Home / Courses / IIT JAM Physics / Practice / Measurement, errors and fitting data

Measurement, errors and fitting data

Experimental methods · 15 questions and templates for IIT JAM Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    Which of these reduces the random error of a result but leaves a systematic error untouched?
    1. Calibrating the instrument against a standard
    2. Correcting for the zero error of the scale
    3. Averaging a larger number of repeated readings
    4. Measuring the same quantity by a different method
    Answer and solution

    Answer: C

    The standard error of a mean falls as σ/N, so more readings reduce random scatter. A systematic error shifts every reading the same way, so it survives any amount of averaging; calibration, zero correction and an independent method are the ways to find and remove it.

    Why people get this wrong: Averaging never removes a bias.

  2. NATWarm-up

    Five readings of a length are 9.8, 10.1, 10.0, 10.3 and 9.8 cm. The standard error of their mean (using the sample standard deviation) is ______ cm (to three decimal places).
    Answer and solution

    Answer: 0.095 cm (±0.002)

    Mean =50.0/5=10.0 cm. Deviations: −0.2,0.1,0,0.3,−0.2; squares sum to 0.18. Sample standard deviation s=0.18/4=0.212 cm. Standard error s/5=0.212/2.236=0.095 cm.

    Why people get this wrong: The standard deviation (0.21 cm) describes one reading; the standard error describes the mean.

  3. MCQWarm-up

    For Gaussian errors, the fraction of readings expected within ±2σ of the mean is about
    1. 68.3%
    2. 90.0%
    3. 99.7%
    4. 95.4%
    Answer and solution

    Answer: D

    The probability within ±kσ is erf⁡(k/2): 68.3% for k=1, 95.4% for k=2, 99.7% for k=3.

    Why people get this wrong: 68% is one sigma; 99.7% is three.

  4. MCQWarm-up

    How many significant figures does the reading 0.004050 m have?
    1. 3
    2. 4
    3. 6
    4. 7
    Answer and solution

    Answer: B

    Leading zeros only place the decimal point, so they are not significant. The digits 4, 0, 5 and the final 0 are: the zero between 4 and 5 is enclosed, and a trailing zero after the decimal point records that the reading was made to that place. So 4 significant figures (4.050×10−3 m).

    Why people get this wrong: Dropping the final zero treats a measured digit as decoration.

  5. NATStandard

    A quantity f=x2y is formed from independent measurements with relative uncertainties 1% in x and 2% in y. The relative uncertainty of f is ______ % (to two decimal places).
    Answer and solution

    Answer: 2.83 % (±0.02)

    For products of powers, relative uncertainties add in quadrature, each multiplied by its power: σf/f=(2×1%)2+(1×2%)2=8%=2.83%.

    Why people get this wrong: Adding linearly (4%) is the worst case, not the standard uncertainty for independent errors.

  6. MCQStandard

    The current in a discharging circuit is expected to follow I=I0e−t/τ. Which plot is a straight line, and what does its slope give?
    1. ln⁡I against t; slope −1/τ
    2. I against ln⁡t; slope −τ
    3. ln⁡I against ln⁡t; slope −1/τ
    4. 1/I against t; slope τ
    Answer and solution

    Answer: A

    Taking logs, ln⁡I=ln⁡I0−t/τ: linear in t with slope −1/τ and intercept ln⁡I0.

    Why people get this wrong: A log-log plot linearises power laws, not exponentials.

  7. MCQStandard

    Data are suspected to follow y=Cxn with unknown C and n. A straight-line fit of which quantities gives n directly as the slope?
    1. y against x2
    2. ln⁡y against x
    3. ln⁡y against ln⁡x
    4. 1/y against 1/x
    Answer and solution

    Answer: C

    ln⁡y=ln⁡C+nln⁡x: slope n, intercept ln⁡C. Any base of logarithm works for the slope.

    Why people get this wrong: ln⁡y against x is for exponentials.

  8. MCQStandard

    A calculation gives g=9.8164 m s−2 with a standard uncertainty of 0.0372 m s−2. The correct way to report it is
    1. 9.8164±0.0372 m s−2
    2. 9.82±0.04 m s−2
    3. 9.8±0.0372 m s−2
    4. 9.816±0.04 m s−2
    Answer and solution

    Answer: B

    Round the uncertainty to one (or two) significant figures, here 0.04, then round the value to the same decimal place: 9.82. The digits beyond are not known.

    Why people get this wrong: The value and its uncertainty must end at the same decimal place.

  9. NATStandard

    A resistance is found from V=12.0±0.1 V and I=2.00±0.02 A (independent errors) as R=V/I. The standard uncertainty of R is ______ Ω (to three decimal places).
    Answer and solution

    Answer: 0.078 (±0.001)

    R=6.00 Ω. For a quotient the relative errors add in quadrature: (0.1/12.0)2+(0.02/2.00)2=6.94×10−5+1.00×10−4=0.0130. So σR=0.0130×6.00=0.078 Ω.

    Why people get this wrong: Adding the relative errors linearly (1.83%) gives 0.11 Ω, the worst case, not the standard uncertainty.

  10. MCQStandard

    A quantity is measured as x=200±10. The value of ln⁡x with its standard uncertainty is
    1. 5.30±2.30
    2. 5.30±10
    3. 5.30±0.69
    4. 5.30±0.05
    Answer and solution

    Answer: D

    ln⁡200=5.30 and d(ln⁡x)/dx=1/x, so σln⁡x=σx/x=10/200=0.05. The absolute error of a logarithm equals the relative error of its argument, which is why log plots show equal relative errors as equal bars.

    Why people get this wrong: Taking the logarithm of the error (ln⁡10=2.30) is not error propagation.

  11. NATExam level

    A source gives about 50 counts per second, with negligible background. To measure its rate to a relative standard uncertainty of 1%, it must be counted for ______ s.
    Answer and solution

    Answer: 200 (±1)

    For N Poisson counts the relative uncertainty is 1/N. 1/N=0.01 needs N=104 counts, which at 50 s−1 takes 200 s. Halving the uncertainty would take four times as long.

    Why people get this wrong: Taking N=100 (as if the relative error were 1/N) gives only 2 s.

  12. NATHard

    g is found from a free fall of height h=1.000±0.001 m taking t=0.4515±0.0010 s, with g=2h/t2 (independent errors). The standard uncertainty of g is ______ m s−2 (to three decimal places).
    Answer and solution

    Answer: 0.045 (±0.001)

    g=2×1.000/0.45152=9.811 m s−2. Relative errors: h gives 0.001; t−2 gives 2×0.0010/0.4515=0.00443. In quadrature: 0.0012+0.004432=0.00454, so σg=0.00454×9.811=0.045 m s−2. The timing dominates.

    Why people get this wrong: Forgetting the factor 2 from the square of t gives 0.024.

← All topics · Timed mock test →