Home / Courses / IIT JAM Physics / Practice / Gauss, Stokes and Green theorems

Gauss, Stokes and Green theorems

Mathematical methods · 77 questions and templates for IIT JAM Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Gauss, Stokes and Green: the integral theorems.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    The divergence (Gauss) theorem states that for a smooth field F→ in a volume V bounded by the closed surface S,
    1. ∮CF→⋅dl→=∬S(∇×F→)⋅da→
    2. ∭V∇⋅F→dV=∬S(∇×F→)⋅da→
    3. ∭V∇⋅F→dV=∮SF→⋅da→
    4. ∭V∇ϕdV=∮SF→⋅da→
    Answer and solution

    Answer: C

    The total divergence inside (the sum of all the little sources) equals the net outward flux through the closed boundary: ∭V∇⋅F→dV=∮SF→⋅da→, with da→ pointing outward. Option A is Stokes' theorem.

    Why people get this wrong: Option A is a true theorem too, but it is Stokes', not Gauss's.

  2. MCQWarm-up

    In Stokes' theorem ∮CF→⋅dl→=∬S(∇×F→)⋅da→, the surface S must be
    1. a closed surface enclosing C
    2. any surface whose boundary is C, with its normal tied to the direction round C by the right-hand rule
    3. the flat surface inside C only
    4. a sphere through C
    Answer and solution

    Answer: B

    Stokes' theorem holds for every open surface whose edge is C. Curl the fingers of your right hand along the direction of travel round C: the thumb gives the side the normal points to. A closed surface has no edge at all.

    Why people get this wrong: Thinking the surface has to be flat. Any surface with the same edge works, which is what makes the theorem so useful.

  3. NATWarm-up

    The outward flux of F→=2xiˆ+3yjˆ+zkˆ through the surface of the unit cube 0≤x,y,z≤1 is ______.
    Answer and solution

    Answer: 6

    ∇⋅F→=2+3+1=6, a constant. By the divergence theorem the flux is 6× (volume) =6×1=6.
  4. MCQWarm-up

    Green's theorem for a region R in the xy-plane with boundary C taken anticlockwise reads ∮C(Pdx+Qdy)=
    1. ∬R(∂P∂x+∂Q∂y)dA
    2. ∬R(∂P∂y−∂Q∂x)dA
    3. ∬R(∂P∂x−∂Q∂y)dA
    4. ∬R(∂Q∂x−∂P∂y)dA
    Answer and solution

    Answer: D

    Green's theorem is Stokes' theorem for a flat region: with F→=(P,Q,0), (∇×F→)⋅kˆ=∂xQ−∂yP and da→=kˆdA for an anticlockwise boundary.

    Why people get this wrong: Option B has the right pieces in the wrong order: it gives minus the answer (the clockwise version).

  5. NATWarm-up

    The line integral ∮Cxdy, taken anticlockwise round the square with corners (0,0), (2,0), (2,2), (0,2), is ______.
    Answer and solution

    Answer: 4

    Green with P=0, Q=x: ∂xQ−∂yP=1, so the integral is the area, 2×2=4. Check directly: only the right side x=2 (going up, dy>0) and the left side x=0 contribute: ∫022dy+0=4.
  6. MSQWarm-up

    Which statements are correct?
    1. The divergence theorem uses a closed surface.
    2. Stokes' theorem needs a closed surface.
    3. Green's theorem in the plane is a special case of Stokes' theorem.
    4. The divergence theorem holds only for spherical surfaces.
    Answer and solution

    Answer: A, C

    A: yes, the flux is through the whole boundary of a volume. B: no, Stokes uses an open surface whose edge is the curve. C: yes, take F→=(P,Q,0) and a flat surface. D: no, any closed (piecewise smooth) surface works.
  7. MCQWarm-up

    For ϕ=xyz, the line integral ∫∇ϕ⋅dl→ along any path from (0,0,0) to (1,2,3) is
    1. 6
    2. 0
    3. 14
    4. different for different paths
    Answer and solution

    Answer: A

    The fundamental theorem for gradients: ∫AB∇ϕ⋅dl→=ϕ(B)−ϕ(A)=1⋅2⋅3−0=6, whatever the path. (14 is |r→B|2, unrelated.)

