Home / Courses / IIT JAM Physics / Practice / Partial differential equations and separation of variables

Partial differential equations and separation of variables

Mathematical methods · 19 questions and templates for IIT JAM Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    Laplace's equation uxx+uyy=0 is
    1. elliptic
    2. parabolic
    3. hyperbolic
    4. of mixed type
    Answer and solution

    Answer: A

    For Auxx+Buxy+Cuyy+…=0 the type is set by B2−4AC. Here A=C=1, B=0: B2−4AC=−4<0, elliptic. Elliptic equations describe equilibria (no time direction); data must be given on a closed boundary.

    Why people get this wrong: The type depends only on the second-derivative terms.

  2. MCQWarm-up

    The heat equation ut=κuxx (with κ>0) is
    1. elliptic
    2. hyperbolic
    3. parabolic
    4. not classifiable because it has only one second derivative
    Answer and solution

    Answer: C

    In the variables (x,t): A=κ, B=0, C=0 (there is no utt). B2−4AC=0: parabolic. Parabolic equations smooth things out and have a direction of time.

    Why people get this wrong: Missing a second derivative does not stop classification; it is exactly what makes B2−4AC=0.

  3. MCQWarm-up

    A string of length 0.5 m is fixed at both ends, and transverse waves travel on it at 200 m/s. Its fundamental frequency is
    1. 100 Hz
    2. 400 Hz
    3. 200 Hz
    4. 50 Hz
    Answer and solution

    Answer: C

    Separation gives modes sin⁡(nπx/L) with ωn=nπc/L, so fn=nc2L. For n=1: 2002×0.5=200 Hz.

    Why people get this wrong: Using c/L (400 Hz): the fundamental fits half a wavelength, so λ=2L.

  4. MSQWarm-up

    Which functions satisfy the two-dimensional Laplace equation uxx+uyy=0?
    1. x2−y2
    2. xy
    3. excos⁡y
    4. x2+y2
    Answer and solution

    Answer: A, B, C

    x2−y2: 2−2=0. xy: 0+0=0. excos⁡y: excos⁡y−excos⁡y=0. x2+y2: 2+2=4≠0. (The first three are real parts of analytic functions z2, −i2z2 and ez.)

    Why people get this wrong: x2+y2 looks symmetric, but symmetry is not what Laplace's equation asks for.

  5. MCQWarm-up

    The general solution of the one-dimensional wave equation utt=c2uxx is
    1. f(x−ct)+g(x+ct)
    2. f(x−ct)g(x+ct)
    3. f(x)e−ct
    4. f(x2−c2t2)
    Answer and solution

    Answer: A

    With ξ=x−ct and η=x+ct, the equation becomes uξη=0, so u=f(ξ)+g(η): one wave moving right and one moving left, each keeping its shape.

    Why people get this wrong: A product of the two is not a solution in general.

  6. MCQWarm-up

    The equation ut+uux=0 is
    1. first order and linear
    2. first order and non-linear
    3. second order and linear
    4. second order and non-linear
    Answer and solution

    Answer: B

    The highest derivative is first order. The term uux multiplies the unknown by its own derivative, so the equation is non-linear: the sum of two solutions is not a solution. (This is the inviscid Burgers equation, whose waves steepen into shocks.)

    Why people get this wrong: Having only first derivatives does not make an equation linear; look at how u enters the coefficients.

  7. MCQStandard

    A rod has one end held at 0 °C and the other at 100 °C. Long after it is set up, the temperature at its midpoint is
    1. 100/e °C
    2. 25 °C
    3. 50 °C
    4. 0 °C, since the transients decay to zero
    Answer and solution

    Answer: C

    In the steady state ut=0, so uxx=0 and the profile is a straight line: u=100x/L, giving 50 °C at the middle. The transients decay; the steady part stays.

    Why people get this wrong: Only the deviation from the straight line decays to zero.

  8. MCQStandard

    Putting u(x,y)=X(x)Y(y) into Laplace's equation uxx+uyy=0 leads to
    1. X′′X=Y′′Y=constant
    2. X′′=Y′′
    3. X′′Y′′=constant
    4. X′′X=−Y′′Y=constant
    Answer and solution

    Answer: D

    Substituting gives X′′Y+XY′′=0. Dividing by XY: X′′X=−Y′′Y. The left side depends only on x and the right only on y, so both equal the same constant. One factor then oscillates and the other grows or decays (e.g. sin⁡kxsinh⁡ky).

