Home / Courses / IIT JAM Physics / Practice / Nuclear reactions, fission and fusion

Nuclear reactions, fission and fusion

Nuclear physics · 72 questions and templates for IIT JAM Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Nuclear reactions, fission and fusion.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    In Rutherford's first artificial transmutation, alpha particles hit nitrogen: 24He+714N→X+11H. The nucleus X is
    1. 817O
    2. 816O
    3. 918F
    4. 917F
    Answer and solution

    Answer: A

    Nucleon number: 4+14=A+1, so A=17. Charge: 2+7=Z+1, so Z=8, which is oxygen. X=817O.

    Why people get this wrong: Balance A and Z separately; Z fixes the element.

  2. NATWarm-up

    For the fusion reaction 2H+3H→4He+n, the atomic masses are 2H 2.014102 u, 3H 3.016049 u, 4He 4.002603 u and n 1.008665 u. With 1 u =931.5 MeV/c2, the energy released is ______ MeV (to two decimal places).
    Answer and solution

    Answer: 17.59 MeV (±0.02)

    Mass before: 2.014102+3.016049=5.030151 u. After: 4.002603+1.008665=5.011268 u. Mass lost: 0.018883 u. Q=0.018883×931.5=17.59 MeV.

    Why people get this wrong: Atomic masses are fine here: the electrons (one on each side) cancel.

  3. MCQWarm-up

    The energy released when one uranium-235 nucleus undergoes fission after capturing a slow neutron is about
    1. 2 MeV
    2. 200 MeV
    3. 20 MeV
    4. 2000 MeV
    Answer and solution

    Answer: B

    Binding energy per nucleon is about 7.6 MeV for uranium and about 8.5 MeV for the medium-mass fragments. About 236×0.9≈200 MeV is released, mostly as kinetic energy of the fragments (about 170 MeV).

    Why people get this wrong: A chemical reaction releases a few eV per molecule; fission gives about 108 times more per event.

  4. MCQWarm-up

    In a nuclear reaction, which of these quantities is NOT necessarily conserved?
    1. Electric charge
    2. Total number of nucleons
    3. The sum of the rest masses
    4. Total energy (rest plus kinetic)
    Answer and solution

    Answer: C

    Charge, nucleon number (baryon number), total energy, momentum and angular momentum are always conserved. The sum of rest masses changes by −Q/c2: that change is exactly what becomes kinetic energy (or is taken from it).

    Why people get this wrong: Mass is not separately conserved; mass and energy together are.

  5. MSQWarm-up

    Which statements about fission and fusion are correct?
    1. Fusing very light nuclei releases energy because binding energy per nucleon rises with mass number there.
    2. Splitting very heavy nuclei releases energy because the fragments have more binding energy per nucleon.
    3. The Sun gets most of its energy from the fission of heavy elements.
    4. Fusion needs very high temperatures so that nuclei can get close despite their electric repulsion.
    Answer and solution

    Answer: A, B, D

    The binding energy per nucleon curve rises steeply from hydrogen to a peak near iron and nickel (A≈56–62) and falls slowly beyond. Moving towards the peak from either side releases energy: fusion from the light end, fission from the heavy end. The Sun fuses hydrogen into helium (the pp chain); fission plays no part. Fusion needs millions of kelvin because the positive nuclei repel; tunnelling helps them through the barrier.

    Why people get this wrong: Both processes release energy for the same reason: the products are more tightly bound.

  6. MCQWarm-up

    "Thermal" neutrons in a reactor at about room temperature have a typical kinetic energy of
    1. 2 MeV
    2. 1 keV
    3. 1 eV
    4. 0.025 eV
    Answer and solution

    Answer: D

    Thermal means in equilibrium with the surroundings: kT at 293 K is 8.617×10−5×293=0.025 eV, with a speed of about 2200 m/s. Fission neutrons are born at about 2 MeV and must be slowed by a factor of about 108 in energy.

    Why people get this wrong: 2 MeV is the energy of a fission neutron when it is born, before moderation.

