Home / Courses / Medical entrance (NEET) / Practice / Magnetism and matter

Magnetism and matter

Class 12 · 175 questions and templates for Medical entrance (NEET), in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Magnetism and matter.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    The SI unit of the magnetic moment of a bar magnet is
    1. Am−1
    2. Am2
    3. Tm
    4. Wbm−2
    Answer and solution

    Answer: B

    A current loop has M=IA, so the unit is ampere × metre2. It is the same as JT−1 (from U=−MBcos⁡θ). Am−1 is the unit of H and of magnetisation, not of moment.
  2. MCQWarm-up

    Magnetic field lines of a bar magnet
    1. form closed loops, running from the N pole to the S pole outside and from S to N inside
    2. start at the N pole and end at infinity
    3. start at the S pole and end at the N pole outside the magnet
    4. can cross each other near the poles
    Answer and solution

    Answer: A

    There are no magnetic monopoles, so field lines never start or stop. Outside the magnet they go N to S; inside they continue S to N and close. Lines never cross because the field has one direction at a point.
  3. MCQWarm-up

    A diamagnetic substance, placed in a magnetic field, is
    1. weakly attracted
    2. strongly attracted
    3. not affected at all
    4. weakly repelled
    Answer and solution

    Answer: D

    Diamagnetic atoms get a small induced moment opposite to the applied field, so the sample is pushed (weakly) towards the weaker field region. Every material has this effect, but it is only visible when no stronger effect is present.
  4. NATWarm-up

    A coil of 100 turns, each of area 0.01 m2, carries 2 A. Find its magnetic moment (in Am2).
    Answer and solution

    Answer: 2 A m^2 (±0.01)

    M=NIA=100×2×0.01=2 Am2.
  5. NATWarm-up

    A bar magnet of moment 0.5 Am2 is at right angles to a field of 0.2 T. Find the torque on it (in N m, 2 decimals).
    Answer and solution

    Answer: 0.1 N m (±0.005)

    τ=MBsin⁡θ=0.5×0.2×sin⁡90∘=0.10 N m.
  6. MCQWarm-up

    The magnetic susceptibility of a ferromagnetic material is
    1. small and positive
    2. small and negative
    3. large and positive
    4. exactly zero
    Answer and solution

    Answer: C

    Domains in iron, cobalt and nickel line up in a field, so χ is very large (hundreds to thousands) and positive. Small positive values belong to paramagnets and small negative values to diamagnets.
  7. MCQWarm-up

    At the magnetic equator the angle of dip is
    1. 90∘
    2. 0∘
    3. 45∘
    4. 180∘
    Answer and solution

    Answer: B

    At the magnetic equator the Earth's field is horizontal, so the dip needle is level: δ=0. At the magnetic poles the field is vertical and δ=90∘.
  8. MCQWarm-up

    Above its Curie temperature a ferromagnetic substance behaves as a
    1. paramagnetic substance
    2. diamagnetic substance
    3. stronger ferromagnet
    4. superconductor
    Answer and solution

    Answer: A

    Thermal motion destroys the domain alignment, so only a weak paramagnetism is left. Iron has a Curie temperature of about 1043 K.
  9. MCQWarm-up

    At a point on the equatorial line of a short bar magnet, the magnetic field is directed
    1. along the line joining the point to the centre
    2. perpendicular to the axis, away from the magnet
    3. parallel to the moment M→
    4. parallel to the axis, from the N pole side to the S pole side (opposite to the moment)
    Answer and solution

    Answer: D

    On the equatorial line B→=−μ04πM→r3. The moment points from S to N inside the magnet, so the field here points opposite to it (N towards S). On the axial line the field is along M→.
  10. MCQWarm-up

    The area of the hysteresis loop of a material gives
    1. the susceptibility of the material
    2. the Curie temperature
    3. the energy lost as heat per unit volume in one cycle of magnetisation
    4. the retentivity of the material
    Answer and solution

    Answer: C

    Area of the B-H loop has units T×Am−1=Jm−3. It is the energy per unit volume turned into heat in one cycle.
  11. MCQWarm-up

    Gauss's law for magnetism says that the net magnetic flux through any closed surface is
    1. equal to μ0 times the current inside
    2. zero
    3. equal to the charge inside divided by ϵ0
    4. equal to the pole strength inside
    Answer and solution

    Answer: B

    ∮B→⋅dA→=0 because isolated magnetic poles do not exist. Cutting a magnet only gives smaller magnets, each with both poles.
  12. MCQWarm-up

    The relative permeability μr and the susceptibility χ of a material are related by
    1. μr=1+χ
    2. μr=1−χ
    3. μr=χ
    4. μr=χ/(1+χ)
    Answer and solution

    Answer: A

    From B=μ0(H+M) and M=χH we get B=μ0(1+χ)H=μrμ0H, so μr=1+χ.
  13. NATStandard

    A short bar magnet has moment 1.2 Am2. Find its field at a point on its axis 20 cm from its centre (in μT).
    Answer and solution

    Answer: 30 µT (±0.5)

    Baxial=μ04π2Mr3=10−7×2×1.2(0.2)3=10−7×300=3×10−5 T =30 μT.
  14. NATStandard

    A short bar magnet of moment 2 Am2 lies with its centre 10 cm from point P on its equatorial line. Find the field at P (in μT).
    Answer and solution

    Answer: 200 µT (±1)

    Beq=μ04πMr3=10−7×210−3=2×10−4 T =200 μT.
  15. MCQStandard

    For a short magnet, the ratio of the axial field to the equatorial field at the same distance from its centre is
    1. 1
    2. 1/2
    3. 4
    4. 2
    Answer and solution

