Home / Courses / IIT JAM Physics / Practice / Double and triple integrals

Double and triple integrals

Mathematical methods · 83 questions and templates for IIT JAM Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Double and triple integrals in any coordinates.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. NATWarm-up

    The value of ∫02∫03xydydx is ______.
    Answer and solution

    Answer: 9

    The limits are constants and the integrand is a product, so the integral splits: (∫02xdx)(∫03ydy)=2×4.5=9.

    Why people get this wrong: Splitting into a product only works when the limits are constants and the integrand factorises.

  2. MCQWarm-up

    In plane polar coordinates the area element dA is
    1. drdθ
    2. r2drdθ
    3. drdθ/r
    4. rdrdθ
    Answer and solution

    Answer: D

    A small patch has radial side dr and arc side rdθ (an arc of angle dθ at radius r). They are at right angles, so dA=rdrdθ.

    Why people get this wrong: Writing drdθ: dθ is an angle, not a length. Check units: an area needs two lengths.

  3. MCQWarm-up

    In spherical coordinates (θ from the z-axis, ϕ round it) the volume element is
    1. rsin⁡θdrdθdϕ
    2. r2cos⁡θdrdθdϕ
    3. r2sin⁡θdrdθdϕ
    4. r2drdθdϕ
    Answer and solution

    Answer: C

    The cell has edges dr, rdθ (along a meridian) and rsin⁡θdϕ (along a circle of radius rsin⁡θ). The product is r2sin⁡θdrdθdϕ.

    Why people get this wrong: Forgetting sin⁡θ: circles of latitude shrink towards the poles, and so do the cells.

  4. NATWarm-up

    The area of the region x2+y2≤4, x≥0, y≥0, found as ∫0π/2∫02rdrdθ, is ______ (to three decimal places).
    Answer and solution

    Answer: 3.142 (±0.002)

    ∫02rdr=2 and ∫0π/2dθ=π/2. The area is 2×π/2=π=3.142: a quarter of the disc of area 4π.

    Why people get this wrong: Taking θ from 0 to 2π gives the whole disc.

  5. MSQWarm-up

    Over the disc x2+y2≤1, which of these integrals are zero by symmetry alone?
    1. ∬xdA
    2. ∬xydA
    3. ∬x2dA
    4. ∬x3y2dA
    Answer and solution

    Answer: A, B, D

    The disc is unchanged by x→−x. An integrand that changes sign under x→−x (odd in x) integrates to zero: x, xy and x3y2 are all odd in x. x2 is even and positive, so its integral is positive (π/4).

    Why people get this wrong: Thinking xy survives because it is even under (x,y)→(−x,−y). One reflection that flips its sign is enough.

  6. MCQWarm-up

    In cylindrical coordinates (s,ϕ,z) the volume element is
    1. sdsdϕdz
    2. dsdϕdz
    3. s2dsdϕdz
    4. szdsdϕdz
    Answer and solution

    Answer: A

    It is the polar area element sdsdϕ times the height dz: dV=sdsdϕdz.

    Why people get this wrong: s2 belongs to spherical coordinates (r2sin⁡θ), not cylindrical ones.

  7. MCQWarm-up

    The value of ∫01∫01ex+ydxdy is
    1. e−1
    2. e2
    3. 2(e−1)
    4. (e−1)2
    Answer and solution

    Answer: D

    ex+y=exey and the limits are constants, so the double integral splits into a product: (∫01exdx)(∫01eydy)=(e−1)2≈2.95.

    Why people get this wrong: A product of two equal integrals is a square, not twice the integral.

  8. MCQStandard

    The value of ∫01∫0x(x+y)dydx is
    1. 1/2
    2. 1/3
    3. 1
    4. 2/3
    Answer and solution

    Answer: A

    Inner integral (over y, with x fixed): [xy+y2/2]0x=x2+x2/2=3x2/2. Outer: ∫0132x2dx=12.

    Why people get this wrong: Integrating the outer variable first: the inner limit x must be used up before integrating over x.

