Home / Courses / IIT JAM Physics / Practice / Maxwell's equations and electromagnetic waves

Maxwell's equations and electromagnetic waves

Electricity and magnetism · 76 questions and templates for IIT JAM Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Maxwell's equations and electromagnetic waves.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    Maxwell's displacement current density is
    1. ϵ0∂E→∂t
    2. σE→
    3. μ0∂B→∂t
    4. ρv→
    Answer and solution

    Answer: A

    Maxwell added J→d=ϵ0∂E→/∂t to Ampère's law: ∇×B→=μ0J→+μ0ϵ0∂E→/∂t. It is not a flow of charge, but it makes magnetic field exactly as a current does.

    Why people get this wrong: σE→ and ρv→ are conduction currents.

  2. NATWarm-up

    A plane electromagnetic wave in vacuum has an electric field amplitude of 300 V/m. Its magnetic field amplitude is ______ μT (to two decimal places).
    Answer and solution

    Answer: 1 $\mu$T (±0.01)

    In a plane wave in vacuum B0=E0/c=300/(3.00×108)=1.00×10−6 T.

    Why people get this wrong: Multiplying by c instead of dividing.

  3. MCQWarm-up

    Which of Maxwell's equations expresses the absence of magnetic monopoles?
    1. ∇⋅E→=ρ/ϵ0
    2. ∇×E→=−∂B→/∂t
    3. ∇⋅B→=0
    4. ∇×B→=μ0J→+μ0ϵ0∂E→/∂t
    Answer and solution

    Answer: C

    If magnetic charge existed, ∇⋅B→ would equal its density, as ∇⋅E→ equals electric charge density over ϵ0. ∇⋅B→=0 says magnetic field lines never start or end: the flux through any closed surface is zero.

    Why people get this wrong: Faraday's law is about induction, not monopoles.

  4. MSQWarm-up

    For a plane electromagnetic wave travelling in vacuum, which statements are correct?
    1. E→ is perpendicular to B→.
    2. Both fields are perpendicular to the direction of travel.
    3. E→ and B→ oscillate in phase.
    4. B0=cE0.
    Answer and solution

    Answer: A, B, C

    Plane waves in vacuum are transverse (∇⋅E→=∇⋅B→=0), with E→⟂B→ and E→×B→ along the direction of travel. Faraday's law gives kE0=ωB0, so they are in phase and B0=E0/c.

    Why people get this wrong: B0=cE0 would make B enormous; it is E0/c.

  5. NATWarm-up

    Using μ0=1.2566×10−6 H/m and ϵ0=8.854×10−12 F/m, the speed 1/μ0ϵ0 is ______ ×108 m/s (to three decimal places).
    Answer and solution

    Answer: 2.998 $10^8$ m/s (±0.002)

    μ0ϵ0=1.2566×10−6×8.854×10−12=1.1126×10−17 s2/m2, and 1/1.1126×10−17=2.998×108 m/s. Maxwell recognised this as the measured speed of light.

    Why people get this wrong: Forgetting the square root.

  6. MCQWarm-up

    The time-averaged intensity of a plane wave in vacuum with electric field amplitude E0 is
    1. cϵ0E02
    2. 12ϵ0E02
    3. 12cϵ0E02
    4. E02cμ0 with no factor
    Answer and solution

    Answer: C

    The energy density is u=ϵ0E2 (half electric, half magnetic); its average over a cycle is 12ϵ0E02. It travels at c, so I=12cϵ0E02=E022μ0c.

    Why people get this wrong: 12ϵ0E02 is the average energy density (J/m3), not the intensity (W/m2).

  7. MCQWarm-up

    Which list puts these electromagnetic waves in order of increasing frequency?
    1. radio, microwave, infrared, visible, ultraviolet, X-ray
    2. radio, infrared, microwave, visible, X-ray, ultraviolet
    3. X-ray, ultraviolet, visible, infrared, microwave, radio
    4. microwave, radio, infrared, visible, ultraviolet, X-ray
    Answer and solution

    Answer: A

    Frequency rises as wavelength falls: radio (metres and up), microwaves (mm to cm), infrared (μm), visible (400 to 700 nm), ultraviolet (10 to 400 nm), X-rays (below about 10 nm). The reversed list is in order of increasing wavelength.

    Why people get this wrong: Reading the list in order of wavelength instead of frequency.

  8. NATStandard

    A plane wave in vacuum has electric field amplitude 100 V/m. Its average intensity is ______ W/m2 (to one decimal place).
    Answer and solution

    Answer: 13.3 W/m$^2$ (±0.1)

    I=12cϵ0E02=12(3.00×108)(8.854×10−12)(104)=13.3 W/m2.