  7. NATStandard

    Cockcroft and Walton split lithium with protons: p+7Li→24He. Atomic masses: 1H 1.007825 u, 7Li 7.016003 u, 4He 4.002603 u; 1 u =931.5 MeV/c2. The Q-value is ______ MeV (to two decimal places).
    Answer and solution

    Answer: 17.35 MeV (±0.02)

    Before: 1.007825+7.016003=8.023828 u. After: 2×4.002603=8.005206 u. Δm=0.018622 u, Q=0.018622×931.5=17.35 MeV, shared between the two alpha particles.

    Why people get this wrong: Using the proton mass (1.007276 u) with atomic masses for the others leaves the electrons unbalanced.

  8. MCQStandard

    For 4He+14N→17O+1H, the atomic masses are 4.002603, 14.003074, 16.999132 and 1.007825 u. With 1 u =931.5 MeV/c2, the Q-value is
    1. −1.19 MeV
    2. +1.19 MeV
    3. −0.0013 MeV
    4. +17.3 MeV
    Answer and solution

    Answer: A

    Before: 18.005677 u. After: 18.006957 u. The products are heavier by 0.001280 u, so Q=−0.001280×931.5=−1.19 MeV. The reaction is endothermic: kinetic energy must be supplied.

    Why people get this wrong: −0.0013 is the mass difference in u, not the energy in MeV.

  9. MCQStandard

    If every nucleus in 1.0 g of uranium-235 undergoes fission releasing 200 MeV (NA=6.022×1023 mol−1, 1 MeV =1.602×10−13 J), the energy released is about
    1. 8.2×1013 J
    2. 8.2×1010 J
    3. 8.2×107 J
    4. 1.9×1013 J
    Answer and solution

    Answer: B

    Nuclei: (1.0/235)×6.022×1023=2.56×1021. Energy: 2.56×1021×200×1.602×10−13=8.2×1010 J, the same as burning about 3 tonnes of coal.

    Why people get this wrong: 8.2×1013 J is the energy per kilogram; the question asks about one gram.

  10. MCQStandard

    A reactor runs steadily at constant power. Its effective neutron multiplication factor k is
    1. less than 1
    2. greater than 1
    3. exactly 1
    4. zero, because control rods absorb all neutrons
    Answer and solution

    Answer: C

    k is the number of neutrons in one generation for every neutron in the one before. k=1 (critical) keeps the number of fissions per second constant. k<1 (subcritical) and the reaction dies away; k>1 (supercritical) and the power grows.

    Why people get this wrong: Critical is the normal working state of a reactor, not a dangerous one.

  11. NATStandard

    A research reactor produces 1.0 MW of thermal power. Each fission releases 200 MeV (1 MeV =1.602×10−13 J). The number of fissions per second is ______ ×1016 (to two decimal places).
    Answer and solution

    Answer: 3.12 $10^{16}$ per s (±0.02)

    Energy per fission: 200×1.602×10−13=3.204×10−11 J. Fissions per second =106/3.204×10−11=3.12×1016.

    Why people get this wrong: 1 MW =106 J/s.

  12. MCQStandard

    Why does a thermal reactor contain a moderator such as water or graphite?
    1. To absorb excess neutrons and stop the chain reaction
    2. To cool the fuel by carrying heat away
    3. To reflect gamma rays back into the core
    4. To slow fast fission neutrons, because uranium-235 is far more likely to fission with slow neutrons
    Answer and solution

    Answer: D

    Fission neutrons are born at about 2 MeV. The fission cross-section of uranium-235 for thermal neutrons (0.025 eV) is about 580 barns, hundreds of times larger than for fast neutrons. Elastic collisions with light nuclei slow the neutrons without absorbing many of them.

    Why people get this wrong: Absorbing neutrons is the job of the control rods (boron, cadmium); the moderator should absorb as few as possible.