    Why people get this wrong: A gradient field is path independent; there is no need to pick a path and integrate.

  8. NATStandard

    The outward flux of F→=x2iˆ+y2jˆ+z2kˆ through the surface of the cube 0≤x,y,z≤2 is ______.
    Answer and solution

    Answer: 48

    ∇⋅F→=2x+2y+2z. Over the cube, ∭xdV=∫02xdx×2×2=2×4=8, and the same for y and z. Flux =2(8+8+8)=48.

    Why people get this wrong: Using the divergence at the centre times the volume works here only because the divergence is linear: 6×8=48. For a non-linear divergence it would be wrong.

  9. NATStandard

    The circulation of F→=(x−y)iˆ+(x+y)jˆ anticlockwise round the circle x2+y2=9 is kπ. Find k.
    Answer and solution

    Answer: 18

    (∇×F→)z=∂x(x+y)−∂y(x−y)=1+1=2. Circulation =2× area =2×9π=18π.

    Why people get this wrong: Using the radius 3 instead of the area 9π, or forgetting that −∂y(−y)=+1.

  10. MCQStandard

    A constant vector field F→=c→ crosses a closed surface of area A enclosing volume V. The net outward flux is
    1. |c→|A
    2. |c→|V
    3. depends on the shape of the surface
    4. 0
    Answer and solution

    Answer: D

    ∇⋅c→=0, so the flux is zero for every closed surface: whatever enters on one side leaves on the other.
  11. MCQStandard

    For ϕ=x2y+sin⁡z, the value of ∮C∇ϕ⋅dl→ round any closed curve C is
    1. the area enclosed by C
    2. 0
    3. 2π
    4. it depends on C
    Answer and solution

    Answer: B

    ∫ab∇ϕ⋅dl→=ϕ(b)−ϕ(a), and on a closed curve b=a. Equivalently, ∇×∇ϕ=0, so Stokes gives zero.
  12. NATStandard

    The outward flux of F→=yiˆ+zjˆ+xkˆ through the sphere of radius 5 centred at the origin is ______.
    Answer and solution

    Answer: 0

    ∇⋅F→=∂xy+∂yz+∂zx=0. So the flux through any closed surface is 0.

    Why people get this wrong: Starting a surface integral over the sphere. Always compute the divergence first.

  13. MCQStandard

    The value of ∮C(2ydx+5xdy) anticlockwise round the unit circle is
    1. 7π
    2. 3π
    3. −3π
    4. 10π
    Answer and solution

    Answer: B

    Green: P=2y, Q=5x, ∂xQ−∂yP=5−2=3. Times the area π: 3π.

    Why people get this wrong: Adding instead of subtracting gives 7π; subtracting the wrong way round gives −3π.

  14. NATStandard

    The outward flux of r→=xiˆ+yjˆ+zkˆ through the closed surface of the cylinder x2+y2≤1, 0≤z≤2 is kπ. Find k.
    Answer and solution

    Answer: 6

    ∇⋅r→=3 and the volume is π(1)2(2)=2π. Flux =6π.
  15. MCQStandard

    For F→=x2yiˆ+yzjˆ+xz3kˆ, the outward flux of ∇×F→ through the sphere x2+y2+z2=4 is
    1. 16π
    2. 4π
    3. 0
    4. −16π
    Answer and solution

    Answer: C

    Divergence theorem on ∇×F→: ∮(∇×F→)⋅da→=∫∇⋅(∇×F→)dV=0, because the divergence of a curl is always zero. (A closed surface has no edge, so Stokes also gives 0.)

    Why people get this wrong: Computing the curl and starting the surface integral: the answer is zero for every F→.

  16. MSQStandard

    For a simple closed curve C traversed anticlockwise and enclosing area A, which integrals equal A?
    1. ∮Cxdy
    2. −∮Cydx
    3. ∮Cydx
    4. 12∮C(xdy−ydx)
    Answer and solution

    Answer: A, B, D

    Green with (P,Q): A (0,x) gives ∬1dA. B (y,0) with a minus sign: −∬(0−1)dA=A. C: ∬(0−1)dA=−A. D: half of ∬2dA.

