Home / Learn / Home skills / Hang a picture or mirrorTool #L381 (formerly #3015)

How to hang a picture or mirror: the right height, hook position and level

Hang a picture or mirror straight and at the right height: where the centre goes, picture hooks vs D-rings vs a French cleat, and a calculator that tells you exactly where to put the hook from the frame size and wire drop.

Keep it one tap away for everyday use.

Bookmark Hang a picture or mirror?

Press Ctrl + D now. Your browser opens its own bookmark box, where you choose the name and folder.

Or install fibub as an app: every tool you open then works offline.

  1. Measure
  2. Hook height
  3. Level
Nothing is uploadedWorks offline once open

Stay safe

  • Check for cables and pipes before you drill or hammer, and never in line with a switch or socket.
  • Large mirrors and glass are heavy and sharp when they break. Get a second person to lift and hold, and wear gloves.
  • Over a bed, sofa or cot, use strong fixings and D-rings or a cleat, never a single nail.
  • Use a sturdy step ladder, not a chair, for anything high up.

What you need

  • Tape measure
  • Pencil
  • Masking tape
  • Spirit level
  • Picture hooks, D-rings or a cleat
  • Fixings to suit the wall
  • Drill or hammer
  • Cable and pipe detector
  • A helper for big pieces

Step by step

  1. 145 cm

    Pick the height

    Hang most pictures with their centre at about 145 to 150 cm (57 to 60 in) above the floor: eye level for most people. Over a sofa or sideboard, leave a gap of 15 to 25 cm (6 to 10 in) above it instead.

    Cut paper to the frame size and tape it up first to see how it looks.

  2. Choose how it hangs

    A light frame can hang on wire over one picture hook. Heavier frames are steadier on two D-rings over two hooks or screws. A heavy mirror is safest on a French cleat: two strips with matching 45° edges, one on the wall and one on the frame.

    Two fixings share the weight and stop the picture tilting.

  3. drop

    Measure the drop

    Hook the wire with a finger or a ruler and pull it up taut, as a hook would. Measure from the top of the frame down to the top of the wire. For D-rings or a cleat, measure down to where they will rest on the hook or wall strip.

  4. centre + height ÷ 2− drop = hook height

    Work out the hook height

    Hook height = centre height + half the picture height − the drop. The calculator below does it for you, in cm or inches.

  5. Mark it on tape, level

    Put masking tape where the fixings go and mark the hook height. For two hooks, mark the second at the D-ring spacing and check with a spirit level that both are level. Scan both marks for cables and pipes.

    Tape also stops the plaster chipping when you drill.

  6. Fit the hook or fixings

    Fit the fixing that suits your wall and weight: picture hooks for light frames, plugs or anchors and screws for heavier ones. Put the hook so its bottom (where the wire sits) is on your mark.

    Not sure which fixing? Use the picker in the lesson before this one.

  7. Hang it and level it

    Hang the picture, rest a spirit level on the top and nudge it until the bubble sits in the middle. Stick small felt or rubber bumpers on the bottom corners to stop it tilting and marking the wall.

Hook height calculator

Measure the frame's full height, top edge to bottom edge. The drop is measured from the top of the frame down to where it rests on the hook.

Top of frame
Bottom of frame

Name the parts

Put the steps in order

Call a professional when

  • The mirror or artwork is very large, heavy or valuable, or goes high up a stairwell.
  • The wall crumbles, the fixings will not hold, or you are not sure what is behind it.
  • You hit a cable or pipe: stop, switch off at the main switch or stop tap, and call an electrician or plumber.

Check yourself

What it does

Most crooked or oddly placed pictures come from guessing where the hook should go. This lesson shows you how to pick a height that looks right, how to choose between a single picture hook, two D-rings or a French cleat, and how to hang the piece level first time. The hook height calculator takes the picture’s height, the drop from the top of the frame to the wire (or D-rings, or cleat) and the centre height you want, and tells you exactly how high to put the hook, plus where along the wall if you give the wall width.

It is the last lesson of the free Wall fixings course. Check what is behind the wall first with What’s in your wall and choose a fixing for the weight with Pick the right wall plug; if you are redecorating first, the paint calculator works out how much paint the wall needs.

How to use it

  1. Read the Stay safe box, then follow the steps with the picture and wall in front of you. Tick each one when it is done (ticks are kept only if you tick Remember my ticks on this device).
  2. In the Hook height calculator, choose how the picture hangs and your units. Type the picture height, the drop and the centre height. For two D-rings, also type their spacing. Type the wall width if you want the picture centred on the wall.
  3. Mark the hook height (and side position) on masking tape on the wall.
  4. Name the parts in the picture, put the steps in order and take the quiz.

What each measurement means

  • Picture height: the whole frame, top edge to bottom edge.
  • Drop: how far below the top of the frame the picture rests on the hook. For wire, pull it up taut first. For D-rings, measure to the top of the ring; for a cleat, to the top of the frame’s cleat.
  • Centre height: where the middle of the picture will be, measured from the floor. 145 cm (57 in) is a good start.
  • D-ring spacing: the distance between the two D-rings, centre to centre. Your two hooks go the same distance apart.
  • Wall width: optional. The calculator centres the picture on the wall and gives the hook positions from the left end.

Worked example

A frame is 60 cm tall. With the wire pulled up taut, the top of the wire is 10 cm below the top of the frame. You want its centre at 145 cm. The top of the frame will be 145 + 60 ÷ 2 = 175 cm from the floor, so the hook goes 10 cm lower, at 165 cm. The bottom of the frame will be at 115 cm. If it hangs on two D-rings 40 cm apart instead, centred on a 300 cm wall, the two hooks go at 165 cm high, 130 cm and 170 cm from the left end of the wall.

FAQs

Should I measure to the bottom of the hook or the nail? To the point where the wire or ring will rest: the lowest point of the hook’s curve.

Why does my picture tilt forward? The wire is fixed too high on the back, or it is too loose. Move the D-rings or screw eyes down to about a third of the way from the top, or shorten the wire.

Is a French cleat hard to make? No. Cut a strip of wood along its length at 45°. Screw one half to the wall (bevel up, facing the wall) and the other to the frame (bevel down), so they hook together.

What about a group of pictures? Treat the whole group as one big picture: put the group’s centre at 145 cm and space the frames 5 to 8 cm (2 to 3 in) apart.

Where the numbers come from

  • The 145 to 150 cm (57 to 60 in) centre height is the common gallery and interior-design guideline for eye level; the 15 to 25 cm gap above furniture is a common decorating rule of thumb. Hook height maths is fibub's own working. Drawings are fibub's own.

Standard scientific values, such as constants, atomic weights and melting points, are facts found in every textbook; we name where ours were checked. If you are an author or publisher and want a value, a credit or a table changed or removed, tell us and we will act quickly.

Last updated 2026-11-16.

Change log for Hang a picture or mirror

  1. Learn: Wall fixings course (#L379 What's in your wall, #L380 Pick the right wall plug, #L381 Hang a picture or mirror) Details on GitHub

Every change to fibub

Related tools