Home / Courses / IIT JAM Physics / Practice / Differential equations

Differential equations

Mathematical methods · 82 questions and templates for IIT JAM Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: First and second order differential equations.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    The order and degree of (d2ydx2)3+(dydx)4+y=0 are
    1. order 2, degree 3
    2. order 2, degree 4
    3. order 3, degree 2
    4. order 4, degree 2
    Answer and solution

    Answer: A

    The order is the highest derivative present: the second. The degree is the power of that highest derivative (once the equation is polynomial in derivatives): 3. The power 4 belongs to a lower derivative and does not count.

    Why people get this wrong: Picking the largest power anywhere (4) instead of the power of the highest derivative.

  2. NATWarm-up

    If dydx=−2y and y(0)=3, then y(0.5) is ______ (to two decimal places).
    Answer and solution

    Answer: 1.1 (±0.01)

    Separate: dy/y=−2dx, so ln⁡y=−2x+c and y=3e−2x. At x=0.5: 3e−1≈1.10.
  3. MCQWarm-up

    Which of these differential equations is linear in y?
    1. yy′+x=0
    2. y′′+sin⁡y=0
    3. y′′+x2y=sin⁡x
    4. (y′)2+y=x
    Answer and solution

    Answer: C

    Linear means y and its derivatives appear only to the first power, not multiplied together and not inside functions. C qualifies: the coefficient x2 and the right side sin⁡x may depend on x freely. A has yy′, B has sin⁡y (the full pendulum), D has (y′)2.

    Why people get this wrong: x2 and sin⁡x look non-linear, but linearity is about y, not x.

  4. MCQWarm-up

    The general solution of y′′+4y=0 is
    1. Ae2x+Be−2x
    2. Acos⁡4x+Bsin⁡4x
    3. (A+Bx)e2x
    4. Acos⁡2x+Bsin⁡2x
    Answer and solution

    Answer: D

    Try y=emx: m2+4=0, m=±2i. Purely imaginary roots give oscillation: y=Acos⁡2x+Bsin⁡2x (simple harmonic motion with ω=2).

    Why people get this wrong: Option B uses ω=4; the frequency is the square root of 4.

  5. NATWarm-up

    For y′′−5y′+6y=0, solutions of the form y=emx exist for two values of m. The larger value is ______.
    Answer and solution

    Answer: 3

    Substituting gives the auxiliary equation m2−5m+6=0=(m−2)(m−3). So m=2 or 3; the general solution is Ae2x+Be3x.
  6. MSQWarm-up

    Which functions are solutions of y′′−y=0?
    1. ex
    2. e−x
    3. cosh⁡x
    4. sin⁡x
    Answer and solution

    Answer: A, B, C

    The auxiliary equation m2−1=0 gives e±x, and any combination works, including cosh⁡x=12(ex+e−x). For sin⁡x, y′′−y=−2sin⁡x≠0.
  7. MCQWarm-up

    Two different functions y1 and y2 both satisfy y′′+y=x. Their difference y1−y2 satisfies
    1. y′′+y=x
    2. y′′+y=2x
    3. y′′+y=0
    4. no particular equation
    Answer and solution

    Answer: C

    Subtract the two equations: (y1−y2)′′+(y1−y2)=x−x=0. This works because the left side is linear. It is why the general solution is one particular solution plus the general solution of the homogeneous equation.

    Why people get this wrong: The sum y1+y2 would satisfy the equation with 2x; the difference cancels the forcing.

  8. NATStandard

    Solve y′+yx=x2 for x>0 with y(1)=1. The value of y(2) is ______ (to three decimal places).
    Answer and solution

    Answer: 2.375 (±0.005)

    Integrating factor e∫dx/x=x. Then (xy)′=x3, so xy=x44+C. From y(1)=1: C=34. At x=2: 2y=4+34, y=2.375.

    Why people get this wrong: Forgetting to multiply the right side by the integrating factor: (xy)′=x⋅x2, not x2.

  9. MCQStandard

    The solution of (2xy+3)dx+(x2+4y)dy=0 is
    1. x2y+2y2=C
    2. x2y+3x+2y2=C
    3. 2xy+3x+4y=C
    4. x2y+3x+4y2=C
    Answer and solution

    Answer: B

    ∂y(2xy+3)=2x=∂x(x2+4y), so it is exact: dϕ=0 with ϕx=2xy+3, ϕy=x2+4y. Integrating: ϕ=x2y+3x+2y2. Check: ϕy=x2+4y ✓.

    Why people get this wrong: Option A drops the 3x term; D integrates 4y wrongly.

  10. NATStandard

    A quantity decays as dNdt=−λN with λ=0.1 s−1. Its half-life is ______ s (to two decimal places).
    Answer and solution

    Answer: 6.93 s (±0.01)

    N=N0e−λt. Half remains when e−λt=12: t1/2=ln⁡2/λ=0.693/0.1=6.93 s.

    Why people get this wrong: 1/λ=10 s is the mean life, not the half-life.

