d- and f-block elements
Class 12 · 306 questions and templates for Medical entrance (NEET), in order from warm-up to top rank. Check each answer, then read the full solution.
New to this topic? Read the lesson first: d- and f-block elements.
Loading questions… (they need JavaScript; nothing you type is sent anywhere)
Written questions with solutions
The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.
-
NATWarm-up
Find the oxidation state of Ti in TiO2.Answer and solution
Answer: 4
Set the sum of oxidation states to the overall charge: x + 2(-2) = 0.
So the oxidation state of Ti is +4.
-
MCQWarm-up
The ground-state electronic configuration of chromium (Z = 24) is- [Ar] 3d5 4s1
- [Ar] 3d4 4s2
- [Ar] 3d6
- [Ar] 4s2 4p4
Answer and solution
Answer: A
Chromium is an exception: moving one 4s electron into 3d gives a half-filled 3d5 subshell, which is extra stable because of exchange energy and symmetry. The regular 3d44s2 is therefore not the ground state.
-
MCQWarm-up
Copper (Z = 29) has the configuration- [Ar] 3d9 4s2
- [Ar] 3d10 4s1
- [Ar] 3d8 4s2 4p1
- [Ar] 3d10
Answer and solution
Answer: B
A completely filled 3d10 subshell is more stable, so one 4s electron moves into 3d. This is the second exception in the 3d series (the first is Cr).
-
MCQWarm-up
The general outer electronic configuration of d-block elements is- (n-2)f1-14 (n-1)d0-1 ns2
- ns2 np1-6
- (n-1)d1-10 ns1-2
- (n-1)d1-10 ns2 only
Answer and solution
Answer: C
d-block: (n-1)d1-10 ns1-2 (Pd is 4d105s0 as an exception). The second option is the f-block. "ns2 only" fails for Cr and Cu.
-
MCQWarm-up
Which of the following is NOT considered a transition element by the IUPAC definition?- Fe
- Cu
- Ni
- Zn
Answer and solution
Answer: D
A transition element has a partly filled d subshell in the atom or in at least one common ion. Zn (3d104s2) and Zn2+ (3d10) both have full d subshells. Cu2+ is d9, so copper qualifies.
-
MCQWarm-up
In the inner transition elements the last electron enters the- (n-2)f subshell
- (n-1)d subshell
- ns subshell
- np subshell
Answer and solution
Answer: A
Lanthanoids fill 4f; actinoids fill 5f. These are the inner transition (f-block) elements.
-
MCQWarm-up
Across the 3d series from Sc to Zn the atomic radii- first decrease, then stay nearly constant, and increase slightly at the end
- increase steadily
- decrease steadily
- remain exactly constant
Answer and solution
Answer: A
Nuclear charge rises, but extra electrons enter the inner 3d subshell and shield the 4s electrons. In the middle the two effects balance (radii nearly constant). At Cu and Zn, d-d repulsion in the filled d subshell expands the atom slightly.
-
MCQWarm-up
The most common oxidation state of the 3d metals (excluding Sc) is- +1
- +2
- +3
- +7
Answer and solution
Answer: B
The two 4s electrons are lost most easily, giving +2. Scandium is +3 and Zn is +2 only.
-
MCQWarm-up
A substance that is attracted by a magnetic field because of unpaired electrons is called- paramagnetic
- diamagnetic
- ferrimagnetic only
- non-magnetic
Answer and solution
Answer: A
Unpaired electrons give permanent magnetic moments, so the substance is drawn into the field: paramagnetic. Diamagnetic substances (all electrons paired) are weakly repelled.
-
MCQWarm-up
The starting material for the preparation of potassium permanganate is- haematite, Fe2O3
- chromite, FeCr2O4
- cinnabar, HgS
- pyrolusite, MnO2
Answer and solution
Answer: D
MnO2 is fused with KOH in air (or with KNO3) to give green K2MnO4, which is then oxidised to KMnO4.
-
MCQWarm-up
Potassium dichromate is prepared from the ore- pyrolusite, MnO2
- chromite, FeCr2O4
- bauxite, Al2O3
- galena, PbS
Answer and solution
Answer: B
Chromite is fused with sodium carbonate in excess air to give sodium chromate, which is acidified to sodium dichromate and then converted to potassium dichromate.
-
MCQWarm-up
The lanthanoids are the elements with atomic numbers- 89 to 103
- 21 to 30
- 39 to 48
- 58 to 71, following lanthanum
Answer and solution
Answer: D
Ce (58) to Lu (71) fill the 4f subshell. Actinoids are 90 to 103.
-
MCQWarm-up
The actinoids are the elements from- Ce (58) to Lu (71)
- Th (90) to Lr (103), in which the 5f subshell is filled
- Sc (21) to Zn (30)
- Y (39) to Cd (48)
Answer and solution
Answer: B
Actinium (89) starts the series; Th to Lr fill 5f. All actinoids are radioactive.
-
MCQWarm-up
Iron, copper and zinc all belong to the- s-block
- p-block
- d-block
- f-block
Answer and solution
Answer: C
Elements whose last electron enters a d subshell form the d-block (groups 3 to 12). Zn is in the d-block but is not a transition element.