  13. MSQStandard

    A proton hits a lithium-7 nucleus. Which of these sets of products are allowed by conservation of charge and nucleon number?
    1. 24He
    2. 7Be+n
    3. 4He+3He
    4. 8B+γ
    Answer and solution

    Answer: A, B

    Before: Z=1+3=4, A=1+7=8. Two alphas: Z=4, A=8: allowed. 7Be +n: Z=4, A=8: allowed (it needs energy, Q=−1.64 MeV, but it is not forbidden). 4He +3He: A=7: forbidden. 8B: Z=5: forbidden.

    Why people get this wrong: Allowed by conservation laws is not the same as exothermic; an endothermic channel opens above its threshold.

  14. MCQStandard

    A nucleus at rest splits into two fragments of mass numbers 95 and 140 that share 170 MeV of kinetic energy (neglect the neutrons). The lighter fragment carries about
    1. 101 MeV
    2. 69 MeV
    3. 85 MeV
    4. 170 MeV
    Answer and solution

    Answer: A

    Momentum conservation: the fragments have equal and opposite momenta p. Kinetic energy p2/2m is then inversely proportional to mass, so the light fragment gets the fraction 140/235: 170×140/235=101 MeV. The heavy one gets 69 MeV.

    Why people get this wrong: Equal momenta, not equal energies: the lighter fragment moves faster and carries more energy.

  15. NATStandard

    The D–T fusion reaction 2H+3H→4He+n releases 17.6 MeV. If the initial momentum is negligible, the kinetic energy carried by the neutron is ______ MeV (to two decimal places; use mass numbers 4 and 1 for the masses).
    Answer and solution

    Answer: 14.08 MeV (±0.02)

    Equal and opposite momenta, so the kinetic energies are inversely as the masses: Kn=Qmαmα+mn=17.6×45=14.08 MeV. The alpha particle keeps 3.52 MeV and heats the plasma; the neutron escapes to the blanket.

    Why people get this wrong: The lighter particle gets the larger share, four fifths here.

  16. MCQStandard

    Nuclear cross-sections are measured in barns. One barn is
    1. 10−24 m2
    2. 10−28 m2
    3. 10−15 m2
    4. 10−30 m2
    Answer and solution

    Answer: B

    1 b =10−28 m2=10−24 cm2=100 fm2, about the geometric cross-section of a medium nucleus (radius about 6 fm gives πr2≈1.1 b).

    Why people get this wrong: 10−24 is right in cm2, not in m2.

  17. MSQStandard

    Which of these reaction equations conserve both charge and nucleon number?
    1. n+92235U→56141Ba+3692Kr+3n
    2. n+92235U→54140Xe+3894Sr+2n
    3. 12H+13H→24He+11H
    4. 11H+511B→324He
    Answer and solution

    Answer: A, B, D

    First: Z: 92=56+36; A: 236=141+92+3. Balanced. Second: Z: 92=54+38; A: 236=140+94+2. Balanced. Third: Z: 1+1=2 but 2+1=3 after. Not balanced (the real product is a neutron). Fourth: Z: 1+5=6=3×2; A: 12=3×4. Balanced: this is the neutron-free "p–B11" fusion reaction.

    Why people get this wrong: Count the incoming neutron: 235+1=236 nucleons must come out.

  18. MCQStandard

    On average, how many neutrons are released when a uranium-235 nucleus undergoes fission after absorbing a slow neutron?
    1. about 1
    2. about 2.4
    3. exactly 3
    4. about 10
    Answer and solution

    Answer: B

    Each fission releases two or three prompt neutrons (sometimes fewer or more), averaging about 2.4 for U-235 with thermal neutrons, plus a small delayed fraction. A chain reaction needs one of them, on average, to cause another fission (k=1); the rest are lost to leakage and capture.

    Why people get this wrong: Counting the neutrons in a single written equation (often 3) as the average.

  19. NATExam level

    A nucleus with A=240 and binding energy per nucleon 7.6 MeV splits into two equal fragments with A=120 and 8.5 MeV per nucleon. The energy released is ______ MeV.
    Answer and solution

    Answer: 216 MeV (±0.5)

    Binding energy is the energy that would be needed to pull a nucleus apart, so the energy released is the gain in total binding energy: Q=2×120×8.5−240×7.6=2040−1824=216 MeV.

