Chemical kinetics
Class 12 · 173 questions and templates for Medical entrance (NEET), in order from warm-up to top rank. Check each answer, then read the full solution.
New to this topic? Read the lesson first: Chemical kinetics.
Loading questions… (they need JavaScript; nothing you type is sent anywhere)
Written questions with solutions
The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.
-
MCQWarm-up
The rate of a chemical reaction is best defined as- the change in concentration of a reactant or product per unit time
- the total amount of product formed at the end
- the time taken for the reaction to start
- the energy released per mole of reactant
Answer and solution
Answer: A
Rate = -Δ[reactant]/Δt = +Δ[product]/Δt. It tells how fast concentration changes, not how much product finally forms (that is yield) nor energy (that is enthalpy).
-
MCQWarm-up
The usual unit of the rate of a reaction in solution is- s-1
- mol L-1 s-1
- L mol-1 s-1
- mol s
Answer and solution
Answer: B
Rate is concentration (mol L-1) divided by time (s), so mol L-1 s-1. The other units belong to rate constants of first and second order reactions.
-
MCQWarm-up
For the rate law rate = k[A]2[B], the overall order of the reaction is- 2
- 1
- 3
- 4
Answer and solution
Answer: C
Overall order is the sum of the powers of the concentrations in the rate law: 2 + 1 = 3. The order is read from the rate law, not from the balanced equation.
-
MCQWarm-up
Molecularity of an elementary reaction- can be zero
- can be a fraction such as 1/2
- is always equal to the sum of the stoichiometric coefficients of the overall reaction
- is always a whole number, never zero or fractional
Answer and solution
Answer: D
Molecularity is the number of reacting species colliding in one elementary step: 1, 2 or (rarely) 3. It is a whole number. It applies to a single step, not to a multi-step reaction as a whole.
-
MCQWarm-up
The unit of the rate constant of a first order reaction is- s-1
- mol L-1 s-1
- L mol-1 s-1
- mol2 L-2 s-1
Answer and solution
Answer: A
For first order, rate = k[A], so k = rate/[A] = (mol L-1 s-1)/(mol L-1) = s-1.
-
NATWarm-up
A first order reaction has k = 0.0693 min-1. Find its half-life in minutes. (ln 2 = 0.693)Answer and solution
Answer: 10 min
For first order, t1/2 = 0.693/k = 0.693/0.0693 = 10 min.
-
NATWarm-up
The rate law of a reaction is rate = k[A][B]2. What is the overall order?Answer and solution
Answer: 3
Add the powers: 1 + 2 = 3.
-
MCQWarm-up
The Arrhenius equation is- k = A eEa/RT
- k = A e-Ea/RT
- k = A e-RT/Ea
- k = Ea e-A/RT
Answer and solution
Answer: B
k = A e-Ea/RT, where A is the frequency (pre-exponential) factor. The negative sign means higher activation energy gives a smaller k, and higher T gives a larger k.
-
MCQWarm-up
A catalyst increases the rate of a reaction by- increasing the temperature of the system
- increasing the enthalpy change of the reaction
- providing a path with lower activation energy
- shifting the equilibrium towards the products
Answer and solution
Answer: C
A catalyst offers an alternative route with a lower Ea, so more molecules cross the barrier. It does not change ΔH or the equilibrium constant, and it is not used up.
-
MCQWarm-up
For a zero order reaction, the half-life- is independent of the initial concentration
- is inversely proportional to the initial concentration
- is proportional to the square of the initial concentration
- is directly proportional to the initial concentration
Answer and solution
Answer: D
For zero order t1/2 = [A]0/(2k). More starting material takes longer to be halved at a constant rate.
-
MCQWarm-up
For most reactions near room temperature, a 10 K rise in temperature makes the rate about- two to three times larger
- ten times larger
- half as large
- unchanged
Answer and solution
Answer: A
The temperature coefficient (rate at T + 10 over rate at T) is typically 2 to 3, as described in the Arrhenius equation. This is a rule of thumb, not an exact law.
-
MCQWarm-up
According to collision theory, a collision leads to reaction only if the molecules have- equal speeds and equal masses
- energy at least equal to the threshold energy and the proper orientation
- proper orientation only
- energy equal to the activation energy of the reverse reaction
Answer and solution
Answer: B
Effective collisions need (i) enough energy (at least the threshold energy) and (ii) the right orientation. Most collisions fail one or both tests.
-
MCQWarm-up
Radioactive decay follows- zero order kinetics
- second order kinetics
- first order kinetics
- no fixed order
Answer and solution
Answer: C
The decay rate is proportional to the number of undecayed nuclei, -dN/dt = λN, which is the first order law. That is why every radioactive nuclide has a fixed half-life.
-
NATWarm-up
For 2A → B, the rate of disappearance of A is 0.04 mol L-1 s-1. Find the rate of reaction, defined as -½ d[A]/dt, in mol L-1 s-1.Answer and solution
Answer: 0.02 mol L<sup>-1</sup> s<sup>-1</sup> (±0.001)
Rate of reaction = -(1/2) d[A]/dt = 0.04/2 = 0.02. Dividing by the stoichiometric coefficient gives one common rate.
