependence on z)?
    1. x2−y2
    2. x2+y2
    3. xy
    4. excos⁡y
    Answer and solution

    Answer: A, C, D

    Check ∂2V/∂x2+∂2V/∂y2. x2−y2: 2−2=0. x2+y2: 2+2=4≠0 (it needs a uniform charge density). xy: 0+0=0. excos⁡y: excos⁡y−excos⁡y=0. So three of the four are harmonic.

    Why people get this wrong: x2+y2 looks the most "symmetric", but a bowl-shaped potential has a minimum, which Laplace's equation forbids.

  14. MCQStandard

    In a charge-free region, the potential at the centre of any sphere lying wholly in the region equals
    1. the average of the potential over the sphere's surface
    2. the largest value of the potential on the surface
    3. zero
    4. the potential at the point of the surface nearest to the nearest charge
    Answer and solution

    Answer: A

    This is the mean value property of solutions of Laplace's equation. It follows from the fact that a point charge q outside a sphere has an average potential over the sphere equal to kq/d, its value at the centre; superposition extends this to any outside charges. A consequence: V cannot have a maximum or minimum inside the region.

    Why people get this wrong: The mean is over the surface, not over the volume (though the volume average gives the same answer too).

  15. NATStandard

    A point charge of +6 nC is 30 cm from the centre of a grounded conducting sphere of radius 10 cm. The image charge that reproduces the field outside the sphere is ______ nC.
    Answer and solution

    Answer: -2 nC

    For a grounded sphere of radius R and an outside charge q at distance d from the centre, the image is q′=−qR/d, placed on the line to q at distance R2/d from the centre. Here q′=−6×10/30=−2 nC.

    Why people get this wrong: Using −q (the plane rule). A sphere only needs a smaller image, because it is smaller than the charge's distance.

  16. NATStandard

    For the grounded sphere of radius 10 cm with a point charge 30 cm from its centre, the image charge sits ______ cm from the centre of the sphere (to two decimal places).
    Answer and solution

    Answer: 3.33 cm (±0.02)

    The image lies inside the sphere on the line joining the centre to the charge, at b=R2/d=100/30=3.33 cm from the centre. Check: a surface point at angle θ is at distances r1 from q and r2 from q′ with r2/r1=R/d everywhere, so kq/r1+kq′/r2=0.

    Why people get this wrong: Putting the image at d/R or R/d (not even a length). The rule is R2/d, always inside the sphere.

  17. MCQStandard

    A charge q is placed at the centre of an uncharged, isolated, thick conducting spherical shell with inner radius a and outer radius b. For r>b the field is
    1. zero, because the shell screens the charge
    2. q4πϵ0r2⋅ab
    3. 2q4πϵ0r2
    4. q4πϵ0r2
    Answer and solution

    Answer: D

    Charge −q is induced on the inner surface (so the field in the metal is zero) and, since the shell is neutral, +q appears on the outer surface. A Gauss sphere with r>b encloses q−q+q=q, so E=kq/r2, as if the shell were absent.

    Why people get this wrong: A neutral isolated shell does not screen what is inside from the outside world; only grounding the shell removes the outer +q.

  18. NATStandard

    A thin metal shell of radius 5 cm carries +2 nC. It is surrounded by a concentric earthed metal shell of radius 10 cm. Taking 1/(4πε0)=9×109 SI units, the potential of the inner shell is ______ V.
    Answer and solution

    Answer: 180 V (±0.5)

    The outer shell is at V=0. Between the shells the field is that of the inner charge alone, E=kQ/r2, so the potential difference is kQ(1a−1b)=9×109×2×10−9×(20−10)=180 V. (The earthed shell carries −2 nC on its inner surface and nothing outside.)

    Why people get this wrong: Using kQ/a=360 V, the value for an isolated shell; the earthed outer shell lowers it.

  19. MCQStandard

    A positive charge is held near a neutral metal sphere on an insulating stand. The sphere is touched to earth for a moment, the earth link is removed, and then the positive charge is taken far away. The sphere is now
    1. neutral
    2. positively charged, uniformly over its surface
    3. negatively charged, uniformly over its surface
    4. negatively charged, with the charge on the side that faced the positive charge
    Answer and solution

    Answer: C

    While earthed, the sphere sits at V=0; the nearby positive charge would raise its potential, so electrons flow up from earth and the sphere gains negative charge. Breaking the link traps that charge. Once the outside charge is gone, nothing holds the charge to one side, so it spreads uniformly over the sphere.

