Home / Courses / IIT JAM Physics / Practice / Rigid body dynamics: inertia tensor, Euler's equations and tops

Rigid body dynamics: inertia tensor, Euler's equations and tops

Classical mechanics (GATE and NET) · 16 questions and templates for IIT JAM Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. NATWarm-up

    A uniform solid cube has mass 6 kg and side 1 m. Its moment of inertia about any axis through its centre is ______ kg m².
    Answer and solution

    Answer: 1 kg m²

    About an axis through the centre parallel to an edge, I=M(a2+a2)/12=Ma2/6=1 kg m². All three principal moments are equal, so the inertia tensor is a multiple of the unit matrix and every axis through the centre (including a body diagonal) gives the same value.

    Why people get this wrong: Students often expect the diagonal to be different; symmetry makes the cube behave like a sphere for rotation.

  2. NATWarm-up

    A gyroscope wheel (I=0.002 kg m², spinning at 200 rad/s) of mass 0.5 kg is supported at one end of its horizontal axle, its centre of mass 0.1 m from the pivot. Its precession rate is ______ rad/s (g=9.8 m/s²).
    Answer and solution

    Answer: 1.225 rad/s (±0.01)

    Gravity's torque Mgr=0.49 N m turns the horizontal angular momentum Iω=0.4 kg m²/s, so Ω=Mgr/(Iω)=1.225 rad/s (for a fast spin, ignoring the small extra angular momentum of the precession itself).
  3. MCQWarm-up

    The perpendicular-axis theorem Iz=Ix+Iy holds for
    1. any rigid body, with the axes through its centre of mass
    2. any body with an axis of symmetry along z
    3. a flat body lying in the xy plane, with the three axes meeting at a point of that plane
    4. circular discs and rings only
    Answer and solution

    Answer: C

    Ix=∑m(y2+z2) and Iy=∑m(x2+z2), so Ix+Iy=∑m(x2+y2)+2∑mz2=Iz+2∑mz2. This equals Iz only when every mass element has z=0: a lamina in the xy plane. The meeting point can be anywhere in the plane, not just the centre of mass.

    Why people get this wrong: It is the parallel-axis theorem that works for any body; the perpendicular-axis theorem needs a flat body.

  4. MCQStandard

    A uniform solid ball rolls without slipping along a level floor. The fraction of its kinetic energy that is rotational is
    1. 25
    2. 27
    3. 57
    4. 12
    Answer and solution

    Answer: B

    Rolling: ω=v/R. Krot=12⋅25mR2ω2=15mv2 and Ktrans=12mv2. Fraction: 1/51/2+1/5=27.

    Why people get this wrong: 25 is the ratio Krot/Ktrans, not the fraction of the total.

  5. MCQExam level

    A thin uniform rod of mass M and length L turns about an axis through its centre that makes an angle α with the rod. Its moment of inertia about this axis is
    1. ML212cos2⁡α
    2. ML212sin2⁡α
    3. ML212
    4. ML23sin2⁡α
    Answer and solution

    Answer: B

    A point at distance s along the rod is ssin⁡α from the axis. I=∫−L/2L/2ML(ssin⁡α)2ds=ML212sin2⁡α. Equivalently, the rod's inertia tensor has principal moments 0 (along the rod) and ML2/12 (twice), and I=nˆ𝖳Inˆ picks out the perpendicular component sin2⁡α. Checks: α=90∘ gives ML2/12, and α=0 gives 0.

    Why people get this wrong: Using cos⁡α projects onto the rod instead of measuring the distance from the axis.

  6. MCQExam level

    A solid ball of radius R rests on a table. It is struck by a short horizontal blow along a line through the vertical plane of its centre. For the ball to roll without slipping immediately (no friction needed), the blow must be at a height above the centre of
    1. 2R/5
    2. R/2
    3. 2R/3
    4. 0 (through the centre)
    Answer and solution

    Answer: A

    An impulse J at height h above the centre gives Mv=J and Iω=Jh, so ω=Mvh/I. Rolling needs ω=v/R: Mvh/(25MR2)=v/R, giving h=25R. (This point, 75R above the table, is the centre of percussion about the contact point.) Hit lower and the ball skids; hit higher and it spins forward too fast.

    Why people get this wrong: Measuring the height from the table gives 7R/5; the question asks from the centre.

  7. MCQExam level

    A solid sphere, a solid disc, a thin hollow sphere and a thin hoop are released together from rest and roll without slipping down the same incline. Their order of arrival at the bottom (first to last) is
    1. disc, solid sphere, hoop, hollow sphere
    2. hoop, hollow sphere, disc, solid sphere
    3. solid sphere, disc, hollow sphere, hoop
    4. all arrive together, since g is the same
    Answer and solution

    Answer: C

    Rolling acceleration a=gsin⁡θ1+I/(MR2). The ratios I/(MR2) are: solid sphere 25, disc 12, hollow sphere 23, hoop 1. Smaller ratio means less energy stored in spin and a larger acceleration. Order: solid sphere, disc, hollow sphere, hoop. Mass and radius do not matter.

    Why people get this wrong: Thinking heavier or larger objects roll faster; only the shape factor I/MR2 enters.