  11. MCQStandard

    The general solution of y′′+2y′+y=0 is
    1. Ae−x+Be−x
    2. (A+Bx)e−x
    3. Aex+Bxex
    4. e−x(Acos⁡x+Bsin⁡x)
    Answer and solution

    Answer: B

    m2+2m+1=(m+1)2: a double root m=−1. The second solution is x times the first: y=(A+Bx)e−x.

    Why people get this wrong: Option A is really one constant (A+B) times one function, so it cannot fit two initial conditions.

  12. NATStandard

    The oscillator x¨+bx˙+9x=0 is critically damped when b= ______.
    Answer and solution

    Answer: 6

    Roots m=12(−b±b2−36). Critical damping is the double root: b2=36, b=6 (that is 2ω0 with ω0=3).

    Why people get this wrong: Answering 3 (ω0) instead of 2ω0.

  13. MCQStandard

    The Wronskian W=y1y2′−y2y1′ of y1=ex and y2=e2x is
    1. e3x
    2. 0
    3. 3e3x
    4. −e3x
    Answer and solution

    Answer: A

    W=ex⋅2e2x−e2x⋅ex=e3x. It is never zero, so the two solutions are independent.
  14. NATStandard

    A cup of tea cools from 100∘C to 60∘C in 10 minutes in a room at 20∘C (Newton's law: T˙=−k(T−20)). After 20 minutes in total, its temperature is ______ ∘C.
    Answer and solution

    Answer: 40 °C (±0.1)

    T−20=80e−kt. After 10 min: 40=80e−10k, so e−10k=12. After 20 min: 80×14=20 above room temperature, so 40∘C.

    Why people get this wrong: Assuming a steady fall of 40∘ per 10 minutes, which would give 20∘C. It is the excess over the room that halves.

  15. MCQStandard

    The solution of dydx=xy with y(0)=1 is
    1. y=ex2
    2. y=1+x22
    3. y=ex2/2
    4. y=ex
    Answer and solution

    Answer: C

    Separate: ∫dy/y=∫xdx, so ln⁡y=x22+c; y(0)=1 gives c=0, so y=ex2/2. Check: y′=xex2/2=xy ✓.
  16. MSQStandard

    Which of these (complex-valued solutions allowed) satisfy y′′+9y=0?
    1. sin⁡3x
    2. cos⁡3x+2sin⁡3x
    3. e3ix
    4. cos⁡9x
    Answer and solution

    Answer: A, B, C

    The roots are m=±3i, so e±3ix and every combination, such as sin⁡3x and cos⁡3x+2sin⁡3x, are solutions. cos⁡9x gives y′′+9y=(−81+9)cos⁡9x≠0.
  17. NATStandard

    For dydx=y2 with y(0)=1, the value of y(0.5) is ______.
    Answer and solution

    Answer: 2 (±0.01)

    Separate: ∫y−2dy=∫dx, so −1y=x+c; y(0)=1 gives c=−1, so y=11−x. At x=0.5, y=2. (The solution blows up at x=1: non-linear equations can do that.)
  18. MCQStandard

    For dydt=y2−4, the constant (equilibrium) solutions and their stability are
    1. y=2 stable and y=−2 unstable
    2. only y=0, stable
    3. y=±2, both stable
    4. y=−2 stable and y=2 unstable
    Answer and solution

    Answer: D

    Equilibria are where y2−4=0: y=±2. Just above y=2 the slope is positive, so y runs away upward; just below, it is negative, so y runs away downward: unstable. Near y=−2: for −2<y<2 the slope is negative (falls towards −2), for y<−2 it is positive (rises towards −2): stable. Test: f′(y)=2y is negative at −2 (stable) and positive at 2 (unstable).

    Why people get this wrong: Stability is decided by the sign of f′(y∗), not by the sign of y∗ alone.

  19. NATStandard

    A 12 V battery is switched on at t=0 across a 4 Ω resistor in series with a 2 H inductor, so Ldidt+Ri=V with i(0)=0. The current at t=0.5 s is ______ A (to two decimal places).
    Answer and solution

    Answer: 1.9 A (±0.01)

    The solution is i(t)=VR(1−e−t/τ) with τ=L/R=0.5 s. At t=τ: i=3×(1−e−1)=3×0.632=1.90 A.

    Why people get this wrong: The time constant of an RL circuit is L/R, not LR (that would be 8 s).

  20. NATExam level

    A particular solution of y′′+y=3e2x is Ae2x. The value of A is ______ (to one decimal place).
    Answer and solution

    Answer: 0.6 (±0.01)

    Substitute y=Ae2x: 4Ae2x+Ae2x=3e2x, so 5A=3, A=0.6.
  21. MCQExam level

    A particular solution of y′′+4y=sin⁡2x is
    1. −14xcos⁡2x
    2. 14sin⁡2x
    3. −12xcos⁡2x
    4. 14xsin⁡2x
    Answer and solution

    Answer: A

    The forcing frequency equals the natural one, so Asin⁡2x fails (it solves the homogeneous equation). Try y=Bxcos⁡2x: y′′=−4Bsin⁡2x−4Bxcos⁡2x, so y′′+4y=−4Bsin⁡2x. Set −4B=1: B=−14. The amplitude grows with x: resonance.