    Why people get this wrong: Q is (binding energy of products) minus (binding energy of reactants), the opposite order to the mass formula.

  20. MCQExam level

    The reaction α+14N→17O+p has Q=−1.19 MeV. Using the non-relativistic formula with masses in the ratio of the mass numbers, the threshold kinetic energy of the alpha particle (nitrogen at rest) is
    1. 1.19 MeV
    2. 0.93 MeV
    3. 1.53 MeV
    4. 5.36 MeV
    Answer and solution

    Answer: C

    Part of the projectile's energy must go into moving the centre of mass, which cannot be used for the reaction. Kth=−Q(1+mαmN)=1.19×(1+414)=1.19×1.286=1.53 MeV.

    Why people get this wrong: 5.36 MeV uses mN/mα, upside down. The correction is small when the target is heavy.

  21. NATExam level

    A narrow neutron beam enters a slab 5.0 cm thick containing 5.0×1028 nuclei per m3, each with a total cross-section of 2.0 b. The fraction of neutrons that cross the slab without any interaction is ______ (to three decimal places).
    Answer and solution

    Answer: 0.607 (±0.002)

    In a thin layer dx the fraction removed is nσdx, so I=I0e−nσx. Here nσ=5.0×1028×2.0×10−28=10 m−1, and nσx=10×0.050=0.50. Fraction =e−0.5=0.607.

    Why people get this wrong: Keep everything in SI: 1 b =10−28 m2 and 5.0 cm =0.050 m.

  22. MCQExam level

    For the slab in the previous question (n=5.0×1028 m−3, σ=2.0 b), the mean free path of a neutron is
    1. 1 cm
    2. 0.1 cm
    3. 100 cm
    4. 10 cm
    Answer and solution

    Answer: D

    Mean free path λ=1/(nσ)=1/(10 m−1)=0.10 m =10 cm. After one mean free path the beam has fallen to 1/e of its value.

    Why people get this wrong: The mean free path is 1/(nσ), not nσ.

  23. NATExam level

    A thin gold foil of mass 0.10 g (gold-197, molar mass 197 g/mol) sits in a thermal neutron flux of 1.0×1016 m−2 s−1. The capture cross-section is 99 b. The number of captures per second is ______ ×1010 (to two decimal places). NA=6.022×1023 mol−1.
    Answer and solution

    Answer: 3.03 $10^{10}$ per s (±0.02)

    Nuclei in the foil: N=(0.10/197)×6.022×1023=3.06×1020. For a thin target each nucleus presents an area σ, so the rate is R=σΦN=99×10−28×1016×3.06×1020=3.03×1010 per second.

    Why people get this wrong: For a thin foil the shape does not matter, only the number of nuclei.

  24. MSQExam level

    Which statements about fission chain reactions are correct?
    1. The effective multiplication factor depends on the size and shape of the core, because neutrons leak out through its surface.
    2. Delayed neutrons from fission products are what make a reactor controllable.
    3. Natural uranium is mostly uranium-235.
    4. Uranium-238 fissions readily with thermal neutrons.
    Answer and solution

    Answer: A, B

    First: production goes with volume, leakage with surface; small lumps leak too much, which is the idea of a critical mass. Second: about 0.65% of uranium-235 fission neutrons come seconds later from fission products; they stretch the effective generation time from about 10−4 s to about 0.1 s, slow enough for control rods. Third: false, natural uranium is 99.3% uranium-238 and only 0.72% uranium-235. Fourth: false; uranium-238 needs fast neutrons (above about 1 MeV) to fission, and mostly captures slow ones instead.

    Why people get this wrong: Uranium-238 is fertile (it turns into plutonium-239 after capturing a neutron), not fissile.

  25. MCQExam level

    In a head-on elastic collision with a nucleus of mass number A at rest, a neutron loses the fraction 4A/(A+1)2 of its kinetic energy. For carbon-12 this fraction is about
    1. 28%
    2. 100%
    3. 8%
    4. 14%
    Answer and solution

    Answer: A

    4×12/132=48/169=0.284, about 28%. For hydrogen (A=1) it is 100%: a head-on neutron stops dead, like equal billiard balls. That is why water, rich in hydrogen, is such a good moderator.

