Home / Courses / Medical entrance (NEET) / Practice / Electromagnetic induction

Electromagnetic induction

Class 12 · 211 questions and templates for Medical entrance (NEET), in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Electromagnetic induction.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    The SI unit of magnetic flux, the weber, is equal to
    1. Tm−2
    2. Tm2
    3. Tm
    4. TA−1
    Answer and solution

    Answer: B

    Φ=BAcos⁡θ, so 1 Wb =1 Tm2. It is also 1 V s.
  2. NATWarm-up

    A coil of area 0.02 m2 is placed with its plane perpendicular to a field of 0.5 T. Find the flux through it (in mWb).
    Answer and solution

    Answer: 10 mWb (±0.01)

    The normal is parallel to B→, so Φ=BA=0.5×0.02=0.01 Wb =10 mWb.
  3. MCQWarm-up

    According to Faraday's law, the emf induced in a coil is proportional to
    1. the rate of change of magnetic flux through it
    2. the magnetic flux through it
    3. the magnetic field at its centre
    4. the resistance of the coil
    Answer and solution

    Answer: A

    ℰ=−NdΦ/dt. A large steady flux induces nothing; it is the change that matters. The resistance affects the current, not the emf.
  4. MCQWarm-up

    Lenz's law is a consequence of the law of conservation of
    1. charge
    2. momentum
    3. mass
    4. energy
    Answer and solution

    Answer: D

    If the induced current helped the change that produces it, the effect would feed itself and energy would be created from nothing. So the induced current must oppose the change, and the work done against it appears as electrical energy.
  5. NATWarm-up

    A conducting rod of length 0.5 m moves at 4 ms−1 perpendicular to a field of 0.2 T, with v→⟂B→⟂ rod. Find the emf between its ends (in V, 2 decimals).
    Answer and solution

    Answer: 0.4 V (±0.005)

    ℰ=Blv=0.2×0.5×4=0.40 V.
  6. MCQWarm-up

    One henry is equal to
    1. one volt per ampere
    2. one ampere second per volt
    3. one volt second per ampere
    4. one weber per metre squared
    Answer and solution

    Answer: C

    ℰ=LdI/dt gives L=ℰdI/dt, so 1 H =1 VsA−1. Also L=Φ/I gives 1 H =1 WbA−1.
  7. NATWarm-up

    The current in a coil of self-inductance 2 H changes at 3 As−1. Find the magnitude of the induced emf (in V).
    Answer and solution

    Answer: 6 V (±0.01)

    |ℰ|=L|dIdt|=2×3=6 V.
  8. NATWarm-up

    An inductor of 0.5 H carries a steady current of 4 A. How much energy is stored in it (in J)?
    Answer and solution

    Answer: 4 J (±0.01)

    U=12LI2=12×0.5×42=4 J.
  9. MCQWarm-up

    The negative sign in ℰ=−dΦ/dt shows that
    1. the emf is always negative
    2. the induced emf opposes the change in flux
    3. flux cannot increase
    4. the induced current is zero
    Answer and solution

    Answer: B

    The sign records Lenz's law: the induced current sets up a field that opposes the change in the flux, whether the flux rises or falls.
  10. MCQWarm-up

    A closed coil is kept at rest in a uniform magnetic field that does not change with time. The induced emf in it is
    1. zero
    2. maximum
    3. equal to BA
    4. equal to B/A
    Answer and solution

    Answer: A

    dΦ/dt=0 when nothing changes, so there is no induced emf, however large the flux.
  11. MCQWarm-up

    A straight conductor moves in a uniform magnetic field with its velocity parallel to the field. The emf induced across its ends is
    1. Blv
    2. 12Blv
    3. Bl/v
    4. zero
    Answer and solution

    Answer: D

    v→×B→=0 when they are parallel, so there is no force on the free charges and no emf.
  12. MCQWarm-up

    The north pole of a bar magnet is pushed towards a coil. Seen from the magnet's side, the induced current in the coil is
    1. clockwise
    2. zero
    3. anticlockwise
    4. first clockwise and then anticlockwise
    Answer and solution

    Answer: C

    The flux through the coil (towards the coil, away from the N pole) is increasing. The coil opposes this by making its near face a north pole too, so that it repels the magnet. A face that looks like a north pole has an anticlockwise current.
  13. MCQWarm-up

    Eddy currents are
    1. currents flowing in a vacuum tube
    2. currents induced in a solid piece of metal by a changing magnetic flux
    3. currents flowing only in insulators
    4. currents in a superconductor at rest
    Answer and solution

    Answer: B

    When the flux through a block of metal changes, circulating currents are induced inside it. They heat the metal and exert a braking force.
  14. MCQWarm-up

    An AC generator converts
    1. mechanical energy into electrical energy
    2. electrical energy into mechanical energy
    3. chemical energy into mechanical energy
    4. electrical energy into heat only
    Answer and solution

    Answer: A

    A coil is turned in a magnetic field by an engine or a turbine. The changing flux induces an emf: mechanical work becomes electrical energy. The reverse process is an electric motor.
  15. NATWarm-up

    The flux through a coil of 10 turns changes by 0.04 Wb in 0.2 s. Find the average induced emf (in V).
    Answer and solution

    Answer: 2 V (±0.01)

    |ℰ|=NΔΦΔt=10×0.040.2=2 V.
  16. NATWarm-up

    An inductor of 0.5 H is connected in series with a 10 Ω resistor. Find the time constant of the circuit (in ms).
    Answer and solution

    Answer: 50 ms (±0.1)