    Answer: D

    Bax=μ04π2Mr3 and Beq=μ04πMr3, so the ratio is 2.
  16. MCQStandard

    The distance of a point on the axis of a short magnet from it is doubled. The magnetic field there becomes
    1. 14 of its value
    2. 12 of its value
    3. 18 of its value
    4. 116 of its value
    Answer and solution

    Answer: C

    A dipole field falls as 1/r3. With r→2r the field is 1/23=1/8. The 1/r2 rule belongs to a single pole, which does not exist.
  17. NATStandard

    A magnet of moment 0.4 Am2 makes 60∘ with a field of 0.5 T. Find its potential energy U=−M→⋅B→ (in J, 2 decimals, with sign).
    Answer and solution

    Answer: -0.1 J (±0.005)

    U=−MBcos⁡θ=−0.4×0.5×cos⁡60∘=−0.4×0.5×0.5=−0.10 J.
  18. NATStandard

    How much work is needed to turn a magnet of moment 0.3 Am2 from the direction of a 0.2 T field to a position at right angles to it (in J, 2 decimals)?
    Answer and solution

    Answer: 0.06 J (±0.005)

    W=Uf−Ui=(−MBcos⁡90∘)−(−MBcos⁡0∘)=MB=0.3×0.2=0.06 J.
  19. NATStandard

    At a place the horizontal component of the Earth's field is 3×10−5 T and the angle of dip is 60∘. Find the total field (in μT).
    Answer and solution

    Answer: 60 µT (±0.5)

    Bh=Becos⁡δ, so Be=Bhcos⁡δ=30 μT0.5=60 μT.
  20. MCQStandard

    At a place, the vertical and horizontal components of the Earth's field are equal. The angle of dip there is
    1. 30∘
    2. 45∘
    3. 60∘
    4. 90∘
    Answer and solution

    Answer: B

    tan⁡δ=Bv/Bh=1, so δ=45∘.
  21. MCQStandard

    A bar magnet of moment M is cut into two equal halves by a plane perpendicular to its length. The moment of each half is
    1. M/2
    2. M
    3. M/4
    4. 2M
    Answer and solution

    Answer: A

    Pole strength m stays the same (each piece has its own N and S poles of strength m) but the length halves, so M′=m(L/2)=M/2.

    Why people get this wrong: If you cut it along its length instead, the pole strength halves and the moment is again M/2.

  22. MCQStandard

    The susceptibility of a paramagnetic material is 2.4×10−5 at 300 K. By Curie's law its susceptibility at 200 K is
    1. 1.6×10−5
    2. 5.4×10−5
    3. 2.4×10−5
    4. 3.6×10−5
    Answer and solution

    Answer: D

    Curie's law: χ=C/T, so χ∝1/T. χ2=2.4×10−5×300200=3.6×10−5. Cooling makes a paramagnet more susceptible.
  23. MCQStandard

    The best material for the core of a transformer is one with
    1. high retentivity and high coercivity
    2. high retentivity and low coercivity
    3. low retentivity, low coercivity and high permeability
    4. low permeability and high coercivity
    Answer and solution

    Answer: C

    A transformer core is magnetised and demagnetised 50 or 60 times a second, so we want a thin B-H loop (small area, small loss) and a large μ (soft iron). High retentivity and coercivity are what we want in a permanent magnet.
  24. MCQStandard

    Steel is preferred to soft iron for making permanent magnets because steel has a
    1. high permeability
    2. high coercivity (and high retentivity)
    3. low retentivity
    4. low coercivity
    Answer and solution

    Answer: B

    Coercivity measures how hard it is to demagnetise a sample. Steel keeps its magnetism against stray fields and knocks; soft iron loses it easily even though its permeability is higher.
  25. NATStandard

    A solenoid has 800 turns per metre and carries 2.5 A. Find the magnetising field H inside it (in Am−1).
    Answer and solution

    Answer: 2000 A/m

    H=nI=800×2.5=2000 Am−1. H depends only on the free current, not on the core material.
  26. NATStandard

    A rod of volume 20 cm3 has a total magnetic moment of 8 Am2. Find its magnetisation (in 105 Am−1, 1 decimal).
    Answer and solution

    Answer: 4 10^5 A/m (±0.05)

    Magnetisation = moment per unit volume =820×10−6=4×105 Am−1, which is 4.0 in the units asked.
  27. NATStandard

    The magnetic flux density in an iron core is 0.6 T when H=300 Am−1. Find μr (nearest integer).
    Answer and solution

    Answer: 1592 (±5)

    μr=Bμ0H=0.64π×10−7×300=0.63.77×10−4≈1592.
  28. MCQStandard

    A thin rod of a paramagnetic material is suspended in a uniform magnetic field. It will align itself
    1. parallel to the field
    2. perpendicular to the field
    3. at 45∘ to the field
    4. in any direction, because the force is zero
    Answer and solution

    Answer: A

    The rod gets a magnetisation along B→ and tries to lower its energy by lengthening along the field. A diamagnetic rod, in a strong field, aligns perpendicular to it.
  29. MCQStandard

    The susceptibility of a superconductor below its critical temperature is
    1. 0
    2. +1
    3. very large and positive
    4. −1
    Answer and solution

    Answer: D

    A superconductor expels the field completely (Meissner effect): B=0 inside, so μr=1+χ=0 and χ=−1. It is a perfect diamagnet.
  30. MCQStandard

    A small magnet is free to turn in a uniform field B→. Its position of stable equilibrium is the one in which the angle between M→ and B→ is
    1. 90∘
    2. 180∘
    3. 0∘
    4. 45∘
    Answer and solution

    Answer: C

    U=−MBcos⁡θ is least at θ=0 (stable). At 180∘ the torque is also zero but U is a maximum, so any small turn grows (unstable).

← All topics