    Why people get this wrong: Using the rms field with the factor 12 as well (Erms2=E02/2 already contains it).

  9. MCQStandard

    The electric field of a plane wave in vacuum is E→=E0sin⁡(kz−ωt)xˆ (with k,ω>0). Its magnetic field points along
    1. −yˆ
    2. zˆ
    3. xˆ
    4. +yˆ, in phase with E→
    Answer and solution

    Answer: D

    The wave travels along +z (phase kz−ωt). E→×B→ must point along +zˆ; with E→ along xˆ, xˆ×yˆ=zˆ, so B→=(E0/c)sin⁡(kz−ωt)yˆ.

    Why people get this wrong: −yˆ would describe a wave going the other way.

  10. NATStandard

    Between the circular plates (area 0.010 m2) of a charging capacitor, the uniform electric field grows at 1.0×1012 V m−1 s−1. The displacement current between the plates is ______ mA (to one decimal place).
    Answer and solution

    Answer: 88.5 mA (±0.9)

    Id=ϵ0dΦEdt=ϵ0AdEdt=(8.854×10−12)(0.010)(1012)=0.0885 A. It equals the conduction current in the wires feeding the plates.

    Why people get this wrong: Thinking the current between the plates is zero because no charge crosses the gap.

  11. MCQStandard

    A beam of intensity I falls normally on a perfectly absorbing surface. The radiation pressure is
    1. 2I/c
    2. I/c
    3. Ic
    4. I/(2c)
    Answer and solution

    Answer: B

    Light carries momentum U/c for energy U. Absorbed at normal incidence, momentum I/c per unit area per second is delivered: pressure I/c. A perfect mirror reverses the momentum, giving 2I/c.

    Why people get this wrong: 2I/c is the reflecting case.

  12. NATStandard

    Sunlight of intensity 1360 W/m2 falls normally on a perfectly reflecting sail of area 1.0 m2. The force on the sail is ______ μN (to two decimal places).
    Answer and solution

    Answer: 9.07 $\mu$N (±0.05)

    Reflection reverses the momentum: F=2IA/c=2(1360)(1.0)/(3.00×108)=9.07×10−6 N. Tiny, but it never stops pushing, which is the idea behind solar sails.

    Why people get this wrong: Using I/c (absorber) halves the answer.

  13. MSQStandard

    Which statements about the displacement current are correct?
    1. Taking the divergence of the Ampère-Maxwell law and using Gauss's law gives the continuity equation ∇⋅J→+∂ρ/∂t=0.
    2. Without it, Ampère's law would contradict charge conservation whenever charge density changes.
    3. It produces a magnetic field in the same way as a conduction current.
    4. It consists of charges moving through the gap of a capacitor.
    Answer and solution

    Answer: A, B, C

    ∇⋅(∇×B→)=0, so 0=μ0∇⋅J→+μ0ϵ0∂(∇⋅E→)/∂t=μ0(∇⋅J→+∂ρ/∂t). Without the extra term we would need ∇⋅J→=0 always, false while a capacitor charges. The term enters Ampère's law exactly like J→, so it makes B→ just the same. No charge crosses the gap: it is a changing field.

    Why people get this wrong: The word "current" misleads: nothing flows.

  14. MCQStandard

    An electromagnetic wave travels in a non-magnetic medium of relative permittivity 4. Its speed is
    1. c/4
    2. c/2
    3. 2c
    4. c/16
    Answer and solution

    Answer: B

    v=1μϵ=cμrϵr=c4=c2. The refractive index is n=ϵr=2.

    Why people get this wrong: Dividing by ϵr instead of its square root.

  15. NATStandard

    Light of vacuum wavelength 600 nm enters water (n=1.33). Its wavelength in the water is ______ nm (to the nearest whole number).
    Answer and solution

    Answer: 451 nm (±1)

    The frequency is fixed by the source and does not change at a boundary; the speed falls to c/n, so λ=λ0/n=600/1.33=451 nm.

    Why people get this wrong: Changing the frequency instead of the wavelength.

  16. MCQStandard

    In a plane electromagnetic wave in vacuum, the energy density in the magnetic field is, compared with that in the electric field,
    1. c times larger
    2. c2 times smaller
    3. half as large
    4. equal at every instant
    Answer and solution

    Answer: D

    uB=B22μ0=E22μ0c2=ϵ0E22=uE, using B=E/c and c2=1/(μ0ϵ0). The tiny B is compensated by the tiny μ0.