    Why people get this wrong: C has the wrong sign: ∮ydx=−A anticlockwise.

  17. NATStandard

    The outward flux of F→=3xiˆ−yjˆ+2zkˆ through the unit sphere is kπ. Find k (to two decimal places).
    Answer and solution

    Answer: 5.33 (±0.01)

    ∇⋅F→=3−1+2=4. Volume 43π. Flux =163π≈5.33π.

    Why people get this wrong: Dropping the minus sign on −y gives 6, not 4.

  18. MCQStandard

    A long straight wire of radius a carries a current I spread uniformly over its cross-section. By Ampère's law ∮B→⋅dl→=μ0Ienc, the field at distance r<a from the axis is
    1. μ0I2πr
    2. zero
    3. μ0Ir2πa2
    4. μ0I2πa
    Answer and solution

    Answer: C

    Take a circle of radius r about the axis. By symmetry B is the same all round it, so ∮B→⋅dl→=2πrB. The enclosed current is the fraction πr2/πa2 of I. So B=μ0Ir2/a22πr=μ0Ir2πa2: it grows linearly from zero on the axis and meets μ0I/2πa at the surface.

    Why people get this wrong: Inside the wire only the enclosed part of the current counts.

  19. NATStandard

    The outward flux of F→=xiˆ+yjˆ through the whole closed surface of the cylinder x2+y2≤4, 0≤z≤3 is ______ (to one decimal place).
    Answer and solution

    Answer: 75.4 (±0.1)

    ∇⋅F→=1+1=2, and the volume is π⋅22⋅3=12π, so the flux is 24π=75.4. Check directly: on the curved side F→⋅nˆ=ρ=2, over an area 2π⋅2⋅3=12π, giving 24π; the flat ends contribute nothing because F→ has no z component.

    Why people get this wrong: The divergence of xiˆ+yjˆ is 2, not 3; there is no z term.

  20. NATExam level

    The outward flux of F→=xyiˆ+yzjˆ+zxkˆ through the surface of the cube 0≤x,y,z≤1 is ______ (to one decimal place).
    Answer and solution

    Answer: 1.5 (±0.01)

    ∇⋅F→=y+z+x. Over the unit cube each of ∭xdV, ∭ydV, ∭zdV is 12. Flux =32=1.5.
  21. NATExam level

    For F→=xiˆ+yjˆ+zkˆ, the flux through the curved side only of the cylinder x2+y2=4, 0≤z≤3 (normal pointing away from the axis) is kπ. Find k.
    Answer and solution

    Answer: 24

    Whole closed surface: ∇⋅F→=3, volume 12π, flux 36π. Top (z=3, normal +kˆ): Fz=3 over area 4π gives 12π. Bottom (z=0, normal −kˆ): Fz=0, so 0. Curved side =36π−12π−0=24π. Check directly: on the side F→⋅nˆ=s=2, area 2π(2)(3)=12π, flux 24π.

    Why people get this wrong: Answering 36π: that is the flux through the closed surface, top included.

  22. MCQExam level

    The flux of F→=xiˆ+yjˆ+2zkˆ through the open upper hemisphere x2+y2+z2=1, z≥0 (normal pointing outward) is
    1. 4π3
    2. 16π3
    3. 8π3
    4. 2π
    Answer and solution

    Answer: C

    Close it with the flat disc z=0 (outward normal −kˆ). Closed surface: ∇⋅F→=4 times the half-ball volume 23π gives 8π3. Disc: F→⋅(−kˆ)=−2z=0 on z=0, so it adds nothing. Hemisphere flux =8π3.

    Why people get this wrong: 16π3 uses the volume of the whole ball.