  9. MCQStandard

    Changing the order of integration, ∫01∫x1f(x,y)dydx equals
    1. ∫01∫y1fdxdy
    2. ∫01∫0yfdxdy
    3. ∫01∫01fdxdy
    4. ∫0y∫01fdxdy
    Answer and solution

    Answer: B

    Draw the region: 0≤x≤1 and x≤y≤1, the triangle above the line y=x, with corners (0,0), (0,1), (1,1). For a fixed y between 0 and 1, x runs from 0 to y. So it is ∫01∫0yfdxdy.

    Why people get this wrong: Swapping the letters in the limits (∫y1) describes the other triangle, below the line.

  10. NATStandard

    The volume of a ball of radius 3, computed as ∫02π∫0π∫03r2sin⁡θdrdθdϕ, is ______ (to one decimal place).
    Answer and solution

    Answer: 113.1 (±0.1)

    The three integrals separate: ∫03r2dr=9, ∫0πsin⁡θdθ=2, ∫02πdϕ=2π. Product: 36π=113.1, which is 43π(3)3.

    Why people get this wrong: Integrating θ from 0 to 2π: sin⁡θ then integrates to zero. θ only goes from pole to pole, 0 to π.

  11. NATStandard

    The value of ∬x2+y2≤1(x2+y2)dA is ______ (to three decimal places).
    Answer and solution

    Answer: 1.571 (±0.002)

    In polar form x2+y2=r2 and dA=rdrdθ: ∫02π∫01r3drdθ=2π×14=π/2=1.571.

    Why people get this wrong: Dropping the Jacobian r gives 2π/3.

  12. MCQStandard

    A thin disc of radius R has surface density σ=kr, where r is the distance from its centre. Its mass is
    1. πkR2
    2. πkR3/3
    3. 2πkR3/3
    4. 2πkR2
    Answer and solution

    Answer: C

    Use rings of radius r and width dr, area 2πrdr: M=∫0Rkr⋅2πrdr=2πkR3/3.

    Why people get this wrong: Multiplying the density at the edge by the area (kR⋅πR2) treats a varying density as constant.

  13. NATStandard

    A uniform semicircular plate has radius 3π cm. Its centre of mass lies on the axis of symmetry at a distance ______ cm from the straight edge.
    Answer and solution

    Answer: 4 cm (±0.01)

    y‾=1A∬ydA=∫0π∫0Rrsin⁡θ⋅rdrdθπR2/2=(R3/3)(2)πR2/2=4R3π. With R=3π cm: y‾=4 cm.

    Why people get this wrong: Using 2R/π, which is the result for a thin semicircular wire (an arc), not a plate.

  14. MCQStandard

    The value of ∬whole planee−(x2+y2)dxdy is
    1. π
    2. π
    3. 2π
    4. π/2
    Answer and solution

    Answer: A

    In polar coordinates: ∫02π∫0∞e−r2rdrdθ=2π×12=π. The extra r makes the radial integral elementary. Since the double integral is also (∫e−x2dx)2, this proves ∫−∞∞e−x2dx=π.

    Why people get this wrong: π is the one-dimensional integral; the double integral is its square.

  15. MSQStandard

    The region between y=x2 and y=x for 0≤x≤1 is considered. Which statements are correct?
    1. Its area is ∫01∫xx2dydx.
    2. Its area is 1/6.
    3. Its area is ∫01∫x2xdydx.
    4. Its area is ∫01∫yydxdy.
    Answer and solution

    Answer: B, C, D

    On 0<x<1, x2<x, so the line is on top: y runs from x2 up to x. Area =∫01(x−x2)dx=1/2−1/3=1/6. The other order: for fixed y, x runs from y (on the line) to y (on the parabola), giving ∫01(y−y)dy=2/3−1/2=1/6 too. The first option has the limits upside down and gives −1/6.

    Why people get this wrong: Not checking which curve is on top: between 0 and 1, x2 is below x.

  16. NATStandard

    The value of ∫01∫01∫01(x+y+z)dxdydz is ______ (to one decimal place).
    Answer and solution

    Answer: 1.5 (±0.05)

    By linearity each term gives the same: ∫∫∫xdV=12×1×1. Three of them: 3/2. (It is the volume of the cube times the average of x+y+z, which is 3×12.)

    Why people get this wrong: Integrating x over x and forgetting to multiply by the lengths of the other two ranges is harmless here only because they are 1.

