Rotational motion
Class 11 · 162 questions and templates for Medical entrance (NEET), in order from warm-up to top rank. Check each answer, then read the full solution.
New to this topic? Read the lesson first: Rotational motion.
Loading questions… (they need JavaScript; nothing you type is sent anywhere)
Written questions with solutions
The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.
-
MCQWarm-up
The dimensional formula of torque isAnswer and solution
Answer: C
, so the dimensions are (length)(force) . is force, is angular momentum and is power. Torque has the same dimensions as energy, but it is a different quantity. -
NATWarm-up
A force of 20 N acts at right angles to a spanner, 0.5 m from the nut. Find the torque (in N m).Answer and solution
Answer: 10 N m
The force is perpendicular to the arm, so N m. -
MCQWarm-up
The moment of inertia of a thin ring of mass and radius about an axis through its centre and perpendicular to its plane isAnswer and solution
Answer: B
Every bit of the ring is at the same distance from the axis, so . is the disc, the solid sphere and the hollow sphere. -
MCQWarm-up
The SI unit of angular momentum isAnswer and solution
Answer: A
, so the unit is (the same as J s). is linear momentum, and N m (or ) is the unit of torque. -
NATWarm-up
A wheel of moment of inertia spins at . Find its rotational kinetic energy (in J).Answer and solution
Answer: 25 J
J. -
MCQWarm-up
A skater spinning on ice pulls her arms in. Her angular speed increases because- her angular momentum increases
- her linear momentum is conserved
- the ice pushes her round faster
- her angular momentum stays constant while her moment of inertia decreases
Answer and solution
Answer: D
No external torque acts about the vertical axis, so is constant. Pulling the arms in lowers , so must rise. Her angular momentum itself does not change. -
NATWarm-up
A wheel turns at 120 revolutions per minute. Find its angular speed (in rad/s, 2 decimals).Answer and solution
Answer: 12.57 rad/s (±0.02)
with rev/s. So .Why people get this wrong: Convert minutes to seconds before multiplying by .
-
MCQWarm-up
The moment of inertia of a solid sphere of mass and radius about a diameter isAnswer and solution
Answer: C
For a solid sphere . The hollow (thin-walled) sphere has . -
NATWarm-up
A net torque of 12 N m acts on a body of moment of inertia . Find its angular acceleration (in ).Answer and solution
Answer: 3 rad/s²
, so . -
MCQWarm-up
A rigid body is in complete mechanical equilibrium when- the net force on it is zero
- the net force and the net torque on it are both zero
- the net torque on it is zero
- its centre of mass is at rest
Answer and solution
Answer: B
Zero net force stops the centre of mass accelerating, and zero net torque stops the body's rotation changing. Two equal and opposite forces along different lines (a couple) give zero net force but a torque, so force alone is not enough. -
MCQWarm-up
The moment of inertia of a rigid body depends on- its mass, how the mass is distributed and the position of the axis
- its angular velocity
- the torque applied to it
- its mass only
Answer and solution
Answer: A
depends on the masses and their distances from the chosen axis. It does not depend on how fast the body turns or on the torque. -
NATWarm-up
A wheel turns at a steady . Through what angle does it turn in 10 s (in rad)?Answer and solution
Answer: 30 rad
rad. -
NATWarm-up
A point 0.4 m from the axis of a wheel turning at has what speed (in )?Answer and solution
Answer: 2 m/s
. -
MCQWarm-up
The torque of a force about an axis is zero when- the force is perpendicular to the arm
- the line of action of the force passes through the axis
- the force is large
- the arm is long
Answer and solution
Answer: B
. It is zero if or (the force is along the line to the axis). A force perpendicular to the arm gives the largest torque. -
MCQWarm-up
In rotational motion, the quantity that plays the role of mass in is- the moment of inertia
- the angular momentum
- the torque
- the angular velocity
Answer and solution
Answer: A
matches : torque for force, angular acceleration for acceleration, moment of inertia for mass. -