    Why people get this wrong: Thinking earthing always leaves a conductor neutral; with a charge nearby it leaves it charged.

  20. MCQStandard

    A lightning rod is pointed rather than rounded. At the same potential, a sharp point sends charge into the air more easily than a smooth ball because
    1. the potential at the tip is higher than elsewhere on the rod
    2. the surface charge density, and so the field just outside, is largest where the surface curves most sharply
    3. the field inside the metal is not zero at the tip
    4. a point holds less total charge, so it repels the charge into the air
    Answer and solution

    Answer: B

    The whole conductor is one equipotential. For two joined spheres of radii r1, r2 at the same potential, qr is the same for each, so σ∝1r: the smaller the radius of curvature, the larger σ and the field E=σ/ε0. At a sharp tip the field can exceed the breakdown field of air and ionise it (corona discharge).

    Why people get this wrong: Saying the tip is at a higher potential; the potential is the same everywhere on the conductor, only the field differs.

  21. NATExam level

    Two grounded conducting half-planes meet along a line at an angle of 60∘, and a point charge is placed between them. The number of image charges needed to find the field in the wedge is ______.
    Answer and solution

    Answer: 5

    Reflecting repeatedly in the two planes generates charges at the corners of a pattern with 360∘/60∘=6 sectors, one charge per sector. One of these is the real charge, so 6−1=5 images, with alternating signs round the circle. The method closes exactly only when 360∘/θ is an even integer, as it is here.

    Why people get this wrong: Answering 6 (counting the real charge) or 3 (reflections in each plane only once each plus their combination, which is the right count only for 90∘).

  22. MCQExam level

    Two grounded conducting planes, x=0 and y=0, form a right-angled corner. A charge q is at (a,a,0). The force on it has magnitude (k=1/4πϵ0)
    1. (22−1)kq28a2, towards the corner
    2. (22+1)kq28a2, towards the corner
    3. kq24a2, towards the corner
    4. 2kq24a2, away from the corner
    Answer and solution

    Answer: A

    Images: −q at (−a,a), −q at (a,−a), +q at (−a,−a). The first pulls along −x with kq2/4a2; the second along −y with kq2/4a2; together 2kq2/4a2 towards the corner. The third is 22a away and repels with kq2/8a2 along the diagonal, away from the corner. Net: 2kq24a2−kq28a2=(22−1)kq28a2 towards the corner.

    Why people get this wrong: Giving the positive image the wrong sign (adding instead of subtracting), or forgetting it altogether.

  23. MSQExam level

    An uncharged conducting sphere of radius R is placed in a uniform field E0zˆ. Which statements are correct? (θ is measured from the +z axis.)
    1. The induced surface charge density is 3ϵ0E0cos⁡θ.
    2. Outside, the sphere's own contribution is the field of a dipole of moment 4πϵ0R3E0.
    3. The field inside the sphere is zero.
    4. The sphere acquires a net induced charge.
    Answer and solution

    Answer: A, B, C

    Solving Laplace's equation with V=0 on the sphere and V→−E0rcos⁡θ far away gives V=−E0(r−R3r2)cos⁡θ. The second term is a dipole potential pcos⁡θ4πϵ0r2 with p=4πϵ0R3E0. Then σ=−ϵ0∂V/∂r|R=ϵ0E0(1+2)cos⁡θ=3ϵ0E0cos⁡θ. Integrating cos⁡θ over the sphere gives zero, so no net charge: it only separates. The inside is metal, so E=0 there.

    Why people get this wrong: Taking σ=ϵ0E0cos⁡θ, as if the sphere did not disturb the field. Its induced dipole adds 2E0 at the poles, so the normal field there is 3E0.

  24. NATExam level

    A neutral metal ball is placed in a uniform field of 1.0 kV/m. The largest surface charge density induced on it is ______ nC/m2 (to one decimal place).
    Answer and solution

    Answer: 26.6 nC/m$^2$ (±0.3)

    For a conducting sphere in a uniform field, σ=3ϵ0E0cos⁡θ, largest at the poles: σmax⁡=3(8.854×10−12)(1000)=2.66×10−8 C/m2 =26.6 nC/m2. Notice it does not depend on the radius.

    Why people get this wrong: Using ϵ0E0, which ignores how the ball bends the field lines towards itself (the field at the poles is 3E0).

