Home / Courses / IIT JAM Physics / Practice / Semiconductors and the Fermi level

Semiconductors and the Fermi level

Solid state physics and devices · 69 questions and templates for IIT JAM Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Semiconductors and the Fermi level.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    Which impurity, added in small amounts to pure silicon, makes it n-type?
    1. boron
    2. phosphorus
    3. aluminium
    4. gallium
    Answer and solution

    Answer: B

    Silicon has 4 valence electrons. Phosphorus (group 15) has 5: four go into bonds and the fifth is so loosely held that it is free at room temperature. Phosphorus is a donor, giving an n-type material. Boron, aluminium and gallium (group 13) have 3 valence electrons and are acceptors (p-type).

    Why people get this wrong: Mixing up the groups: a donor has one electron more than the host atom, an acceptor one fewer.

  2. MCQWarm-up

    In an intrinsic semiconductor whose electrons and holes have equal effective masses, the Fermi level lies
    1. exactly at the middle of the band gap
    2. at the bottom of the conduction band
    3. at the top of the valence band
    4. inside the conduction band
    Answer and solution

    Answer: A

    Intrinsic means n=p. With n=Nce−(Ec−EF)/kT and p=Nve−(EF−Ev)/kT, equal densities of states (Nc=Nv, equal masses) force Ec−EF=EF−Ev: the Fermi level sits at mid-gap. Unequal masses shift it by 34kTln⁡(mh∗/me∗), a few meV.

    Why people get this wrong: Thinking the Fermi level must be at an energy where electrons actually are. It is a statistical marker, and here it lies in the gap where there are no states at all.

  3. NATWarm-up

    The thermal energy kBT at T=300 K is ______ meV (to one decimal place). Take kB=8.617×10−5 eV/K.
    Answer and solution

    Answer: 25.9 meV (±0.1)

    kBT=8.617×10−5×300=0.02585 eV =25.9 meV. Remember it: compared with gaps of about 1 eV, kT is 40 times smaller, which is why carrier densities depend so steeply on temperature.

    Why people get this wrong: Using kB=1.38×10−23 J/K and forgetting to divide by e to get eV.

  4. MCQWarm-up

    In a non-degenerate semiconductor in thermal equilibrium, the electron and hole densities n and p satisfy
    1. n+p=ni
    2. n=p always
    3. n−p=ni2
    4. np=ni2
    Answer and solution

    Answer: D

    Multiplying n=Nce−(Ec−EF)/kT by p=Nve−(EF−Ev)/kT gives np=NcNve−Eg/kT, which does not depend on the Fermi level, so it is the same as in the intrinsic material: np=ni2. Doping raises one carrier and lowers the other.

    Why people get this wrong: n=p is true only for intrinsic material; the mass action law holds for doped material too.

  5. MSQWarm-up

    Which statements about an n-type semiconductor are correct?
    1. Electrons are the majority carriers.
    2. The material carries a net negative charge.
    3. Its Fermi level is above the intrinsic level Ei.
    4. It has more holes than an intrinsic sample of the same material.
    Answer and solution

    Answer: A, C

    Majority electrons: true. Net negative charge: false. Each extra electron comes with a positive donor ion left behind, so the crystal stays neutral. Above Ei: true: more electrons means EF closer to Ec. More holes: false. By np=ni2, raising n lowers p below ni.

    Why people get this wrong: Thinking "n-type" means negatively charged. It refers to the sign of the majority carrier only.

  6. NATWarm-up

    A semiconductor with band gap 1.42 eV starts to absorb light strongly below a certain wavelength. That wavelength is ______ nm (to the nearest nm). Take hc=1240 eV nm.
    Answer and solution

    Answer: 873 nm (±2)

    A photon is absorbed across the gap when hc/λ≥Eg, that is for λ≤hc/Eg=1240/1.42=873 nm (near infrared). Longer wavelengths pass through.

    Why people get this wrong: Getting the inequality backwards: shorter wavelengths carry more energy and are the ones absorbed.

