A qPCR test for a passion fruit virus: checking the standard curve and the primers
A new SYBR Green qPCR finds East Asian Passiflora virus in passion fruit leaves 1,000 times more sensitively than ordinary PCR. We check its efficiency, primers and copy numbers with the qPCR analyser and Primer checker.
Passion fruit growers in southern China lose crops to East Asian Passiflora virus (EAPV), which mottles and twists the leaves and spoils the fruit. To catch it early, a team built a qPCR test: a PCR that measures how much viral genetic material is in a sample while it copies it. This article shows how the qPCR analyser checks the test’s standard curve and copy numbers, and how the primer checker looks over its two primers. To compare the virus sequence with other strains before designing primers, use pairwise sequence alignment.
The paper in brief
The test targets the virus’s coat protein gene, the gene for the protein shell around its RNA. It uses SYBR Green, a dye that glows when it binds double-stranded DNA, so no separate probe is needed. To check that only the right product was made, the team heated the finished reaction and watched it melt: a single peak near 81 °C showed one product.
A standard curve links the cycle at which the glow crosses a threshold (the Ct) to the starting number of copies. The team’s curve ran over seven ten-fold steps, from about 1,141 to 11.4 billion copies per µL, with a slope of −3.562, an R² of 0.992 and an efficiency of 90.9%. Efficiency says how close each cycle comes to doubling the DNA: 100% is a perfect doubling. The qPCR found the virus down to 1,141 copies per µL, a 1,000 times lower amount than ordinary PCR could see. In 120 field samples from Yunnan, qPCR found the virus in all 120 and ordinary RT-PCR in 117. In infected plants, the virus peaked in the inoculated leaves 3 days after infection and then spread to the upper leaves.
Checked with the tools
Step 1: efficiency from the slope. If every cycle exactly doubled the DNA, ten times more copies would cross the threshold 3.32 cycles sooner, giving a slope of −3.322. The qPCR analyser turns a slope into efficiency with E = 10^(−1/slope) − 1. For −3.562 that gives 90.87%, matching the paper’s 90.9%. That is just inside the 90 to 110% range the MIQE guidelines (the standard rules for reporting qPCR) call acceptable. The same slope says the 1,000-fold sensitivity gain is worth about 10.7 cycles.
Step 2: where the samples sit on the curve. We rebuilt the curve’s eight ten-fold standards from the published equation (exact points on the line, so our R² is 1 rather than the paper’s 0.992) and read each sample’s mean Ct off it. The lowest standard, 1,141 copies/µL, sits at Ct 31.9; the highest at Ct 7.0 (Figure 1). The inoculated leaves at 3 days, at Ct 26.49, work out at about 38,700 copies/µL. But the inoculated leaves from 7 to 28 days have Ct values of 34 to 35, above the lowest standard’s Ct. That puts them below the lowest standard, at about 130 to 300 copies/µL by the equation, where the curve has not been tested. The negative control, at Ct 39.3, would read about 10 copies/µL, which is why the paper rightly treats it as background.
Step 3: the copy numbers. The copies the paper reports are higher than the equation gives for the same Ct (Figure 2). The gap is not random: about 10 times for every inoculated-leaf sample and about 22 to 25 times for every upper-leaf sample. A steady ratio within each set points to a conversion step, such as a dilution or extraction factor, that is not described in the text. It is not necessarily an error, but a reader cannot rebuild the numbers without it. This is the kind of question to put to the authors, and why the MIQE guidelines ask for every step from sample to copy number to be reported.
Step 4: the primers. Both primers are 20 bases long with 50% and 55% GC (the share of G and C bases, which bind more strongly), and each has 2 G or C bases in its last five, a healthy 3′ end. The Primer checker flags two things to look at. The forward primer can fold back on itself into a hairpin with a 4-base stem, and the two primers can pair at the forward primer’s 3′ end over 3 bases (a cross-dimer). Short 3′ pairings like this are a common source of primer-dimer, a small extra product that SYBR Green also lights up. The single melt peak near 81 °C is the paper’s evidence that it did not happen in practice.
Step 5: the annealing temperature. The checker’s basic formula puts the primers’ melting temperatures at 51.8 and 53.8 °C, and suggests starting annealing 5 °C below the lower one, at 46.8 °C. The paper annealed at 60 °C. Simple formulas like this one often read several degrees low for qPCR buffers, and the team tuned the temperature by experiment, which is the right final test. The gap is a reminder that a formula’s Tm is a starting point.
| Check | Paper | Our tool result |
|---|---|---|
| Efficiency from slope −3.562 | 90.9% | 90.87% |
| Ct at the lowest standard (1,141 copies/µL) | (on its curve) | 31.9 |
| Inoculated leaves, day 3 (Ct 26.49) | 3.4 × 10⁵ copies/µL | 3.87 × 10⁴ copies/µL from the equation |
| Inoculated leaves, days 7 to 28 (Ct 34 to 35) | 1.4 to 3.1 × 10³ copies/µL | 130 to 300 copies/µL, below the lowest standard |
| Primer GC and length | 20 bases each | 50% and 55% GC; hairpin and 3′ cross-dimer flagged |
| Sensitivity gain over PCR | 1,000 times | about 10.7 cycles on this curve |
How we made the graphs
Both charts and every number above come from scripts/blog-figures/eapv-passion-fruit-virus-sybr-qpcr-standard-curve.mjs in fibub’s public code. It calls the tools’ own functions:
stdCurveandquantifyfromsrc/lib/sci/qpcr.ts, the standard-curve maths of the qPCR analyser.gcCount,tmBasic,tmSalt,tmWallace,clamp,hairpinanddimerfromsrc/lib/sci/primer.ts, the checks in the primer checker.