  8. MCQExam level

    A wheel of radius R rolls without slipping at constant speed v along level ground. The acceleration of the material point momentarily in contact with the ground is
    1. zero, since the point is momentarily at rest
    2. v2/R, directed up towards the centre
    3. v2/R, directed downwards
    4. 2v2/R, directed up
    Answer and solution

    Answer: B

    In the frame moving with the axle (an inertial frame, since v is constant) every rim point moves on a circle at speed v, so its acceleration is v2/R towards the centre. Changing to the ground frame adds a constant velocity and no acceleration. At the contact point the velocity is zero but the acceleration is v2/R upward: it is just leaving the ground on a cusped cycloid.

    Why people get this wrong: Zero velocity does not mean zero acceleration (like a ball at the top of its flight).

  9. MCQExam level

    A uniform rod stands upright on perfectly smooth ice and is given a tiny push, so it topples onto the ice. The path of its centre of mass is
    1. a vertical straight line
    2. a circular arc about the lower end
    3. a parabola
    4. a quarter of an ellipse
    Answer and solution

    Answer: A

    The only external forces are gravity and the normal force from the smooth ice; both are vertical. So the horizontal momentum stays zero and the centre of mass moves straight down. The lower end slides sideways to allow this. (Each other point of the rod traces part of an ellipse.)

    Why people get this wrong: The arc about the lower end would be right only if friction held that end in place.

  10. NATHard

    A solid cylinder is launched along a rough horizontal floor with speed v0 and no spin. Friction acts until it rolls without slipping. The fraction of its initial kinetic energy lost to friction is ______ (to three decimal places).
    Answer and solution

    Answer: 0.333 (±0.002)

    Angular momentum about the contact line is conserved (friction acts through it, gravity and the normal force cancel): Mv0R=MvR+12MR2⋅vR=32MvR, so v=23v0. Final energy 12Mv2+12⋅12MR2(v/R)2=34Mv2=34M⋅49v02=13Mv02. Initial 12Mv02. Fraction kept 23, lost 13, whatever the friction coefficient.

    Why people get this wrong: Expecting the loss to depend on μ: a larger μ just makes the sliding phase shorter.

  11. NATHard

    A uniform rod 1.2 m long swings as a physical pendulum about a horizontal pivot through the rod. Take g=9.8 m/s². The smallest possible period of small oscillations (choosing the pivot point to minimise it) is ______ s (to two decimal places).
    Answer and solution

    Answer: 1.67 s (±0.01)

    With the pivot a distance d from the centre: T=2πIMgd=2πL2/12+d2gd. The function L2/12d+d is smallest at d=L/12=0.346 m (the radius of gyration), where it equals 2d=0.693 m. So Tmin⁡=2π0.693/9.8≈1.67 s.

    Why people get this wrong: Pivoting at the end (d=L/2, period 1.80 s) is not the fastest; the optimum is at the radius of gyration.

  12. MCQHard

    A uniform solid cylinder lies on a horizontal plank. The plank is pulled along a smooth floor with constant acceleration A, and the cylinder rolls on it without slipping. In the ground frame, the acceleration of the cylinder's axis is
    1. A/3
    2. A/2
    3. 2A/3
    4. A
    Answer and solution

    Answer: A

    Only friction f acts horizontally on the cylinder: f=Ma (forward). Its torque about the axis gives fR=12MR2α, so αR=2a. No slipping: the contact point of the cylinder moves with the plank, a+αR=A (the cylinder spins backwards relative to its motion). So 3a=A and a=A/3.

    Why people get this wrong: 2A/3 is the cylinder's acceleration relative to the plank (backwards), not relative to the ground.

  13. NATHard

    A uniform rod 1.2 m long stands upright on smooth ice and topples (from rest). Take g=9.8 m/s². The speed of its centre of mass just before the rod lies flat is ______ m/s (to two decimal places).
    Answer and solution

    Answer: 2.97 m/s (±0.02)

    The centre of mass falls vertically (no horizontal force). With θ the angle from the vertical, its height is L2cos⁡θ, so vcm=L2sin⁡θθ˙, which is L2θ˙ at θ=90∘. Energy: MgL2=12M(L2θ˙)2+12⋅ML212θ˙2=16ML2θ˙2, so θ˙2=3g/L and vcm=123gL=1235.28=2.97 m/s.

    Why people get this wrong: Putting all the energy into the fall of the centre (12Mv2=MgL2) gives gL=3.43 m/s; the spin about the centre takes a quarter of the energy.

  14. NATHard

    A uniform rod 1.2 m long lies at rest on smooth ice. A sharp horizontal blow is struck at one end, perpendicular to the rod. Just after the blow, the point of the rod that is momentarily at rest is ______ m from the struck end (to two decimal places).
    Answer and solution

    Answer: 0.8 m (±0.01)

    Impulse J: vcm=J/M and, about the centre, JL2=ML212ω, so ω=6J/ML. A point a distance d beyond the centre (away from the struck end) moves at vcm−ωd, which vanishes for d=vcm/ω=L/6=0.2 m. From the struck end: 0.6+0.2=0.8 m, that is 2L/3.

    Why people get this wrong: The rod does not pivot about its far end or its centre; the rest point is two-thirds of the way along.

← All topics · Timed mock test →