-
MCQWarm-up
In a multi-step reaction the overall rate is controlled by- the fastest step
- the last step
- the step with the most reactants
- the slowest step
Answer and solution
Answer: D
Like the narrowest part of a pipe, the slowest elementary step (the rate-determining step) sets the overall rate.
-
MCQWarm-up
The unit of the rate constant of a zero order reaction is- mol L-1 s-1
- s-1
- L mol-1 s-1
- it has no unit
Answer and solution
Answer: A
For zero order, rate = k, so k has the same unit as rate: mol L-1 s-1.
-
NATStandard
A first order reaction has a half-life of 20 min. Find the rate constant in min-1.Answer and solution
Answer: 0.0347 min<sup>-1</sup> (±0.0005)
k = 0.693/t1/2 = 0.693/20 = 0.0347 min-1.
-
NATStandard
The half-life of a first order reaction is 10 min. How long does it take for 75 % of the reactant to be consumed?Answer and solution
Answer: 20 min
75 % consumed leaves 25 % = 1/4, which is two half-lives.
t = 2 × 10 = 20 min.
-
NATStandard
In a first order reaction 20 % of the reactant decomposes in 10 min. Find k in min-1. (log 1.25 = 0.0969)Answer and solution
Answer: 0.0223 min<sup>-1</sup> (±0.0005)
[A]0 = 100, [A] = 80. k = (2.303/t) log([A]0/[A]) = (2.303/10) log(100/80).
= 0.2303 × 0.0969 = 0.0223 min-1.
Why people get this wrong: Use the amount left (80), not the amount reacted (20).
-
NATStandard
For a zero order reaction [A]0 = 0.80 M and k = 0.020 mol L-1 s-1. Find the half-life in seconds.Answer and solution
Answer: 20 s
For zero order t1/2 = [A]0/(2k) = 0.80/(2 × 0.020) = 20 s.
Why people get this wrong: Do not use 0.693/k here.
-
NATStandard
In an experiment, doubling [A] doubles the rate and doubling [B] quadruples the rate. What is the overall order of the reaction?Answer and solution
Answer: 3
Rate ∝ [A]1 since 21 = 2. Rate ∝ [B]2 since 22 = 4.
Overall order = 1 + 2 = 3.
-
NATStandard
A second order reaction (one reactant) has k = 0.50 L mol-1 s-1 and [A]0 = 0.20 M. Find t1/2 in seconds.Answer and solution
Answer: 10 s
For second order t1/2 = 1/(k[A]0) = 1/(0.50 × 0.20) = 10 s.
-
NATStandard
The slope of a plot of ln k versus 1/T is -6000 K. Find the activation energy in kJ/mol (R = 8.314 J mol-1 K-1).Answer and solution
Answer: 49.9 kJ/mol (±0.2)
Slope = -Ea/R, so Ea = 6000 × 8.314 = 49884 J = 49.9 kJ/mol.
Why people get this wrong: The slope is -Ea/R for ln k; for log10 k it is -Ea/2.303R.
-
NATStandard
The rate law is rate = k[A]2. By what factor does the rate change if [A] is tripled?Answer and solution
Answer: 9
Rate ∝ [A]2, so tripling [A] multiplies the rate by 32 = 9.
-
NATStandard
For the gas phase reaction 2A + B → products with rate = k[A]2[B], the volume of the container is suddenly halved. By what factor does the rate change?Answer and solution
Answer: 8
Halving the volume doubles every concentration. Rate ∝ [A]2[B]: 22 × 2 = 8.
Why people get this wrong: Both concentrations double, not just one.
-
MCQStandard
For a first order reaction A → products, a straight line is obtained by plotting- [A] against t, with slope -k
- ln[A] against t, with slope -k
- 1/[A] against t, with slope k
- ln[A] against 1/t, with slope k
Answer and solution
Answer: B
First order: ln[A] = ln[A]0 - kt, a straight line with slope -k. A plot of [A] against t is a decaying curve; 1/[A] against t is the straight line for second order.
-
MCQStandard
For a second order reaction (rate = k[A]2), the straight-line plot is- ln[A] against t
- [A] against t
- 1/[A] against t, with positive slope k
- 1/[A]2 against t
Answer and solution
Answer: C
Integrated second order law: 1/[A] = 1/[A]0 + kt. So 1/[A] rises linearly with t, and the slope is +k.
-
MCQStandard
For a zero order reaction, the concentration of reactant plotted against time gives- an exponential decay curve
- a horizontal line
- a hyperbola
- a straight line with negative slope equal to -k
Answer and solution
Answer: D
Zero order: [A] = [A]0 - kt, which is a straight line with slope -k. It runs out of reactant in time [A]0/k.
-
NATStandard
A radioactive sample of 64 g has a half-life of 6 h. What mass remains after 24 h?Answer and solution
Answer: 4 g
24 h = 4 half-lives. Mass = 64 × (1/2)4 = 64/16 = 4 g.
-
MCQStandard
For an elementary reaction step, which statement is correct?- The order equals the molecularity
- The order is always zero
- The order is always one more than the molecularity
- Molecularity can be fractional but order cannot
Answer and solution
Answer: A
An elementary step happens exactly as written, so its rate law follows from its coefficients: a bimolecular step 2A → P is second order. For a complex reaction the order is found by experiment and can differ from molecularity.