    Why people get this wrong: Dropping the minus sign would make both factors oscillate (or both grow), which does not satisfy Laplace's equation.

  9. NATStandard

    The function u=e−4tsin⁡kx satisfies the heat equation ut=uxx for a positive value of k equal to ______.
    Answer and solution

    Answer: 2

    ut=−4u and uxx=−k2u. Equal when k2=4, so k=2. Shorter waves (larger k) decay faster, as e−k2t.

    Why people get this wrong: Matching 4 with k instead of k2.

  10. MCQExam level

    On a very long string, a triangular bump of height 2 cm is held at rest and released. Long after release, the largest displacement on the string is
    1. 2 cm
    2. 1 cm
    3. 2 cm
    4. 0.5 cm
    Answer and solution

    Answer: B

    With zero initial velocity, u=12[f(x−ct)+f(x+ct)]: the bump splits into two half-height copies travelling apart. Once they no longer overlap, each has height 1 cm.

    Why people get this wrong: Energy is shared between two pulses, but the shapes add linearly, so each is exactly half as high.

  11. MCQExam level

    u satisfies Laplace's equation inside the disc r<a, with boundary values u(a,θ)=3+sin⁡θ+2cos2⁡θ. The value of u at the centre is
    1. 3
    2. 5
    3. 4
    4. 6
    Answer and solution

    Answer: C

    A harmonic function's value at the centre of a disc is the average of its values on the circle (mean value property). Averages over a full turn: 3→3, sin⁡θ→0, 2cos2⁡θ→1. So u(0)=4. (In full: 2cos2⁡θ=1+cos⁡2θ, and the solution is 4+rasin⁡θ+r2a2cos⁡2θ.)

    Why people get this wrong: Evaluating the boundary function at θ=0 (giving 5) instead of averaging it.

  12. NATExam level

    u(x,t) satisfies ut+3ux=0 with u(x,0)=e−x2. The value of u(5,1) is ______ (four decimal places).
    Answer and solution

    Answer: 0.0183 (±0.0002)

    u is constant along the characteristics x−3t= constant, so u(x,t)=e−(x−3t)2: the bump moves right at speed 3 without changing shape. At (5,1): e−(5−3)2=e−4≈0.0183.

    Why people get this wrong: Using x+3t moves the bump the wrong way and gives e−64≈0.

  13. MSQExam level

    A string 0<x<L with fixed ends obeys utt=c2uxx. Which statements hold for every smooth initial data?
    1. E=12∫0L(ut2+c2ux2)dx stays constant
    2. The motion repeats with period 2L/c
    3. A corner in the initial shape is gradually smoothed out
    4. maxx⁡|u| can never exceed its value at t=0
    Answer and solution

    Answer: A, B

    dEdt=∫(ututt+c2uxuxt)dx=c2[utux]0L=0 after integrating by parts, since ut=0 at fixed ends. Every mode sin⁡nπxL has angular frequency nπcL, all multiples of πc/L, so everything repeats after 2L/c. Corners travel along characteristics unchanged (no smoothing: that is the heat equation). A string that starts flat but moving has max⁡|u|=0 at t=0 and is displaced later, so the last statement fails.

    Why people get this wrong: Carrying heat-equation intuition (smoothing, maximum principle) over to the wave equation.

  14. NATExam level

    Between two concentric spheres, ∇2u=0 with u=10 on r=1 and u=0 on r=2. The value of u at r=1.5 is ______ (two decimal places).
    Answer and solution

    Answer: 3.33 (±0.01)

    A radial harmonic function in 3D is u=A+B/r. The conditions give A+B=10 and A+B/2=0, so B=20, A=−10. At r=1.5: −10+13.33=3.33.

    Why people get this wrong: Interpolating linearly in r gives 5; the 1/r form drops faster near the inner sphere.

  15. NATHard

    A rod 0≤x≤L with L=0.5 m has heat generated uniformly inside it, so that ut=κuxx+q with q/κ=400 K/m2. Both ends are held at 0 (temperatures measured above the surroundings). In the steady state, the temperature at the middle of the rod is ______ K (one decimal place).
    Answer and solution

    Answer: 12.5 K (±0.05)

    Steady state: u′′=−q/κ=−400. With u(0)=u(L)=0: u=200x(L−x). At x=L/2: 200⋅L24=50L2=12.5 K. (In general the peak is qL28κ.)

    Why people get this wrong: Solving u′′=+400 gives a negative temperature: heat generation makes the middle hotter than the ends.

← All topics · Timed mock test →