    Why people get this wrong: This is the most lost in one collision (head-on); the average over angles is half of it.

  26. NATExam level

    A 2.0 MeV neutron collides head-on and elastically with a deuteron at rest (take the mass ratio as 2). The neutron's kinetic energy afterwards is ______ MeV (to three decimal places).
    Answer and solution

    Answer: 0.222 MeV (±0.002)

    In a one-dimensional elastic collision the projectile's velocity becomes m−Mm+Mv=1−A1+Av. Energy: E′=E(A−1A+1)2=2.0×(13)2=0.222 MeV. The deuteron takes 8/9 of the energy.

    Why people get this wrong: Square the velocity ratio to get the energy ratio.

  27. MCQExam level

    Two deuterons must come within 3.0 fm of each other to fuse. With e2/(4πε0)=1.44 MeV fm, the Coulomb barrier they must overcome is about
    1. 4.8 MeV
    2. 0.48 MeV
    3. 1.44 MeV
    4. 0.048 MeV
    Answer and solution

    Answer: B

    U=e24πε0r=1.44 MeV fm3.0 fm=0.48 MeV. Classically that needs a temperature of about 4×109 K; real fusion happens at about 107–108 K because nuclei in the fast tail of the Maxwell distribution tunnel through the barrier.

    Why people get this wrong: Each deuteron has charge +e, so the product of charges is e2, not 2e2 or 4e2.

  28. MCQExam level

    The centre of the Sun is at about 1.5×107 K. With k=8.617×10−5 eV/K, the typical thermal energy kT there is about
    1. 12.9 keV
    2. 0.129 keV
    3. 1.29 keV
    4. 1.29 MeV
    Answer and solution

    Answer: C

    kT=8.617×10−5×1.5×107=1293 eV ≈1.3 keV. That is hundreds of times below the Coulomb barrier between two protons (about 0.5 MeV); fusion proceeds only by quantum tunnelling, and slowly, which is why the Sun lasts ten billion years.

    Why people get this wrong: Multiply the mantissas and add the exponents carefully: 10−5×107=102.

  29. MCQExam level

    The proton–proton chain turns four protons into one helium-4 nucleus, two positrons and two neutrinos. Using atomic masses (1H 1.007825 u, 4He 4.002603 u, 1 u =931.5 MeV/c2), the total energy released per helium nucleus formed, counting the annihilation of the positrons with electrons, is
    1. 24.7 MeV
    2. 17.6 MeV
    3. 7.1 MeV
    4. 26.7 MeV
    Answer and solution

    Answer: D

    Four hydrogen atoms (four protons plus four electrons) end as one helium atom (two electrons) with two positrons and two spare electrons annihilated. Atomic masses do this bookkeeping for you: Δm=4×1.007825−4.002603=0.028697 u, Q=26.7 MeV. A little of it (about 0.5 MeV on average) leaves with the neutrinos.

    Why people get this wrong: 24.7 MeV is the nuclear part only, before the two positrons annihilate (each annihilation gives 1.022 MeV).

  30. MCQExam level

    Bohr's compound nucleus model of nuclear reactions states that
    1. the way a compound nucleus decays does not depend on how it was formed, only on its energy and angular momentum
    2. the projectile passes through the nucleus without sharing its energy
    3. the products always fly off along the beam direction
    4. only the outermost nucleon takes part in the reaction
    Answer and solution

    Answer: A

    A slow projectile is absorbed and its energy is shared among all the nucleons; the compound nucleus lives long (about 10−16 s or more, compared with 10−22 s for a nucleon to cross the nucleus) and "forgets" how it was made. Its decay then depends only on conserved quantities. Products come out roughly isotropically in the centre-of-mass frame. The second and fourth options describe direct reactions.

    Why people get this wrong: Direct reactions (stripping, knock-out) are fast and forward-peaked; compound-nucleus reactions are slow and near-isotropic.

← All topics · Timed mock test →