Home / Courses / IIT JAM Physics / Practice / Fields in matter: polarisation and magnetisation

Fields in matter: polarisation and magnetisation

Electricity and magnetism · 9 questions and templates for IIT JAM Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    A dielectric with polarisation P→ is equivalent, for its field, to bound charges with densities
    1. ρb=∇⋅P→ and σb=−P→⋅nˆ
    2. ρb=−∇⋅P→ and σb=P→⋅nˆ
    3. ρb=−∇×P→ and σb=P→×nˆ
    4. ρb=|P→| and σb=0
    Answer and solution

    Answer: B

    The potential of the dipoles is 14πϵ0∫P→⋅𝓇ˆ𝓇2dτ. Writing 𝓇ˆ/𝓇2=∇′(1/𝓇) and integrating by parts gives a surface term with σb=P→⋅nˆ (nˆ outward) and a volume term with ρb=−∇⋅P→. Where P→ spreads out, positive ends leave and negative charge is left behind.
  2. MCQWarm-up

    A magnetised body with magnetisation M→ is equivalent to bound currents
    1. J→b=∇⋅M→, K→b=M→⋅nˆ
    2. J→b=−∇×M→, K→b=nˆ×M→
    3. J→b=∇×M→, K→b=M→×nˆ
    4. J→b=μ0M→, K→b=0
    Answer and solution

    Answer: C

    From A→=μ04π∫M→×𝓇ˆ𝓇2dτ and an integration by parts: volume current J→b=∇×M→ and surface current K→b=M→×nˆ (outward normal). For uniform M→ only the surface current survives, like the winding of a solenoid.

    Why people get this wrong: The order in M→×nˆ matters: nˆ×M→ has the opposite sign.

  3. NATWarm-up

    In a linear dielectric of susceptibility χe=2.0, the field is 1000 V/m. The polarisation is ______ nC/m2 (to one decimal place).
    Answer and solution

    Answer: 17.7 (±0.1)

    P=ϵ0χeE=8.854×10−12×2.0×1000=1.77×10−8 C/m2=17.7 nC/m2.
  4. MCQWarm-up

    Which field has a divergence equal to the free charge density alone?
    1. E→
    2. P→
    3. ϵ0E→−P→
    4. D→=ϵ0E→+P→
    Answer and solution

    Answer: D

    ϵ0∇⋅E→=ρf+ρb=ρf−∇⋅P→, so ∇⋅(ϵ0E→+P→)=ρf.
  5. NATWarm-up

    Inside a magnetic material B=1.00 T and M=7.0×105 A/m along the same direction. H is ______ kA/m (to one decimal place).
    Answer and solution

    Answer: 95.8 (±0.2)

    H=B/μ0−M=1.001.2566×10−6−7.0×105=7.958×105−7.0×105=9.58×104 A/m.
  6. MCQWarm-up

    Which field's lines never begin or end anywhere, even inside and around magnetised or polarised matter?
    1. E→
    2. D→
    3. H→
    4. B→
    Answer and solution

    Answer: D

    ∇⋅B→=0 always: no magnetic charges, bound or free. E→ lines start and end on all charges, D→ lines on free charges, and H→ lines start and end where ∇⋅M→≠0 (for example at the ends of a bar magnet).

    Why people get this wrong: Choosing H→ because it is "the magnetic field too"; its divergence is −∇⋅M→.

  7. NATStandard

    Inside a linear iron core with μr=1500 the magnetic field is B=1.2 T. The magnetisation is ______ kA/m (one decimal place).
    Answer and solution

    Answer: 954.3 kA/m (±1)

    H=Bμ0μr=1.21.2566×10−6×1500=636.6 A/m. Then M=χmH=(μr−1)H=1499×636.6=9.543×105 A/m. Almost all of B comes from the magnetisation: μ0M=1.1992 T, against μ0H=0.0008 T.

    Why people get this wrong: Using M=B/μ0, which ignores the small H (here it changes only the last digit, but not in general).

  8. NATExam level

    A long solenoid with 1000 turns per metre carries 2.0 A and is filled with a linear core of χm=499. The bound surface current on the core's curved surface is ______ kA/m.
    Answer and solution

    Answer: 998 kA/m (±1)

    Inside the long solenoid H=nI=2000 A/m (set by free current). M=χmH=9.98×105 A/m, and the bound surface current is Kb=|M→×nˆ|=M=998 kA/m, flowing the same way as the windings. So the core acts like 499 extra windings' worth of current for each real one.

    Why people get this wrong: Using μr=500 instead of χm=499; the bound current comes from M only.

  9. MSQExam level

    A bar magnet is uniformly magnetised along its length, with no free current anywhere. Which statements are true?
    1. B→ lines form closed loops, running from the N end to the S end outside and back from S to N inside
    2. Inside the magnet, H→ points from the N end towards the S end, opposite to M→
    3. The bound current flows around the curved side surface, like the winding of a solenoid
    4. The magnetic pole density −∇⋅M→ is spread throughout the volume
    Answer and solution

    Answer: A, B, C

    ∇⋅B→=0 makes B→ lines close on themselves. H→ behaves like an electrostatic field from "pole" charges M→⋅nˆ on the end faces (positive at the N end), so inside it points N to S, against M→. K→b=M→×nˆ is non-zero only on the side surface. For uniform M→, ∇⋅M→=0 inside: the poles live only on the end faces.

    Why people get this wrong: Expecting H→ and B→ to point the same way inside a permanent magnet.

← All topics · Timed mock test →