Home / Courses / Medical entrance (NEET) / Practice / Semiconductor electronics

Semiconductor electronics

Class 12 · 155 questions and templates for Medical entrance (NEET), in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Semiconductor electronics.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    The energy gap between the valence band and the conduction band of silicon is about
    1. 0.67 eV
    2. 1.1 eV
    3. 5.5 eV
    4. 0.01 eV
    Answer and solution

    Answer: B

    Silicon: 1.1 eV; germanium: 0.67 eV; diamond (an insulator): about 5.4 eV. A semiconductor has a gap below about 3 eV.
  2. MCQWarm-up

    Which of the following, when added as an impurity to silicon, makes it an n-type semiconductor?
    1. Phosphorus
    2. Boron
    3. Aluminium
    4. Indium
    Answer and solution

    Answer: A

    Phosphorus has 5 valence electrons: four bond with silicon and the fifth is free to conduct (it is a donor). Boron, aluminium and indium have 3 valence electrons and are acceptors (p-type).
  3. MCQWarm-up

    In an n-type semiconductor, the majority charge carriers are
    1. holes
    2. positive ions
    3. protons
    4. electrons
    Answer and solution

    Answer: D

    Donor atoms supply extra electrons. The holes (made thermally) are the minority carriers.
  4. MCQWarm-up

    A p-n junction diode is forward biased when
    1. the n side is connected to the positive terminal
    2. the battery is removed
    3. the p side is connected to the positive terminal and the n side to the negative terminal
    4. both sides are connected to the positive terminal
    Answer and solution

    Answer: C

    Forward bias pushes holes from p and electrons from n towards the junction, narrowing the depletion layer and lowering the barrier.
  5. MCQWarm-up

    The depletion region of a p-n junction contains
    1. only free electrons
    2. immobile ions and almost no free charge carriers
    3. only free holes
    4. equal numbers of mobile electrons and holes
    Answer and solution

    Answer: B

    Electrons and holes diffuse across and recombine near the junction, leaving the fixed donor ions (positive, on the n side) and acceptor ions (negative, on the p side).
  6. MCQWarm-up

    The barrier potential of a germanium p-n junction at room temperature is about
    1. 0.3 V
    2. 0.7 V
    3. 1.1 V
    4. 5 V
    Answer and solution

    Answer: A

    Germanium: about 0.3 V; silicon: about 0.7 V.
  7. MCQWarm-up

    A rectifier is a circuit that
    1. converts direct current into alternating current
    2. raises the voltage of a DC source
    3. stores charge
    4. converts alternating current into direct current
    Answer and solution

    Answer: D

    A diode conducts only in one direction, so the output of a rectifier flows in one direction only.
  8. MCQWarm-up

    A Zener diode is mainly used as a
    1. rectifier, in forward bias
    2. light source
    3. voltage regulator, in reverse breakdown
    4. amplifier
    Answer and solution

    Answer: C

    In breakdown the voltage across a Zener stays nearly constant while the current changes widely, so it holds a steady voltage.
  9. MCQWarm-up

    A light emitting diode emits light when it is
    1. reverse biased
    2. forward biased
    3. kept unbiased
    4. heated above its Curie temperature
    Answer and solution

    Answer: B

    In forward bias electrons and holes recombine near the junction and release energy as photons.
  10. MCQWarm-up

    A photodiode is used in
    1. reverse bias
    2. forward bias
    3. zero bias only
    4. breakdown with a Zener
    Answer and solution

    Answer: A

    In reverse bias the dark current is small, so a rise in current caused by light is easy to measure.
  11. MCQWarm-up

    The output of an AND gate is 1 only when
    1. either input is 1
    2. both inputs are 0
    3. the inputs are different
    4. both inputs are 1
    Answer and solution

    Answer: D

    AND: Y=A⋅B.
  12. MCQWarm-up

    Which two gates are called universal gates?
    1. AND and OR
    2. NOT and OR
    3. NAND and NOR
    4. XOR and AND
    Answer and solution

    Answer: C

    Every other gate (and so any circuit) can be built using NAND gates alone, or NOR gates alone.
  13. NATWarm-up

    A full-wave rectifier is fed from a 50 Hz supply. Find the frequency of the ripple in its output (in Hz).
    Answer and solution

    Answer: 100 Hz

    Each half-cycle of the input gives one pulse, so the output has twice the input frequency: 2×50=100 Hz.
  14. MCQWarm-up

    As the temperature of a pure semiconductor rises, its resistance
    1. increases
    2. decreases
    3. stays the same
    4. first increases then becomes zero
    Answer and solution

    Answer: B

    More electron-hole pairs are made, so ni rises and conductivity increases. Metals show the opposite: their resistance rises.
  15. MCQWarm-up

    How many valence electrons does a silicon atom have?
    1. 4
    2. 3
    3. 5
    4. 8
    Answer and solution

    Answer: A

    Silicon is in group 14, with four valence electrons which form covalent bonds with four neighbours.
  16. NATStandard

    In silicon ni=1.5×1016 m−3. It is doped with donors to give an electron concentration of 4.5×1022 m−3. Find the hole concentration (in units of 109 m−3).
    Answer and solution