  7. MCQWarm-up

    Perfectly pure silicon at absolute zero temperature is
    1. a good conductor, because silicon has four valence electrons
    2. an insulator
    3. a superconductor
    4. n-type, because electrons are lighter than holes
    Answer and solution

    Answer: B

    At 0 K every valence-band state is full and every conduction-band state is empty; with a gap of about 1.17 eV and no thermal energy, no electron can be excited. A full band carries no current, so the crystal insulates. Conduction appears only when temperature, light or impurities supply carriers.

    Why people get this wrong: A semiconductor is not "half a conductor" at all temperatures: its conductivity comes entirely from excited or added carriers.

  8. NATStandard

    Silicon with ni=1.5×1010 cm−3 is doped with 5×1015 donors per cm3, all ionised. The hole density is ______ ×104 cm−3 (to one decimal place).
    Answer and solution

    Answer: 4.5 ×10⁴ cm⁻³ (±0.05)

    n≈Nd=5×1015 cm−3 (far above ni). Then p=ni2/n=(2.25×1020)/(5×1015)=4.5×104 cm−3: a hundred billion times fewer holes than electrons.

    Why people get this wrong: Taking p=ni or p=Nd; doping pushes the minority carriers far below ni.

  9. MCQStandard

    At any temperature above absolute zero, the probability that an electron state at the Fermi energy is occupied is
    1. 0
    2. 1
    3. 1/2
    4. 1/e
    Answer and solution

    Answer: C

    f(E)=1e(E−EF)/kT+1. At E=EF the exponent is zero: f=1/(1+1)=1/2. This is the definition of the Fermi level at finite temperature.

    Why people get this wrong: 1/e would come from forgetting the +1 in the denominator.

  10. NATStandard

    At 300 K, the probability that a state 0.10 eV above the Fermi level is occupied is ______ (to four decimal places). Take kT=0.02585 eV.
    Answer and solution

    Answer: 0.0205 (±0.0003)

    E−EFkT=0.100.02585=3.868, e3.868=47.9, so f=147.9+1=0.0205. Already the Boltzmann tail e−3.868=0.0209 is close.

    Why people get this wrong: Leaving out the +1 is nearly harmless here but badly wrong for states within kT of EF.

  11. MCQStandard

    Intrinsic silicon has ni=1.0×1010 cm−3, μn=1350 cm2/V s and μp=480 cm2/V s. Its conductivity is about
    1. 2.2×10−6 S/cm
    2. 1.5×10−6 S/cm
    3. 2.9×10−6 S/cm
    4. 2.9×10−3 S/cm
    Answer and solution

    Answer: C

    σ=e(nμn+pμp)=eni(μn+μp)=1.602×10−19×1010×1830=2.93×10−6 S/cm. Its resistivity, about 3.4×105 Ω cm, shows why pure silicon is nearly an insulator.

    Why people get this wrong: 2.2×10−6 counts electrons only; intrinsic material has equally many holes, which also conduct.

  12. MCQStandard

    Which of these semiconductors has a direct band gap and is therefore used for efficient light-emitting diodes?
    1. silicon
    2. germanium
    3. diamond
    4. gallium arsenide
    Answer and solution

    Answer: D

    In GaAs the top of the valence band and the bottom of the conduction band are at the same crystal momentum (k=0), so an electron can drop across the gap by emitting just a photon. Si, Ge and diamond have indirect gaps: the transition also needs a phonon to supply momentum, which makes light emission very weak.

    Why people get this wrong: Silicon dominates electronics, but it is a poor light emitter because its gap is indirect.

  13. MCQStandard

    As the temperature of an intrinsic semiconductor rises, its resistivity
    1. falls, roughly as eEg/2kT
    2. rises linearly, as in a metal
    3. stays constant
    4. rises, because the lattice vibrates more
    Answer and solution

    Answer: A

    The number of carriers ni∝T3/2e−Eg/2kT grows very fast with temperature. Mobility falls slowly (more phonon scattering), but the exponential wins, so ρ∝eEg/2kT (times a weak power of T) falls steeply. This is the opposite of a metal.