    Why people get this wrong: Comparing B and E directly (B=E/c is "small") instead of the energies.

  17. NATStandard

    An FM radio station broadcasts at 100 MHz. The wavelength is ______ m (to two decimal places).
    Answer and solution

    Answer: 3 m (±0.01)

    λ=c/f=(3.00×108)/(1.00×108)=3.00 m. A quarter-wave antenna would be 75 cm long.

    Why people get this wrong: Using MHz as 103 Hz.

  18. MCQStandard

    A small lamp radiates equally in all directions. Far from it, how does the electric field amplitude E0 of its light depend on the distance r?
    1. E0∝1/r
    2. E0∝1/r2
    3. E0∝1/r
    4. E0 does not depend on r
    Answer and solution

    Answer: A

    The power crosses spheres of area 4πr2, so the intensity falls as I∝1/r2. Since I=12cϵ0E02, E0∝I∝1/r. (This 1/r radiation field outlasts the 1/r2 static fields far away, which is why radiation carries energy to infinity.)

    Why people get this wrong: Applying 1/r2 to the field amplitude; it is the intensity, the square of the field, that falls as 1/r2.

  19. NATStandard

    A plane light wave in vacuum has intensity 1000 W/m². The average electromagnetic energy stored in each cubic metre of the beam is ______ μJ (two decimal places).
    Answer and solution

    Answer: 3.34 μJ (±0.02)

    Energy moves with the wave at speed c, so the intensity is energy density times speed: I=⟨u⟩c. Hence ⟨u⟩=Ic=10003.00×108=3.34×10−6 J/m³.

    Why people get this wrong: Multiplying by c instead of dividing.

  20. MCQStandard

    To derive the wave equation for E→ in empty space, one takes the curl of one Maxwell equation and substitutes another. The two equations combined are
    1. Gauss's law for E→ and Gauss's law for B→
    2. Faraday's law and the Ampère-Maxwell law
    3. Gauss's law for E→ and Faraday's law
    4. Ampère's law without the displacement term and Gauss's law for B→
    Answer and solution

    Answer: B

    ∇×(∇×E→)=−∂∂t∇×B→ (Faraday), and the Ampère-Maxwell law in vacuum gives ∇×B→=μ0ε0∂E→∂t. With ∇×∇×E→=∇(∇⋅E→)−∇2E→ and ∇⋅E→=0 (Gauss, used only to drop a term), this becomes ∇2E→=μ0ε0∂2E→∂t2. Without the displacement term there is no wave at all.

    Why people get this wrong: Leaving out the displacement current; it is the term that makes light possible.

  21. NATStandard

    Sunlight at the Earth (1.5×1011 m from the Sun) has intensity 1360 W/m². The total power radiated by the Sun is about ______ ×1026 W (two decimal places).
    Answer and solution

    Answer: 3.85 ×10²⁶ W (±0.03)

    The Sun radiates equally in all directions, so its power crosses a sphere of radius r with the same intensity everywhere: P=4πr2I=4π×(1.5×1011)2×1360=3.85×1026 W.

    Why people get this wrong: Using the disc area πr2 instead of the sphere area 4πr2.

  22. NATExam level

    A 1.0 mW laser beam has a uniform circular cross-section of diameter 1.0 mm. The amplitude of its electric field is ______ V/m (to the nearest ten).
    Answer and solution

    Answer: 980 V/m (±10)

    I=P/A=10−3π(5.0×10−4)2=1273 W/m2. From I=12cϵ0E02: E0=2Icϵ0=25462.654×10−3=980 V/m.

    Why people get this wrong: Using the diameter as the radius (dividing the intensity by 4).

  23. MCQExam level

    A plane wave in vacuum has B→=B0cos⁡(kx+ωt)zˆ (k,ω>0). Its electric field is
    1. cB0cos⁡(kx+ωt)yˆ
    2. cB0cos⁡(kx+ωt)xˆ
    3. −cB0cos⁡(kx+ωt)yˆ
    4. (B0/c)cos⁡(kx+ωt)yˆ
    Answer and solution

    Answer: C

    The phase kx+ωt means travel along −xˆ. We need E→×B→ along −xˆ with B→ along zˆ (when the cosine is positive). yˆ×zˆ=+xˆ, so E→ must be along −yˆ: E→=−cB0cos⁡(kx+ωt)yˆ. Check with Faraday: ∂Bz/∂t=−ωB0sin⁡, and −(∇×E→)z=−∂Ey/∂x=−ckB0sin⁡=−ωB0sin⁡. ✓

    Why people get this wrong: Assuming every wave travels along +x and choosing +yˆ.