    Answer: 5 1e9 /m^3 (±0.05)

    np=ni2⇒p=(1.5×1016)24.5×1022=2.25×10324.5×1022=5×109 m−3.
  17. NATStandard

    A silicon diode (drop 0.7 V when conducting) is in series with a 430 Ω resistor and a 5 V battery, forward biased. Find the current (in mA, 1 decimal).
    Answer and solution

    Answer: 10 mA (±0.05)

    The resistor carries the rest of the voltage: I=5−0.7430=0.0100 A =10.0 mA.
  18. NATStandard

    A half-wave rectifier gets a sinusoidal signal of peak value 10 V (ideal diode). Find the average (dc) output voltage (in V, 2 decimals).
    Answer and solution

    Answer: 3.18 V (±0.01)

    Vdc=Vmπ=10π=3.18 V.
  19. NATStandard

    A full-wave rectifier gets a sinusoidal signal of peak value 10 V (ideal diodes). Find the average output voltage (in V, 2 decimals).
    Answer and solution

    Answer: 6.37 V (±0.01)

    Vdc=2Vmπ=20π=6.37 V.
  20. NATStandard

    A 12 V supply is connected to a 200 Ω series resistor and a 6 V Zener diode, in reverse breakdown, with nothing else connected. Find the current in the Zener (in mA).
    Answer and solution

    Answer: 30 mA (±0.2)

    The resistor drops 12−6=6 V, so I=6200=0.030 A =30 mA.
  21. NATStandard

    An LED made of a material with an energy gap of 1.9 eV emits light of wavelength about (in nm, nearest integer; use λ=1240/E nm with E in eV).
    Answer and solution

    Answer: 653 nm (±2)

    λ=hcEg=12401.9=653 nm: red light.
  22. NATStandard

    A silicon photodiode has a band gap of 1.1 eV. Find the longest wavelength it can detect (in nm, nearest integer, use hc=1240 eV nm).
    Answer and solution

    Answer: 1127 nm (±3)

    A photon must have at least Eg to make an electron-hole pair: λmax=12401.1=1127 nm (infrared).
  23. MCQStandard

    When a p-n junction is forward biased, its depletion layer
    1. becomes wider
    2. stays the same
    3. disappears completely at all voltages
    4. becomes narrower
    Answer and solution

    Answer: D

    Forward bias pushes carriers towards the junction, so fewer uncovered ions remain; the barrier falls and the layer narrows. Reverse bias widens it.
  24. MCQStandard

    A piece of n-type silicon is
    1. positively charged
    2. negatively charged
    3. electrically neutral
    4. charged, with the sign depending on the dopant
    Answer and solution

    Answer: C

    The extra electrons come from donor atoms which became positive ions. Total negative charge equals total positive charge.

    Why people get this wrong: Majority carriers being electrons does not make the crystal negative.

  25. MCQStandard

    In a p-type semiconductor, the minority carriers are
    1. holes, from acceptor atoms
    2. electrons, produced by thermal generation of pairs
    3. positive ions
    4. neutral atoms
    Answer and solution

    Answer: B

    Holes (majority) come mostly from acceptors. A few electron-hole pairs are made by heat; the electrons are the minority.
  26. MCQStandard

    The inputs to a NAND gate are A=1 and B=1. The output is
    1. 0
    2. 1
    3. not defined for these inputs
    4. the same as A+B
    Answer and solution

    Answer: A

    Y=A⋅B=1=0. NAND gives 0 only when both inputs are 1.
  27. MCQStandard

    The peak inverse voltage (PIV) of each diode in a centre-tapped full-wave rectifier, with a peak voltage Vm across each half of the secondary, is
    1. Vm
    2. Vm/2
    3. 2Vm
    4. 2Vm
    Answer and solution

    Answer: D

    When one diode conducts, the other sees the voltages of both half-windings in series: Vm+Vm=2Vm. A half-wave and a bridge rectifier need only Vm.
  28. MCQStandard

    In an n-type semiconductor the donor energy level lies
    1. just above the top of the valence band
    2. in the middle of the energy gap
    3. just below the bottom of the conduction band
    4. inside the valence band
    Answer and solution

    Answer: C

    Donor electrons need only a small energy (about 0.01 to 0.05 eV) to reach the conduction band. Acceptor levels of p-type lie just above the valence band.
  29. MCQStandard

    On doping a pure semiconductor lightly with an impurity, its conductivity
    1. decreases greatly
    2. increases greatly
    3. stays the same
    4. becomes zero
    Answer and solution

    Answer: B

    One doping atom in 107 or so adds many free carriers, far above the intrinsic number at room temperature.
  30. NATStandard

    For intrinsic silicon, ni=1.5×1016 m−3, electron mobility is 0.135 m2V−1s−1 and hole mobility is 0.048 m2V−1s−1. Find the conductivity (in units of 10−4 Sm−1, 2 decimals). e=1.6×10−19 C.
    Answer and solution

    Answer: 4.39 1e-4 S/m (±0.03)

    σ=e(nμe+pμh)=eni(μe+μh)=1.6×10−19×1.5×1016×0.183=4.39×10−4 Sm−1.

← All topics