  25. MCQExam level

    A neutral conducting sphere sits in a uniform field E0. Just outside its surface, at the two points where the surface faces straight along the field, the field strength is
    1. E0
    2. 2E0
    3. 3E0
    4. E0/3
    Answer and solution

    Answer: C

    Just outside, E=σ/ϵ0=3E0cos⁡θ, which is 3E0 at the poles (θ=0,π) and zero at the equator. The sphere gathers field lines towards its poles. This is why lightning rods and small dust grains see enhanced fields.

    Why people get this wrong: 2E0 comes from adding only the dipole's pole field once (2p/4πϵ0R3=2E0) and forgetting the applied E0.

  26. MCQExam level

    A long slot has grounded walls at y=0 and y=a; the end at x=0 is held at a fixed potential and the slot runs to x→∞. Far from the end, the potential dies away like e−x/ℓ with ℓ equal to
    1. a
    2. a/π
    3. πa
    4. a/2
    Answer and solution

    Answer: B

    Separating variables, V=∑nCne−nπx/asin⁡(nπy/a); the sine must vanish at y=0 and y=a, which forces k=nπ/a, and Laplace's equation then requires the x part to grow or decay at the same rate k. Far away only the slowest term n=1 survives, decaying with length a/π.

    Why people get this wrong: Guessing the decay length is the slot width a. The potential actually dies away about three times faster.

  27. NATExam level

    For the same slot (grounded walls at y=0 and y=a, end x=0 held at V0=100 V), the solution is V=∑n odd4V0nπe−nπx/asin⁡nπya. The potential at x=a, y=a/2 is ______ V (to two decimal places).
    Answer and solution

    Answer: 5.5 V (±0.03)

    At x=a the nth term carries e−nπ, so the series converges very fast. n=1: 400πe−πsin⁡π2=127.32×0.04321=5.502 V. n=3: 4003πe−3πsin⁡3π2=−0.0034 V. Total ≈5.50 V.

    Why people get this wrong: Expecting something like 50 V. One slot width from the end, only about 5% of the end potential is left.

  28. MSQExam level

    A point charge q is at distance d from the centre of a conducting sphere of radius R<d. Which statements are correct?
    1. If the sphere is grounded, the charge induced on it is −qR/d.
    2. If the sphere is grounded, the force on q is attractive at every distance.
    3. If the sphere is isolated and neutral, its field outside is given by the grounded-sphere image plus a charge +qR/d at the centre.
    4. If the sphere is isolated and neutral, the force on q is zero because the sphere carries no net charge.
    Answer and solution

    Answer: A, B, C

    For a grounded sphere the image −qR/d at R2/d makes the surface V=0; Gauss's law shows the sphere holds exactly the image charge, and q is pulled towards it. To make it isolated and neutral, add +qR/d at the centre: this keeps the surface an equipotential and brings the total to zero. The force is still attractive, because the negative image is nearer to q than the positive one.

    Why people get this wrong: A neutral conductor still attracts a charge, as a charged comb attracts paper: induced charges of opposite sign sit nearer.

  29. MCQExam level

    A neutral metal sphere (outer surface spherical) has a small off-centre cavity containing a point charge q. The charge on the outer surface of the sphere is
    1. +q, crowded on the side nearer the cavity
    2. zero, because the metal screens the cavity
    3. +q, spread non-uniformly in a way that depends on the cavity's shape
    4. +q, spread uniformly over the outer surface
    Answer and solution

    Answer: D

    The inner surface carries −q, arranged to cancel the field of q everywhere in the metal. The outer surface then holds +q. The metal screens the outer surface from whatever happens inside, so the outer charge arranges itself as it would on an isolated sphere with charge q: uniformly. Outside, the field is kq/r2 from the sphere's centre, not from the charge.

    Why people get this wrong: Expecting the outside to "know" where the charge is. It cannot: the field in the metal is zero, so nothing about the cavity reaches the outer surface except the total charge.

  30. NATExam level

    Air breaks down when the field reaches about 3.0×106 V/m. The highest potential to which an isolated metal sphere of radius 5.0 cm can be charged in air is about ______ kV.
    Answer and solution

    Answer: 150 kV (±1)

    For a sphere, Esurface=kQ/R2 and V=kQ/R, so V=EsurfaceR. The largest field allowed is 3.0×106 V/m: Vmax⁡=(3.0×106)(0.050)=1.5×105 V =150 kV. Bigger spheres hold higher potentials, which is why Van de Graaff domes are large and smooth.

    Why people get this wrong: Dividing by R instead of multiplying. Small, sharp objects reach breakdown at low voltage, not high.

← All topics · Timed mock test →