  24. MSQExam level

    Which statements about the Poynting vector S→=E→×B→/μ0 are correct?
    1. It gives the rate of energy flow per unit area.
    2. Its SI unit is W/m2.
    3. Poynting's theorem reads ∇⋅S→+∂u/∂t=−J→⋅E→.
    4. It is always zero when the fields are static.
    Answer and solution

    Answer: A, B, C

    Poynting's theorem is energy conservation for fields: the energy in a region falls by what flows out (∇⋅S→) and what the fields do on charges (J→⋅E→). Units: (V/m)(T)/(H/m) = W/m2. With static fields, S→ need not be zero: a battery feeding a resistor has steady E→ and B→, and S→ carries the energy from the battery to the resistor.

    Why people get this wrong: A static charge beside a magnet has non-zero S→ too, circulating with no net flow; "static" does not mean S→=0.

  25. NATExam level

    A straight wire of radius 1.0 mm and length 1.0 m has resistance 0.50 Ω and carries a steady 2.0 A. The magnitude of the Poynting vector at its surface is ______ W/m2 (to the nearest whole number).
    Answer and solution

    Answer: 318 W/m$^2$ (±3)

    At the surface E=V/L=IR/L along the wire and B=μ0I/(2πa) round it, so S=EBμ0=IRL⋅I2πa=I2R2πaL, pointing radially into the wire. S=4×0.502π(10−3)(1.0)=318 W/m2. Times the surface area 2πaL it gives exactly the Joule heating I2R=2 W: the energy enters from the field outside.

    Why people get this wrong: Dividing by the cross-section πa2; the energy enters through the side surface.

  26. MCQExam level

    Light falls normally from air on a flat glass surface (n=1.5). The fraction of the intensity reflected is
    1. 4%
    2. 20%
    3. 0.2%
    4. 10%
    Answer and solution

    Answer: A

    R=(n1−n2n1+n2)2=(−0.52.5)2=0.04. The amplitude ratio is −0.2 (a phase flip); intensity goes as its square.

    Why people get this wrong: 20% is the amplitude ratio, not the intensity.

  27. NATExam level

    Light falls normally from air on diamond (n=2.4). The percentage of intensity transmitted into the diamond is ______ (to one decimal place).
    Answer and solution

    Answer: 83 % (±0.2)

    R=(1.43.4)2=0.1696, so T=1−R=0.830, i.e. 83.0%. (In terms of fields, T=n2n1t2 with t=23.4, giving the same.)

    Why people get this wrong: Taking T=t2=0.346 and forgetting the factor n2/n1 (the wave is slower and denser in diamond).

  28. MCQExam level

    Unpolarised light falls from air on glass of refractive index 3. The reflected light is completely polarised when the angle of incidence is
    1. 30∘
    2. 45∘
    3. 60∘
    4. 54.7∘
    Answer and solution

    Answer: C

    At Brewster's angle tan⁡θB=n2/n1=3, so θB=60∘. There the reflected and refracted rays are perpendicular, and the component polarised in the plane of incidence is not reflected at all.

    Why people get this wrong: Using sin⁡θ=1/n (that is the critical angle idea, and it applies going from glass to air).

  29. NATExam level

    Copper has conductivity 5.8×107 S/m. The skin depth for a 1.0 MHz wave in copper is ______ μm (to one decimal place).
    Answer and solution

    Answer: 66.1 $\mu$m (±0.5)

    In a good conductor δ=2ωμ0σ=2(2π×106)(1.2566×10−6)(5.8×107)=4.37×10−9=6.61×10−5 m. The [skin depth calculator](/science/skin-depth-calculator/) gives it for any metal and frequency.

    Why people get this wrong: Using f in place of ω=2πf makes the answer 2π times too big.

  30. MSQExam level

    Which of these are correct forms of Maxwell's equations in linear matter, written with free charge ρf and free current J→f?
    1. ∇⋅H→=0
    2. ∇×H→=J→f+∂D→∂t
    3. ∇⋅D→=ρf
    4. ∇×E→=−∂B→∂t
    Answer and solution

    Answer: B, C, D

    In matter the source equations use D→ and H→ with free sources only: ∇⋅D→=ρf, ∇×H→=J→f+∂D→/∂t. The other two are unchanged: ∇⋅B→=0 and Faraday's law. ∇⋅H→=−∇⋅M→ is not zero in general.

    Why people get this wrong: It is B→, not H→, that always has zero divergence.

← All topics · Timed mock test →