Tensors

Mathematical methods · 12 questions and templates for IIT JAM Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    In three dimensions, with the summation convention, δii equals
    1. 1
    2. 0
    3. 3
    4. 9
    Answer and solution

    Answer: C

    A repeated index is summed: δii=δ11+δ22+δ33=3. In n dimensions it is n (the trace of the identity).

    Why people get this wrong: Reading δii as a single component equal to 1.

  2. MCQWarm-up

    Given ε123=1, the value of ε213 is
    1. 1
    2. −1
    3. 0
    4. 2
    Answer and solution

    Answer: B

    213 comes from 123 by one swap (of the first two indices), an odd permutation, so ε213=−1. It is 0 whenever two indices are equal.

    Why people get this wrong: Thinking any rearrangement gives +1: only even (cyclic) ones do.

  3. MCQWarm-up

    A general (not symmetric) rank-2 tensor in three dimensions has how many components?
    1. 6
    2. 9
    3. 3
    4. 27
    Answer and solution

    Answer: B

    Each of the two indices takes 3 values: 32=9 components Tij. (Symmetry would cut this to 6; rank 3 would give 27.)

    Why people get this wrong: 6 is the count for a SYMMETRIC rank-2 tensor.

  4. MCQStandard

    In index notation, the ith component of 𝐀×𝐁 is
    1. εijkAjBk
    2. δijAjBi
    3. εijkAiBj
    4. AjBk−AkBj summed over j and k
    Answer and solution

    Answer: A

    Check i=1: ε123A2B3+ε132A3B2=A2B3−A3B2 ✓. The third option has free index k, not i. The last, summed over both, gives 0.

    Why people get this wrong: The free index must be the one in the result.

  5. MCQStandard

    With the summation convention, δijAj equals
    1. Ai
    2. 3Ai
    3. Ajδii
    4. AiAj
    Answer and solution

    Answer: A

    The sum over j has only one non-zero term, j=i, where δii (no sum) is 1. So δijAj=Ai: the Kronecker delta renames an index.

    Why people get this wrong: δii with the sum is 3, but here i is a free index and is not summed.

  6. NATStandard

    Tij=AiBj with 𝐀=(1,2,3) and 𝐁=(1,0,−1). The trace Tii (summed) is ______.
    Answer and solution

    Answer: -2

    Tii=AiBi=𝐀⋅𝐁=1+0−3=−2. Contracting the two indices of an outer product gives the dot product.

    Why people get this wrong: Adding all nine components AiBj gives (∑A)(∑B)=0, not the trace.

  7. MCQExam level

    Sij is symmetric and Aij is antisymmetric (3D, summation convention). The full contraction SijAij is
    1. always positive
    2. always negative
    3. impossible to find without the components
    4. 0
    Answer and solution

    Answer: D

    Rename the dummy indices i↔j: SijAij=SjiAji=(Sij)(−Aij)=−SijAij. A number equal to its own negative is 0.

    Why people get this wrong: Renaming summed indices is always allowed; it is the key step, not a trick.

  8. NATExam level

    For σ=(210131011), the second invariant I2=12[(σii)2−σijσij] is ______.
    Answer and solution

    Answer: 9

    σii=2+3+1=6. σijσij is the sum of the squares of all entries: 4+1+0+1+9+1+0+1+1=18. So I2=12(36−18)=9. It equals the sum of the principal 2×2 minors: (6−1)+(2−0)+(3−1)=9, and is unchanged by rotations.

    Why people get this wrong: Squaring only the diagonal entries for σijσij (giving 14) forgets the off-diagonal terms, which each appear twice.

  9. MSQExam level

    Under spatial inversion (𝐫→−𝐫, t unchanged), which statements are true?
    1. 𝐄⋅𝐁 is a pseudoscalar
    2. 𝐁 is an axial (pseudo) vector
    3. 𝐫×𝐁 is an axial vector
    4. |𝐁|2 is a true scalar
    Answer and solution

    Answer: A, B, D

    𝐄 flips sign (polar vector: it is a force per charge). 𝐁 does not flip: 𝐅=q𝐯×𝐁 with 𝐅, 𝐯 both flipping requires it, so 𝐁 is axial. Then 𝐄⋅𝐁 flips: a pseudoscalar. 𝐫×𝐁 flips (polar × axial), so it is a POLAR vector. |𝐁|2 is unchanged: a true scalar.

    Why people get this wrong: A cross product is not automatically axial: axial × polar is polar.

  10. NATExam level

    A 2D tensor has components T=(1234). The axes are rotated by +90∘, so that x1′=x2 and x2′=−x1. The new component T12′ is ______.
    Answer and solution

    Answer: -3

    Tij′=RikRjlTkl with R=(01−10) (rows give the new axes in old components). T12′=R1kR2lTkl; only R12=1 and R21=−1 are non-zero, so T12′=(1)(−1)T21=−3. In matrix form T′=RTR𝖳=(4−3−21).

    Why people get this wrong: Transforming only one index (as for a vector) gives a wrong component; each index gets its own R.

← All topics · Timed mock test →