-
MCQWarm-up
The colour of an aqueous solution of potassium permanganate is- orange
- green
- colourless
- purple
Answer and solution
Answer: D
MnO4- is intensely purple. Dichromate is orange, manganate is green, and Mn2+ is almost colourless.
-
MCQWarm-up
Aqueous potassium dichromate in acid is- orange
- yellow
- purple
- blue
Answer and solution
Answer: A
Cr2O72- is orange. Chromate CrO42- (alkaline) is yellow.
-
MCQWarm-up
Which of these is a lanthanoid?- uranium (U)
- cerium (Ce)
- iron (Fe)
- copper (Cu)
Answer and solution
Answer: B
Ce (Z = 58) is a lanthanoid. U is an actinoid; Fe and Cu are d-block elements.
-
MCQWarm-up
Which of these is an actinoid?- cerium (Ce)
- lanthanum (La)
- uranium (U)
- lutetium (Lu)
Answer and solution
Answer: C
U (Z = 92) fills the 5f subshell and is an actinoid. Ce and Lu are lanthanoids; La is the element that heads the lanthanoid series.
-
MCQWarm-up
Which d-block metal is a liquid at room temperature?- zinc
- cadmium
- copper
- mercury
Answer and solution
Answer: D
Mercury (melting point -39 °C) is liquid, because its filled d10s2 shell gives very weak metallic bonding.
-
MCQWarm-up
The catalyst used in the manufacture of ammonia by the Haber process is- finely divided iron
- platinum gauze
- V2O5
- nickel
Answer and solution
Answer: A
Haber: N2 + 3H2 → 2NH3 over iron (with promoters such as Mo or K2O).
-
MCQWarm-up
Which one of these is NOT a member of the 3d series?- V
- Ca
- Fe
- Ni
Answer and solution
Answer: B
The 3d series runs from Sc (21) to Zn (30). Ca (Z = 20) is an s-block element.
-
MCQWarm-up
The unit commonly used for magnetic moment is- tesla
- ohm
- Bohr magneton (BM)
- coulomb
Answer and solution
Answer: C
The Bohr magneton is the natural unit for the magnetic moment of electrons (1 BM = 9.27 × 10-24 J/T). Tesla measures field strength.
-
NATWarm-up
What is the highest oxidation state of manganese?Answer and solution
Answer: 7
Mn has 3d54s2: 7 valence electrons, so the highest state is +7 (KMnO4, Mn2O7).
-
NATWarm-up
How many unpaired electrons does Zn2+ have?Answer and solution
Answer: 0
Zn2+ is 3d10: all electrons are paired, so 0.
-
NATWarm-up
How many 3d electrons are present in a ground-state Cr atom?Answer and solution
Answer: 5
Cr is 3d54s1: 5 electrons in 3d.
-
NATStandard
How many electrons are in the 3d subshell of Ti3+? (Atomic number of Ti = 22.)Answer and solution
Answer: 1
Atom: [Ar] 3d2 4s2. For a 3d metal the 4s electrons are lost first, then 3d.
Ti3+: remove 3 electrons: 2 from 4s and 1 from 3d, leaving 3d1. Answer: 1.
Why people get this wrong: Atoms fill 4s before 3d, but ions lose 4s electrons first.
-
NATStandard
How many electrons are in the 3d subshell of Mn2+? (Atomic number of Mn = 25.)Answer and solution
Answer: 5
Atom: [Ar] 3d5 4s2. For a 3d metal the 4s electrons are lost first, then 3d.
Mn2+: remove 2 electrons: all 2 come from 4s, leaving 3d5. Answer: 5.
Why people get this wrong: Atoms fill 4s before 3d, but ions lose 4s electrons first.
-
NATStandard
How many electrons are in the 3d subshell of Fe3+? (Atomic number of Fe = 26.)Answer and solution
Answer: 5
Atom: [Ar] 3d6 4s2. For a 3d metal the 4s electrons are lost first, then 3d.
Fe3+: remove 3 electrons: 2 from 4s and 1 from 3d, leaving 3d5. Answer: 5.
Why people get this wrong: Atoms fill 4s before 3d, but ions lose 4s electrons first.
-
NATStandard
How many electrons are in the 3d subshell of Co2+? (Atomic number of Co = 27.)Answer and solution
Answer: 7
Atom: [Ar] 3d7 4s2. For a 3d metal the 4s electrons are lost first, then 3d.
Co2+: remove 2 electrons: all 2 come from 4s, leaving 3d7. Answer: 7.
Why people get this wrong: Atoms fill 4s before 3d, but ions lose 4s electrons first.
-
NATStandard
How many electrons are in the 3d subshell of Ni2+? (Atomic number of Ni = 28.)Answer and solution
Answer: 8
Atom: [Ar] 3d8 4s2. For a 3d metal the 4s electrons are lost first, then 3d.
Ni2+: remove 2 electrons: all 2 come from 4s, leaving 3d8. Answer: 8.
Why people get this wrong: Atoms fill 4s before 3d, but ions lose 4s electrons first.