    Why people get this wrong: Applying the metal picture: in a metal the number of carriers is fixed and only scattering changes.

  14. MSQStandard

    Which statements about acceptor doping of silicon are correct?
    1. Boron is an acceptor in silicon.
    2. The acceptor level lies just above the top of the valence band.
    3. An ionised acceptor carries a positive charge.
    4. In p-type silicon the Fermi level lies below the intrinsic level.
    Answer and solution

    Answer: A, B, D

    Boron: true: it has 3 valence electrons and accepts one from the valence band. Level just above Ev: true: about 0.045 eV for B in Si, so it is filled at room temperature, leaving a hole behind. Positive ion: false. An acceptor that has taken an extra electron is negatively charged. Below Ei: true.

    Why people get this wrong: The ion charge is opposite to the free carrier: donors leave positive ions, acceptors negative ones.

  15. MCQStandard

    Electrons in silicon have mobility 1350 cm2/V s at 300 K. Their diffusion coefficient is about
    1. 5.2×104 cm2/s
    2. 35 cm2/s
    3. 1350 cm2/s
    4. 0.035 cm2/s
    Answer and solution

    Answer: B

    Einstein relation: D=μkTe=1350×0.02585=34.9 cm2/s. The thermal voltage kT/e=25.85 mV links how easily carriers drift to how fast they spread out.

    Why people get this wrong: 5.2×104 cm2/s comes from dividing by kT/e instead of multiplying; 0.035 comes from converting 25.85 mV with 10−6 instead of 10−3.

  16. MCQStandard

    A semiconductor sample gives a negative Hall coefficient. This shows that
    1. the majority carriers are holes
    2. the sample is intrinsic
    3. the majority carriers are electrons
    4. the magnetic field was reversed
    Answer and solution

    Answer: C

    For one carrier type RH=1/(nq), with q=−e for electrons and +e for holes. A negative RH means negative carriers dominate: n-type.

    Why people get this wrong: Intrinsic samples usually also give negative RH (electrons are more mobile), but a negative sign alone cannot prove the sample is intrinsic.

  17. MCQStandard

    Silicon contains 5×1016 cm−3 donors and 2×1016 cm−3 acceptors, all ionised. At room temperature it is
    1. n-type with n≈3×1016 cm−3
    2. n-type with n≈5×1016 cm−3
    3. p-type with p≈2×1016 cm−3
    4. intrinsic, because the dopants cancel
    Answer and solution

    Answer: A

    The acceptors capture 2×1016 of the donor electrons. Charge neutrality n+Na=p+Nd with p negligible gives n=Nd−Na=3×1016 cm−3. The material is compensated n-type. (Its mobility is lower than for 3×1016 donors alone, because all 7×1016 ions scatter carriers.)

    Why people get this wrong: Ignoring the acceptors, or thinking any amount of acceptors cancels the donors completely.

  18. NATStandard

    Electrons in a semiconductor have mobility 1400 cm2/V s and conductivity effective mass 0.26me. Their mean time between scattering events is ______ ps (to three decimal places).
    Answer and solution

    Answer: 0.207 ps (±0.003)

    From the Drude picture μ=eτ/m∗, so τ=μm∗e=(0.140 m2/V s)(0.26×9.11×10−31 kg)1.60×10−19 C=2.07×10−13 s =0.207 ps.

    Why people get this wrong: Leaving the mobility in cm2/V s gives an answer 104 times too big; use 1 cm2=10−4 m2.

  19. MCQStandard

    In a non-degenerate n-type semiconductor at 300 K, the donor density (all ionised, much larger than ni) is multiplied by 10. The Fermi level
    1. moves down by about 60 meV
    2. moves up by about 26 meV
    3. moves up by about 0.6 eV
    4. moves up by about 60 meV
    Answer and solution

    Answer: D

    n=Nce−(Ec−EF)/kT≈Nd, so Ec−EF=kTln⁡(Nc/Nd). Multiplying Nd by 10 lowers Ec−EF by kTln⁡10=0.02585×2.303=0.0595 eV: the Fermi level rises about 60 meV towards the conduction band.