  17. MCQStandard

    The integral ∫02π∫0π/2sin⁡θdθdϕ gives the solid angle of
    1. a full sphere, 4π
    2. a hemisphere, 2π
    3. a hemisphere, π
    4. a quarter sphere, π
    Answer and solution

    Answer: B

    The solid-angle element is dΩ=sin⁡θdθdϕ. Here θ runs from the pole to the equator: the upper hemisphere. ∫0π/2sin⁡θdθ=1 and ∫dϕ=2π, so Ω=2π sr.

    Why people get this wrong: Thinking a hemisphere is π because θ only goes to π/2. The whole sphere is 4π, so half is 2π.

  18. NATStandard

    A thin uniform square plate of mass 3 kg and side 0.2 m spins about the axis through its centre perpendicular to its face. Its moment of inertia is ______ kg m².
    Answer and solution

    Answer: 0.02 kg m² (±0.0002)

    With the centre at the origin, I=σ∬(x2+y2)dA over |x|,|y|≤a/2. Each term gives σ⋅a⋅a312, so I=σa46=Ma26=3×0.046=0.02 kg m².

    Why people get this wrong: Ma2/12 is about an axis in the plane through the centre; the perpendicular axis adds both.

  19. MCQStandard

    The area of the region 1≤x2+y2≤4, x≥0, y≥0, found as ∫0π/2∫12rdrdθ, is
    1. 3π4
    2. π2
    3. 3π2
    4. 3π
    Answer and solution

    Answer: A

    ∫12rdr=4−12=32, times π2 for the angle: 3π4. Check: a quarter of the annulus area π(4−1).

    Why people get this wrong: Forgetting the factor r in dA=rdrdθ gives π/2.

  20. MCQExam level

    Over the triangle 0≤y≤x≤1, the value of ∬xydA is
    1. 1/8
    2. 1/4
    3. 1/6
    4. 1/12
    Answer and solution

    Answer: A

    For a fixed x, y runs from 0 to x: ∫0xxydy=x⋅x2/2=x3/2. Then ∫01x3/2dx=1/8=0.125.

    Why people get this wrong: Using the full square [0,1]2 gives 1/4; the triangle is only half the square but carries half of 1/4 by symmetry of xy.

  21. MCQExam level

    The value of ∫01∫y1ex2dxdy is
    1. e−1
    2. e/2
    3. it cannot be found in closed form
    4. (e−1)/2
    Answer and solution

    Answer: D

    As written, the inner integral ∫ex2dx has no elementary form. Reverse the order: the region is 0≤y≤x≤1, so for fixed x, y runs from 0 to x: ∫01∫0xex2dydx=∫01xex2dx=12[ex2]01=(e−1)/2.

    Why people get this wrong: Giving up because ex2 has no antiderivative: changing the order supplies the factor x that makes it easy.

  22. NATExam level

    The volume of the solid under the paraboloid z=4−x2−y2 and above the plane z=0 is ______ (to two decimal places).
    Answer and solution

    Answer: 25.13 (±0.03)

    The paraboloid meets z=0 on the circle r=2. In polar coordinates: V=∫02π∫02(4−r2)rdrdθ=2π[2r2−r4/4]02=2π(8−4)=8π=25.13.

    Why people get this wrong: Integrating over r from 0 to 4 (the height) instead of 0 to 2 (where the surface meets the base).

  23. NATExam level

    A ball of radius 1 m holds charge with density ρ=3cos2⁡θ C/m3 (θ the polar angle). The total charge is ______ C (to three decimal places).
    Answer and solution

    Answer: 4.189 C (±0.003)

    Q=∫02π∫0π∫013cos2⁡θr2sin⁡θdrdθdϕ. Radial part 1/3; angular part ∫0πcos2⁡θsin⁡θdθ=2/3 (put u=cos⁡θ); ϕ part 2π. Q=3×13×23×2π=4π/3=4.189 C.

    Why people get this wrong: Averaging cos2⁡θ to 1/2 (as in a plane) instead of 1/3 (the average over a sphere).