NATWarm-up
A body with moment of inertia turns at . Find its angular momentum (in ).Answer and solution
Answer: 4 kg m²/s
. -
NATStandard
Find the moment of inertia of a uniform disc of mass 4 kg and radius 0.5 m about its central axis (in ).Answer and solution
Answer: 0.5 kg m² (±0.001)
. -
NATStandard
Find the moment of inertia of a uniform rod of mass 3 kg and length 2 m about an axis through one end and perpendicular to the rod (in ).Answer and solution
Answer: 4 kg m²
. (Check with the parallel axis theorem: .) -
NATStandard
A uniform disc of mass 2 kg and radius 0.2 m turns about an axis through a point on its rim, perpendicular to its plane. Find the moment of inertia (in ).Answer and solution
Answer: 0.12 kg m² (±0.001)
. Parallel axis theorem with : . -
MCQStandard
The perpendicular axis theorem can be applied to- any three-dimensional body
- a solid sphere only
- a body only when it is symmetrical about the z-axis
- a flat (planar) body, with the x and y axes in its plane
Answer and solution
Answer: D
The proof uses for every point, which holds only for a plane lamina. It does not work for a sphere or cube.Why people get this wrong: The theorem needs the body to lie in a plane; the parallel axis theorem works for any body.
-
NATStandard
A thin ring of mass 1 kg and radius 1 m. Find its moment of inertia about a diameter (in ).Answer and solution
Answer: 0.5 kg m² (±0.001)
About the axis perpendicular to the plane through the centre, . By symmetry the two diameters and in the plane have equal , so and . -
NATStandard
A particle of mass 2 kg moves in a straight line at . The line is 4 m from a point . Find its angular momentum about (in ).Answer and solution
Answer: 24 kg m²/s
where is the perpendicular distance of the line of motion from . . -
NATStandard
A flywheel of moment of inertia is acted on by a steady torque of 2 N m for 5 s, starting from rest. Find its angular speed at the end (in rad/s).Answer and solution
Answer: 20 rad/s
. . -
MCQStandard
A solid sphere and a hollow sphere have the same mass and radius. About a diameter,- the solid sphere has the larger moment of inertia
- both have the same moment of inertia
- the hollow sphere has the larger moment of inertia
- it depends on the density of the material only
Answer and solution
Answer: C
Solid: . Hollow: . The hollow sphere has all its mass at the full distance , so is larger. -
NATStandard
A wheel turning at slows down uniformly at until it stops. Find the angle it turns through (in rad).Answer and solution
Answer: 25 rad
with : rad. -
NATStandard
A spinning skater changes her moment of inertia to half its value by pulling in her arms. By what factor does her rotational kinetic energy change?Answer and solution
Answer: 2
stays constant, so doubles. , so halving doubles . The extra energy comes from the work she does pulling her arms in against the outward pull.Why people get this wrong: Energy is not conserved here: the skater does work.
-
MCQStandard
A wheel rolls without slipping on a horizontal road. The point of the wheel that touches the road is- moving forward with speed
- momentarily at rest relative to the road
- moving backward with speed
- moving with speed forward
Answer and solution
Answer: B
Rolling without slipping means . At the contact point the velocity is . The top point moves at . -
NATStandard
A solid cylinder of mass 2 kg rolls without slipping with centre-of-mass speed . Find its total kinetic energy (in J).Answer and solution
Answer: 24 J
and for a solid cylinder. J. (Translational 16 J + rotational 8 J.) -
NATStandard
A force of 10 N acts on the end of a 0.4 m spanner, at to the spanner. Find the torque about the nut (in N m).Answer and solution
Answer: 2 N m
N m. Only the part of the force perpendicular to the arm turns the nut.Why people get this wrong: Use the angle between the force and the arm, not the angle with the perpendicular.
-
MCQStandard
The moment of inertia of a uniform thin rod of mass and length about an axis through its centre and perpendicular to the rod isAnswer and solution
Answer: A
About the centre, . About one end it is (parallel axis theorem). The other two are not standard values.