    Why people get this wrong: Option B gives y′′+4y=0, not sin⁡2x.

  22. NATExam level

    The solutions of x¨+2x˙+10x=0 oscillate with angular frequency ______ rad/s.
    Answer and solution

    Answer: 3 rad/s

    m2+2m+10=0 gives m=−1±3i. So x=e−t(Acos⁡3t+Bsin⁡3t): angular frequency 3 rad/s, decay rate 1 s−1.

    Why people get this wrong: 10≈3.16 is the undamped frequency; damping lowers it to ω02−γ2.

  23. MCQExam level

    The general solution of x2y′′−2xy′+2y=0 (x>0) is
    1. Aex+Be2x
    2. Ax+Bx2
    3. Ax−1+Bx−2
    4. (A+Bln⁡x)x
    Answer and solution

    Answer: B

    For an Euler-Cauchy equation try y=xm: m(m−1)−2m+2=m2−3m+2=0, so m=1,2. Hence y=Ax+Bx2. Check y=x2: 2x2−4x2+2x2=0 ✓.

    Why people get this wrong: Option A treats it as constant-coefficient, but the coefficients x2 and x change the trial function to a power.

  24. NATExam level

    A capacitor charges through a resistor with time constant RC=2 ms. The time for its charge to reach 90% of the final value is ______ ms (to two decimal places).
    Answer and solution

    Answer: 4.61 ms (±0.01)

    Rq˙+q/C=V gives q=CV(1−e−t/RC). 90% means e−t/RC=0.1, so t=RCln⁡10=2×2.303=4.61 ms.

    Why people get this wrong: RCln⁡0.9 is the time for the remaining gap to fall by 10%, which is the wrong way round.

  25. MSQExam level

    For y′′+py′+qy=0 with constants p>0 and q>0, which are true?
    1. Every solution tends to 0 as x→∞.
    2. Solutions oscillate if p2<4q.
    3. If p2>4q, no solution oscillates.
    4. If p2≥4q, a solution can cross zero infinitely many times.
    Answer and solution

    Answer: A, B, C

    Roots m=12(−p±p2−4q). With p,q>0 both roots have negative real part (A). p2<4q: complex roots, decaying oscillation (B). p2>4q: two negative real roots, an overdamped decay (C). With real roots a solution Aem1x+Bem2x (or (A+Bx)emx) crosses zero at most once, so D is false.
  26. NATExam level

    The steady-state amplitude of x¨+2x˙+25x=10cos⁡5t is ______.
    Answer and solution

    Answer: 1 (±0.01)

    For x¨+2βx˙+ω02x=Fcos⁡ωt the steady amplitude is F(ω02−ω2)2+(2βω)2. Here ω02=ω2=25 and 2βω=2×5=10, so the amplitude is 10/10=1. Damping keeps it finite at resonance.

    Why people get this wrong: Without damping the formula blows up; with it, the amplitude at resonance is F/(2βω0).

  27. MCQExam level

    The general solution of y′=yx+1 for x>0 is
    1. y=xln⁡x+Cx
    2. y=x+C
    3. y=Cx−1
    4. y=ln⁡x+Cx
    Answer and solution

    Answer: A

    Write it as y′−y/x=1; integrating factor e−ln⁡x=1/x. Then (y/x)′=1/x, so y/x=ln⁡x+C and y=xln⁡x+Cx. Check: y′=ln⁡x+1+C=y/x+1 ✓.
  28. NATExam level

    Solve y′′−3y′+2y=0 with y(0)=0, y′(0)=1. The value of y(ln⁡2) is ______.
    Answer and solution

    Answer: 2

    Roots 1 and 2: y=Aex+Be2x. A+B=0 and A+2B=1 give B=1, A=−1: y=e2x−ex. At x=ln⁡2: 4−2=2.
  29. MCQExam level

    An integrating factor for y′+(tan⁡x)y=cos⁡x is
    1. cos⁡x
    2. etan⁡x
    3. sec⁡x
    4. ln⁡sec⁡x
    Answer and solution

    Answer: C

    e∫tan⁡xdx=eln⁡sec⁡x=sec⁡x. Then (ysec⁡x)′=1 and y=(x+C)cos⁡x.

    Why people get this wrong: etan⁡x forgets to integrate tan⁡x first.

  30. NATExam level

    A body falls from rest with linear drag: mv˙=mg−bv, with m/b=3 s. The time for it to reach half its terminal speed is ______ s (to two decimal places).
    Answer and solution

    Answer: 2.08 s (±0.01)

    v=vt(1−e−bt/m) with vt=mg/b. Half the terminal speed: e−t/3=12, so t=3ln⁡2≈2.08 s.

← All topics · Timed mock test →