  24. MCQExam level

    With u=x+y and v=x−y, the area element dxdy becomes
    1. 2dudv
    2. dudv
    3. 12dudv
    4. −12dudv
    Answer and solution

    Answer: C

    ∂(u,v)∂(x,y)=|111−1|=−2. Its size is 2, so dudv=2dxdy and dxdy=12dudv. Areas use the absolute value of the Jacobian.

    Why people get this wrong: Using the Jacobian the wrong way round (2dudv), or keeping its sign.

  25. MSQExam level

    A solid cone has its apex at the origin, its axis along +z, height h and base radius R. Which statements are correct?
    1. Its volume is πR2h/3.
    2. Its curved surface is θ=tan−1⁡(R/h) in spherical coordinates.
    3. Its volume is ∫0h∫02π∫0Rz/hsdsdϕdz.
    4. Its centre of mass is at z=h/2.
    Answer and solution

    Answer: A, B, C

    At height z the cross-section is a disc of radius Rz/h, giving the third integral =∫0hπR2z2/h2dz=πR2h/3. The surface makes a fixed angle with the axis, tan⁡θ=R/h. The centre of mass: z‾=∫zπR2z2/h2dzπR2h/3=h4/4h3/3=34h from the apex, not h/2.

    Why people get this wrong: Most of the mass is near the wide base, so the centre of mass is closer to the base (h/4 from it).

  26. MCQExam level

    The value of ∫0∞∫0∞e−(x2+y2)dxdy is
    1. π/4
    2. π
    3. π/2
    4. π/2
    Answer and solution

    Answer: A

    The first quadrant is 0≤θ≤π/2: ∫0π/2∫0∞e−r2rdrdθ=π2×12=π4≈0.785. It is also (π/2)2, the square of the half-line Gaussian integral.

    Why people get this wrong: Using the full angle 2π gives π, the integral over the whole plane.

  27. MCQExam level

    In polar coordinates the disc x2+y2≤2x is described by
    1. r≤2sin⁡θ, 0≤θ≤π
    2. r≤2cos⁡θ, −π/2≤θ≤π/2
    3. r≤2, 0≤θ≤2π
    4. r≤cos⁡θ, −π/2≤θ≤π/2
    Answer and solution

    Answer: B

    Substitute: r2≤2rcos⁡θ, so r≤2cos⁡θ. This needs cos⁡θ≥0: −π/2≤θ≤π/2. It is the disc of radius 1 centred at (1,0), touching the origin.

    Why people get this wrong: r≤2sin⁡θ is the disc centred on the y-axis; r≤2 is a disc centred at the origin.

  28. NATExam level

    The value of ∬DxdA over the disc D:x2+y2≤2x is ______ (to three decimal places).
    Answer and solution

    Answer: 3.142 (±0.002)

    Quick way: ∬xdA=x‾×area. The disc has centre (1,0) and radius 1, so x‾=1 and the area is π: the integral is π=3.142. In polar form: ∫−π/2π/2cos⁡θ∫02cos⁡θr2drdθ=83∫cos4⁡θdθ=83⋅3π8=π.

    Why people get this wrong: Expecting zero by symmetry: the disc is symmetric about the x-axis, not about the y-axis.

  29. MCQExam level

    A uniform solid hemisphere of radius R rests on its flat face. Its centre of mass is at a height of
    1. R/2
    2. 4R/(3π)
    3. 3R/4
    4. 3R/8
    Answer and solution

    Answer: D

    Slice into discs: at height z the radius is R2−z2. z‾=∫0Rzπ(R2−z2)dz2πR3/3=πR4/42πR3/3=3R8.

    Why people get this wrong: 4R/(3π) is the semicircular plate (2D); R/2 is the hollow hemispherical shell.

  30. MCQExam level

    The average value of x2+y2+z2 over the ball of radius 1 is
    1. 3/5
    2. 1/3
    3. 1/2
    4. 3/4
    Answer and solution

    Answer: A

    Average =∫r2dVV=∫01r2⋅4πr2dr4π/3=4π/54π/3=35=0.60. Most of the volume is near the surface, so the average is above 1/2.

    Why people get this wrong: Averaging r2 over r from 0 to 1 with equal weight gives 1/3; the shells near the edge carry more volume.

← All topics · Timed mock test →