Alternating current
Class 12 · 238 questions and templates for Medical entrance (NEET), in order from warm-up to top rank. Check each answer, then read the full solution.
New to this topic? Read the lesson first: Alternating current.
Loading questions… (they need JavaScript; nothing you type is sent anywhere)
Written questions with solutions
The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.
-
MCQWarm-up
The rms value of an alternating current isAnswer and solution
Answer: B
The rms value is the steady current that gives the same heating as the AC. Averaging over a cycle gives , so . is the mean over half a cycle. -
NATWarm-up
The rms value of the mains voltage is 230 V. Find its peak value (in V, nearest whole number).Answer and solution
Answer: 325 V (±1)
V. -
MCQWarm-up
The average value of a sinusoidal alternating current over one full cycle is- zero
Answer and solution
Answer: A
The positive half cycle cancels the negative half cycle exactly, so the mean over a full cycle is zero. This is why we use the rms value, which does not cancel. -
MCQWarm-up
The reading of an AC ammeter or voltmeter in a house circuit is the- peak value
- average value over a full cycle
- peak-to-peak value
- rms value
Answer and solution
Answer: D
AC meters are calibrated to show the rms value, because that is what decides heating and power. The mains "230 V" is an rms value. -
NATWarm-up
Mains supply has a frequency of 50 Hz. Find its time period (in ms).Answer and solution
Answer: 20 ms
s ms. -
MCQWarm-up
The SI unit of inductive reactance is- henry
- farad
- ohm
- ohm per metre
Answer and solution
Answer: C
Reactance is a voltage-to-current ratio, so it is measured in ohm, like resistance. Henry is the unit of inductance and farad of capacitance. -
NATWarm-up
Find the inductive reactance of a 0.2 H inductor at 50 Hz (in , 1 decimal).Answer and solution
Answer: 62.8 Ω (±0.1)
. -
NATWarm-up
Find the capacitive reactance of a 50 F capacitor at 50 Hz (in , 1 decimal).Answer and solution
Answer: 63.7 Ω (±0.1)
.Why people get this wrong: Convert microfarad to farad: 50 μF = 50 × 10^-6 F.
-
MCQWarm-up
In a purely inductive AC circuit, the current- leads the voltage by
- lags the voltage by
- is in phase with the voltage
- lags the voltage by
Answer and solution
Answer: B
The inductor's emf opposes any change of current, so the current reaches its peak a quarter cycle after the voltage. Remember: in an inductor the voltage leads (ELI the ICE man: before in L). -
MCQWarm-up
In a purely capacitive AC circuit, the current- leads the voltage by
- lags the voltage by
- is in phase with the voltage
- is zero all the time
Answer and solution
Answer: A
The current is . It is maximum when the voltage is changing fastest, which is when the voltage is zero: a quarter cycle before the voltage peak. In a capacitor, current leads (ICE). -
MCQWarm-up
In an AC circuit with only a resistor, the phase difference between voltage and current is- zero
Answer and solution
Answer: D
By Ohm's law at every instant, so the two rise and fall together: they are in phase. -
MCQWarm-up
The resonant frequency of a series LCR circuit isAnswer and solution
Answer: C
At resonance , so and , giving . -
NATWarm-up
A series LCR circuit has mH and F. Find its resonant frequency (in Hz, nearest whole number).Answer and solution
Answer: 503 Hz (±1)
. , s. Hz. -
MCQWarm-up
A step-up transformer has- more turns in the primary than in the secondary
- more turns in the secondary than in the primary
- an equal number of turns in both coils
- a permanent magnet as its core
Answer and solution
Answer: B
. To raise the voltage, the secondary needs more turns. A step-up transformer lowers the current in the same ratio. -
NATWarm-up
A transformer has 1000 turns in its primary and 100 turns in its secondary. The primary is connected to a 220 V AC supply. Find the secondary voltage (in V).Answer and solution
Answer: 22 V
V. It is a step-down transformer. -
MCQWarm-up
A capacitor is connected to a steady DC source in series with a lamp. After the capacitor has charged, the lamp- does not glow
- glows steadily
- glows brighter and brighter
- flickers
Answer and solution
Answer: A
For DC, and : a capacitor blocks steady current once it is charged. It passes AC. -
NATWarm-up
A series circuit has a resistance of and a net reactance of . Find its impedance (in ).Answer and solution
Answer: 50 Ω
.Why people get this wrong: Resistance and reactance add at right angles, not directly.
-
MCQWarm-up
The average power consumed by an ideal inductor connected to an AC source over a full cycle is- zero
Answer and solution
Answer: D
Energy goes into the magnetic field in one quarter cycle and comes back in the next. Here , so and . -
MCQWarm-up
Electric power is sent over long distances at very high voltage mainly because- the resistance of wire falls at high voltage
- high voltage travels faster in the wire
- the current is then small and the loss in the wires is small
- transformers work only at high voltage
Answer and solution
Answer: C
For a given power , a higher means a smaller . The loss in the wires is , so doubling the voltage cuts the loss to a quarter. -
NATWarm-up
The current in a circuit is ampere. Find its rms value (in A, 2 decimals).Answer and solution
Answer: 2.83 A (±0.01)
The peak value is A, so A. (The 314 is , giving Hz.) -
MCQWarm-up
A transformer will not work with a DC supply because- DC has too low a voltage
- a steady current gives a constant flux and no emf in the secondary
- DC cannot flow in a coil
- the core would melt at once
Answer and solution
Answer: B
Induction needs a changing flux. A steady DC produces a constant flux, so and no emf is induced in the secondary. -
NATStandard
A voltage is volt. Find its frequency (in Hz).Answer and solution
Answer: 50 Hz
Compare with : , so Hz. -
NATStandard
A voltage is volt. Find its rms value (in V).Answer and solution
Answer: 200 V
The peak value is V, so V. -
NATStandard
A 50 Hz current starts from zero at . How long does it take to reach its rms value for the first time (in ms, 1 decimal)?Answer and solution
Answer: 2.5 ms (±0.05)
gives , so ms.Why people get this wrong: The rms value is reached at 45 degrees of phase, not 90.
-
NATStandard
A heater of resistance is connected to a 220 V rms supply. Find the average power it consumes (in W).Answer and solution
Answer: 880 W
W. The current is A rms. -
NATStandard
A coil of resistance and inductive reactance at 50 Hz is connected to 220 V, 50 Hz mains. Find the rms current (in A, 1 decimal).Answer and solution
Answer: 4.4 A (±0.05)
. A. -
NATStandard
For the same coil (, ), find the angle by which the current lags the applied voltage (in degrees, 1 decimal).Answer and solution
Answer: 53.1 ° (±0.1)
, so . The current lags the voltage by this angle. -
NATStandard
For the same coil on 220 V mains (current 4.4 A), find the average power consumed (in W, nearest whole number).Answer and solution
Answer: 581 W (±1)
Only the resistance dissipates power: W. Check: W. -
NATStandard
A resistor is in series with a capacitor of reactance across a 100 V rms supply. Find the rms current (in A).Answer and solution
Answer: 1 A (±0.005)
and A. The current leads the voltage with . -
NATStandard
A 100 F capacitor is connected to a 220 V, 50 Hz supply. Find the rms current (in A, 2 decimals).Answer and solution
Answer: 6.91 A (±0.01)
A.