    Why people get this wrong: Using kT itself (26 meV): a factor e, not 10, moves it by kT.

  20. NATExam level

    Silicon (ni=1.0×1010 cm−3) is doped with 1017 donors per cm3. At 300 K (kT=0.02585 eV) its Fermi level lies above the intrinsic level by ______ eV (to three decimal places).
    Answer and solution

    Answer: 0.417 eV (±0.003)

    n=nie(EF−Ei)/kT, so EF−Ei=kTln⁡(n/ni)=0.02585×ln⁡(107)=0.02585×16.12=0.417 eV. With Eg=1.12 eV, mid-gap to band edge is 0.56 eV, so EF sits about 0.14 eV below Ec.

    Why people get this wrong: Using log10⁡ (gives 0.181 eV): the formula needs the natural log.

  21. NATExam level

    n-type silicon has 1016 donors per cm3 (all ionised) and electron mobility 1200 cm2/V s. Its resistivity is ______ Ω cm (to three decimal places). Ignore the holes.
    Answer and solution

    Answer: 0.52 Ω cm (±0.005)

    ρ=1enμn=11.602×10−19×1016×1200=11.922=0.520 Ω cm. Compare intrinsic Si at about 3×105 Ω cm: one donor per five million atoms lowers the resistivity almost a million times.

    Why people get this wrong: Mixing cm and m: with n in cm−3 and μ in cm2/V s the answer comes out in Ω cm.

  22. NATExam level

    For silicon (Eg=1.12 eV, taken constant) with ni∝T3/2e−Eg/2kT, the ratio ni(310 K)/ni(300 K) is ______ (to two decimal places). Take k=8.617×10−5 eV/K.
    Answer and solution

    Answer: 2.11 (±0.02)

    ni(310)ni(300)=(310300)3/2exp⁡[Eg2k(1300−1310)]. Eg2k=6499 K and 1300−1310=1.075×10−4 K−1, so the exponential is e0.699=2.01; times 1.050 gives 2.11. A 10 K rise doubles ni, the reason electronics drift with temperature.

    Why people get this wrong: Dropping the factor 2 in Eg/2kT gives a ratio of about 4.2.

  23. MCQExam level

    In an intrinsic semiconductor where the hole effective mass is larger than the electron effective mass, the Fermi level at T>0
    1. lies exactly at mid-gap at all temperatures
    2. lies slightly above mid-gap and moves up as T rises
    3. lies slightly below mid-gap and moves down as T rises
    4. lies at the valence band edge
    Answer and solution

    Answer: B

    Ei=Ec+Ev2+34kTln⁡mh∗me∗. With mh∗>me∗ the log is positive: Ei is above mid-gap, by an amount proportional to T. Heavier holes mean more valence states near the edge, so the Fermi level must move away from them to keep n=p.

    Why people get this wrong: Guessing the shift is towards the band with the heavier carriers; it is away from it.

  24. MSQExam level

    For an n-type semiconductor with donor density Nd, ln⁡n is plotted against 1/T. Which statements are correct?
    1. At very low temperature (freeze-out), n rises with T as donors ionise.
    2. In a middle range, n≈Nd and hardly changes with T.
    3. At high temperature the material is intrinsic and the slope of ln⁡n against 1/T is −Eg/2k.
    4. The slope in the freeze-out region gives the band gap.
    Answer and solution

    Answer: A, B, C

    Freeze-out: true: electrons are still bound to donors and kT is too small to free them all. Saturation: true: all donors are ionised and ni≪Nd (the useful range for devices). Intrinsic: true: n≈ni∝e−Eg/2kT. Freeze-out slope: false. It gives the donor ionisation energy (−Ed/2k for low compensation), a few tens of meV, not the gap.