  23. NATExam level

    Using Stokes' theorem, ∮C(zdx+xdy+ydz) anticlockwise (seen from above) round the circle x2+y2=4, z=0 equals kπ. Find k.
    Answer and solution

    Answer: 4

    F→=(z,x,y), so ∇×F→=(∂yy−∂zx, ∂zz−∂xy, ∂xx−∂yz)=(1,1,1). Through the flat disc (normal kˆ): 1×4π=4π. Directly: on z=0 only ∮xdy survives, which is the area 4π.
  24. MCQExam level

    Let F→=−yiˆ+xjˆx2+y2. Its line integral anticlockwise round the square of side 2 centred at (3,0) is
    1. 2π
    2. 0
    3. π
    4. 4π
    Answer and solution

    Answer: B

    For (x,y)≠(0,0), ∂x(xx2+y2)−∂y(−yx2+y2)=y2−x2(x2+y2)2+x2−y2(x2+y2)2=0. The square (from x=2 to 4) does not contain the origin, so Green's theorem applies and the integral is 0.

    Why people get this wrong: 2π is the answer for any curve that goes once round the origin. Here the origin is outside.

  25. NATExam level

    Evaluate ∮C[(x2−y)dx+(y2+x)dy] anticlockwise round the triangle with vertices (0,0), (2,0), (0,2).
    Answer and solution

    Answer: 4

    ∂xQ−∂yP=1−(−1)=2. The triangle has area 12(2)(2)=2. Integral =2×2=4. The x2 and y2 terms are exact differentials and drop out.
  26. MSQExam level

    A smooth field F→ has ∇⋅F→=0 everywhere in space. Which statements must be true?
    1. Its flux through every closed surface is zero.
    2. Two open surfaces with the same edge (normals chosen consistently) carry the same flux of F→.
    3. F→=∇×A→ for some vector field A→.
    4. F→ is conservative.
    Answer and solution

    Answer: A, B, C

    A: divergence theorem. B: the two surfaces together form a closed surface, so their fluxes (one counted inward) cancel. C: in all of space a divergence-free field is a curl. D: false; (−y,x,0) has zero divergence but curl 2kˆ.

    Why people get this wrong: Zero divergence (no sources) and zero curl (no swirl) are different conditions.

  27. NATExam level

    The value of ∮C(y2dx+x2dy) anticlockwise round the circle (x−1)2+y2=1 is kπ. Find k.
    Answer and solution

    Answer: 2

    ∂xQ−∂yP=2x−2y. Over a disc, ∬xdA=x‾A=1×π and ∬ydA=y‾A=0. So the integral is 2π−0=2π.

    Why people get this wrong: For a circle centred at the origin the answer would be 0. Shifting the centre is what makes the x term count.

  28. MCQExam level

    In a region, the electric field is E→=ar→ (SI units, a a constant, r→ from the origin). The charge inside a sphere of radius R centred at the origin is
    1. 4πε0aR3
    2. 43πε0aR3
    3. 3ε0a
    4. 4πε0aR2
    Answer and solution

    Answer: A

    Flux =E(R)×4πR2=aR⋅4πR2=4πaR3, and Q=ε0× flux. Check with the divergence: ρ=ε0∇⋅E→=3ε0a, times the volume 43πR3 gives the same.

    Why people get this wrong: Option C is the charge density, not the charge.

  29. NATExam level

    The outward flux of F→=(x+y)iˆ+(y+z)jˆ+(z+x)kˆ through the ellipsoid x24+y29+z2=1 is kπ. Find k.
    Answer and solution

    Answer: 24

    ∇⋅F→=1+1+1=3. The ellipsoid with semi-axes 2, 3, 1 has volume 43π(2)(3)(1)=8π. Flux =24π.

    Why people get this wrong: Using 4 and 9 as the semi-axes instead of 2 and 3.

  30. MCQExam level

    The circulation of F→=−yiˆ+xjˆ round the unit circle in the xy-plane, traversed clockwise as seen from the positive z-axis, is
    1. 2π
    2. π
    3. 0
    4. −2π
    Answer and solution

    Answer: D

    Anticlockwise the circulation is (∇×F→)z× area =2π. Reversing the direction reverses the sign: −2π. (By the right-hand rule, a clockwise path pairs with the normal −kˆ.)

    Why people get this wrong: Ignoring the word "clockwise". Examiners flip the orientation to test exactly this.

← All topics · Timed mock test →