    τ=L/R=0.510=0.05 s =50 ms.
  17. MCQWarm-up

    The dimensional formula of self-inductance L is
    1. [ML2T−2A−1]
    2. [ML2T−3A−1]
    3. [MLT−2A−2]
    4. [ML2T−2A−2]
    Answer and solution

    Answer: D

    U=12LI2, so L=2U/I2 and [L]=ML2T−2A2=ML2T−2A−2.
  18. MCQWarm-up

    When the current in one coil changes, an emf is induced in a neighbouring coil. This is called
    1. self-induction
    2. eddy current heating
    3. mutual induction
    4. the Hall effect
    Answer and solution

    Answer: C

    Mutual induction is the induction of an emf in one coil by a changing current in another. Self-induction is the effect of a coil's own changing current on itself.
  19. MCQWarm-up

    Self-inductance of a coil plays the same role in a circuit as ... in mechanics.
    1. force
    2. mass (inertia)
    3. friction
    4. velocity
    Answer and solution

    Answer: B

    A coil opposes any change of current, just as mass opposes any change of velocity. The energy 12LI2 matches 12mv2.
  20. MCQWarm-up

    The working of a transformer is based on
    1. mutual induction
    2. self-induction only
    3. eddy currents
    4. the heating effect of current
    Answer and solution

    Answer: A

    A changing current in the primary produces a changing flux through the secondary, which induces an emf in it: mutual induction. It needs AC.
  21. MCQWarm-up

    Faraday's experiments showed that a current can be produced by
    1. a steady magnetic field
    2. a stationary charge
    3. a changing magnetic field
    4. a steady electric field
    Answer and solution

    Answer: C

    A steady field does nothing to a stationary coil. It is the change (a moving magnet, or a changing current in another coil) that induces the current.
  22. NATStandard

    A square coil of side 10 cm is in a field of 0.4 T. The normal to the coil makes 60∘ with the field. Find the flux through it (in mWb).
    Answer and solution

    Answer: 2 mWb (±0.02)

    Φ=BAcos⁡θ=0.4×0.01×cos⁡60∘=2×10−3 Wb =2.00 mWb.

    Why people get this wrong: The angle is between the normal and the field.

  23. NATStandard

    A coil of 50 turns and area 0.01 m2 lies with its plane perpendicular to a field that increases uniformly from 0.2 T to 0.6 T in 0.1 s. Find the induced emf (in V).
    Answer and solution

    Answer: 2 V (±0.01)

    ΔΦ=AΔB=0.01×0.4=4×10−3 Wb. |ℰ|=NΔΦΔt=50×4×10−30.1=2.0 V.
  24. NATStandard

    A rod of length 0.3 m slides at 5 ms−1 on rails in a perpendicular field of 0.4 T. The rails are connected through a 2 Ω resistor (the rod and rails have negligible resistance). Find the current (in A, 2 decimals).
    Answer and solution

    Answer: 0.3 A (±0.005)

    ℰ=Blv=0.4×0.3×5=0.6 V. I=ℰ/R=0.6/2=0.30 A.
  25. NATStandard

    For the rod in the previous set-up (0.3 m, 5 ms−1, 0.4 T, circuit resistance 2 Ω), find the force needed to keep it moving at constant speed (in mN).
    Answer and solution

    Answer: 36 mN (±0.5)

    The current is 0.30 A, and the magnetic force on the rod is BIl=0.4×0.3×0.3=0.036 N =36 mN, opposing the motion. An equal applied force keeps it moving at constant speed. (Power check: Fv=0.036×5=0.18 W =I2R=0.09×2.)
  26. NATStandard

    A metal rod of length 0.5 m rotates at 40 rads−1 about one end in a uniform perpendicular field of 0.2 T. Find the emf between its ends (in V, 2 decimals).
    Answer and solution

    Answer: 1 V (±0.01)

    The speed of an element at distance x is ωx. ℰ=∫0lBωxdx=12Bωl2=12×0.2×40×0.25=1.00 V.
  27. NATStandard

    A metal disc of radius 20 cm rotates at 10 revolutions per second about its axis in a field of 0.1 T parallel to the axis. Find the emf between the centre and the rim (in V, 3 decimals).
    Answer and solution

    Answer: 0.126 V (±0.003)

    ω=2π×10=62.83 rads−1. A disc is a set of radial rods all in parallel: ℰ=12BωR2=12×0.1×62.83×0.04=0.126 V.
  28. NATStandard

    An aeroplane with a wingspan of 40 m flies horizontally at 250 ms−1. The vertical component of the Earth's field is 4×10−5 T. Find the emf between its wing tips (in V, 2 decimals).
    Answer and solution

    Answer: 0.4 V (±0.005)

    ℰ=Bvlv=4×10−5×40×250=0.40 V. Only the component of the field perpendicular to both the wing and the velocity counts.

    Why people get this wrong: Use the vertical component of the Earth's field.

  29. NATStandard

    The current in a coil of 0.4 H rises from 0 to 2 A in 0.1 s at a steady rate. Find the induced emf (in V).
    Answer and solution

    Answer: 8 V (±0.05)

    |ℰ|=LΔIΔt=0.4×20.1=8 V, opposing the rise.
  30. NATStandard

    A coil of 100 turns and area 0.05 m2 rotates at 50 Hz in a field of 0.2 T. Find the peak emf (in V, nearest whole number).
    Answer and solution

    Answer: 314 V (±1)

    ℰ0=NBAω=100×0.2×0.05×(2π×50)=314 V.

← All topics