    Why people get this wrong: Reading every straight segment of an Arrhenius plot as the band gap.

  25. NATExam level

    A semiconductor with one dominant carrier type has Hall coefficient RH=−5.0×10−4 m3/C. The carrier density is ______ ×1022 m−3 (to two decimal places).
    Answer and solution

    Answer: 1.25 ×10²² m⁻³ (±0.01)

    |RH|=1ne, so n=1e|RH|=11.602×10−19×5.0×10−4=1.25×1022 m−3 =1.25×1016 cm−3. The minus sign says the carriers are electrons.

    Why people get this wrong: Giving the answer in cm−3 when the data are in SI units.

  26. NATExam level

    In a semiconductor with relative permittivity 12 and electron effective mass 0.20me, the hydrogen-like model gives a donor ionisation energy of ______ meV (to one decimal place). Take the hydrogen ground-state energy as 13.6 eV.
    Answer and solution

    Answer: 18.9 meV (±0.2)

    The extra electron orbits the donor ion like hydrogen, but in a medium of permittivity εr with mass m∗: Ed=13.6 eV×m∗/meεr2=13.6×0.20144=0.0189 eV =18.9 meV, below kT at room temperature, so donors are ionised.

    Why people get this wrong: Dividing by εr instead of εr2 (the energy goes as e4/ε2).

  27. MCQExam level

    Near a band edge E(k) is a parabola. Compared with a band of small curvature d2E/dk2, a band of large curvature has electrons with
    1. a larger effective mass
    2. the same effective mass, since it is a property of the electron
    3. a negative effective mass
    4. a smaller effective mass
    Answer and solution

    Answer: D

    m∗=ℏ2d2E/dk2. A sharply curved band (energy rising fast with k) gives a small m∗, so the electrons respond quickly to a field and have high mobility. A flat band means heavy carriers.

    Why people get this wrong: Confusing curvature with the slope: the slope dE/dk gives the group velocity, the curvature gives the mass.

  28. MSQExam level

    Which statements about the Fermi-Dirac function f(E) are correct?
    1. f(EF+Δ)+f(EF−Δ)=1 for any Δ.
    2. At T=0 it is a step: 1 below EF and 0 above.
    3. For E−EF≫kT it is close to e−(E−EF)/kT.
    4. At higher temperature the step is smeared over a few kT on each side of EF.
    Answer and solution

    Answer: A, B, C, D

    Symmetry: 1ex+1+1e−x+1=1ex+1+ex1+ex=1: the chance of a state Δ above being full equals the chance of a state Δ below being empty. Step at T=0: true. Boltzmann tail: true, since ex≫1. Smearing: true: f changes from 0.9 to 0.1 over about 4.4kT. All four hold.

    Why people get this wrong: Students often hunt for a false statement. Sometimes there is none.

  29. MCQExam level

    Electrons with mobility 1400 cm2/V s cross a 50 μm long silicon channel with 1 V across it. The transit time is about
    1. 1.8 ns
    2. 36 ns
    3. 0.18 ns
    4. 17.9 ns
    Answer and solution

    Answer: D

    Field E=1 V/(50×10−4 cm)=200 V/cm. Drift velocity v=μE=1400×200=2.8×105 cm/s. Time t=L/v=50×10−4/2.8×105=1.79×10−8 s =17.9 ns.

    Why people get this wrong: Mixing μm and cm, which moves the answer by powers of ten.

  30. MCQExam level

    Minority holes in an n-type sample have diffusion coefficient 10 cm2/s and lifetime 1 μs. Their diffusion length is about
    1. 32 μm
    2. 10 μm
    3. 3.2 μm
    4. 100 μm
    Answer and solution

    Answer: A

    L=Dτ=10×10−6 cm =10−5 cm =3.16×10−3 cm =31.6 μm: the average distance a hole diffuses before it recombines.

    Why people get this wrong: Using L=Dτ instead of its square root.

← All topics · Timed mock test →