Home / Courses / IIT JAM Physics / Practice / Fluctuations, diffusion and Brownian motion (NET)

Fluctuations, diffusion and Brownian motion (NET)

Statistical physics · 4 questions and templates for IIT JAM Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    For a system of N weakly interacting particles in contact with a heat bath, the relative energy fluctuation ΔE/⟨E⟩
    1. grows like N
    2. falls like 1/N
    3. falls like 1/N
    4. does not depend on N
    Answer and solution

    Answer: C

    ⟨(ΔE)2⟩=kT2CV and both CV and ⟨E⟩ are proportional to N. So ΔE∝N and ΔE/⟨E⟩∝1/N. For N∼1023 this is about 10−12, which is why canonical and microcanonical ensembles agree for large systems.

    Why people get this wrong: The absolute spread grows with N; only the relative spread shrinks.

  2. NATStandard

    A sphere of radius 1.0 μm and density 1000 kg/m3 is in water at 300 K. Its rms velocity along one axis is ______ mm/s (two decimal places). Use k=1.381×10−23 J/K.
    Answer and solution

    Answer: 0.99 mm/s (±0.01)

    Equipartition: 12m⟨vx2⟩=12kT. m=43π(10−6)3×1000=4.19×10−15 kg, so vrms=kT/m=4.14×10−21/4.19×10−15=9.9×10−4 m/s =0.99 mm/s. This speed lasts only about m/6πηa≈0.2 μs before friction randomises it, so the observed motion is the slow diffusive drift, not this speed.

    Why people get this wrong: Using 3kT (all three components) or forgetting the cube of the radius.

  3. MCQExam level

    An inductor L is part of a circuit in equilibrium at temperature T. The mean square thermal current through it is
    1. kT/2L
    2. kT/L
    3. kTL
    4. kTL
    Answer and solution

    Answer: B

    The magnetic energy 12LI2 is quadratic in one variable, so equipartition gives 12L⟨I2⟩=12kT and ⟨I2⟩=kT/L, whatever the resistors. This is the twin of ⟨V2⟩=kT/C for a capacitor.

    Why people get this wrong: Dropping the 12 on only one side gives kT/2L.

← All topics · Timed mock test →