Where the inputs come from: the slope, intercept, efficiency, range, primers, mean Ct values, reported copy numbers and negative control are the paper’s. The eight standard points are our reconstruction from the published equation (the paper’s raw standard Ct values are not used). Nothing is simulated.
How we test the maths
On every change to fibub, tests/sci.mjs checks these functions against independent calculations:
- A ten-point standard curve (100 to 1,000,000 copies, in duplicate) must give a slope of −3.3705, an intercept of 35.4 and an efficiency of 98.01%, matching SciPy’s linear regression, and an unknown at Ct 20 must read 37,073 copies.
- The ΔΔCq method on a made-up drug experiment must give a ΔΔCq of −2.167 and a 4.49-fold rise, with the efficiency-corrected (Pfaffl) version giving 4.27-fold, both matching a separate NumPy calculation.
- The primer maths must match Biopython 1.88: for the primer ACTCACATCGGTGTCACCTG, a Wallace Tm of 62 °C, a basic Tm of 53.83 °C and a salt-adjusted Tm of 48.70 °C at 50 mM sodium; known hairpins (stems of 6 and 8) and dimers must be found as a brute-force search finds them.
Check it yourself
The standard curve, on the qPCR analyser:
- In Gene, quantity and Cq of a dilution series; leave the quantity blank for an unknown, clear the example and type one standard per line as gene, quantity, Cq: EAPV,1141,31.94, EAPV,11410,28.38, EAPV,114100,24.82, EAPV,1141000,21.26, EAPV,11410000,17.70, EAPV,114100000,14.13, EAPV,1141000000,10.57, EAPV,11410000000,7.01.
- Add two unknowns with the quantity left blank: EAPV,,26.49 and EAPV,,33.99.
- The Standard curves card reads EAPV: efficiency 90.9 %, R² 1.0000, with a slope of −3.562 and an intercept of 42.83 in the table.
- Under Unknowns, Ct 26.49 gives 38736 copies/µL and Ct 33.99 gives 303.7 (outside the curve).
The primers, on the primer checker:
- Type GCTCAGCCAACATTGAGACA in Forward primer (5′→3′) and GTGCTACCGCTTCTCTTGCT in Reverse primer (5′→3′, optional). Leave Sodium (mM) at 50.
- It reads 2 things to check; Tm 51.8 / 53.8 °C: a hairpin with a 4 bp stem in the forward primer, and a cross-dimer of 4 bp with 3 at a 3′ end.
- Suggested annealing start reads 46.8 °C; compare it with the paper’s tested 60 °C.
What researchers can use it for
- Check a standard curve in the qPCR analyser: efficiency, R² and whether it falls inside 90 to 110%, from the dilution series alone.
- Flag unknowns outside the curve before reporting copy numbers that were extrapolated.
- Rebuild a paper’s copy numbers from its equation and Ct values, to find missing dilution or extraction steps.
- Screen primer pairs in the primer checker for GC, 3′ ends, hairpins and dimers before ordering them, then confirm with a melt curve.
- Teach how slope, efficiency and Ct connect, with a real plant-virus assay.
The fine print
- The paper was published in September 2026; it is peer-reviewed and open access under CC BY 4.0.
- Our standard points lie exactly on the published line. The paper’s real points scatter a little, so its curve and ours agree in slope and intercept but not in R².
- The copy-number gap may well come from a sample-preparation factor the paper applied but did not spell out; we report the gap, not a cause.
- Simple Tm formulas ignore the buffer’s magnesium and the neighbouring bases; the paper’s tested 60 °C is the value that counts for its assay.
- The Methods give a dilution series down to 11.41 × 10¹ copies/µL, while the Results and abstract put the range and detection limit at 11.41 × 10²; we used the Results.
Sources
- Zhou, H., Zhang, J., Li, Y., Gao, Z., Aslam, M. Q., Xu, J. and Chen, Y. (2026), Establishment and application of a real-time fluorescence quantitative PCR assay for detecting EAPV in Passiflora edulis, PLOS ONE, doi:10.1371/journal.pone.0356266, published 8 September 2026. Licence CC BY 4.0, stated on the article page, checked 2026-11-16. Values used here: primers qEAPVF and qEAPVR; standard curve Ct = −3.562 log(copies) + 42.834, R² 0.992, efficiency 90.9%; range and detection limit 11.41 × 10² to 11.41 × 10⁹ copies/µL; conventional PCR limit 11.41 × 10⁵ copies/µL; melt peak about 81 °C; mean Ct and reported copies for inoculated and upper leaves at 3 to 28 days; negative control Ct 39.30; 120 of 120 field samples positive by qPCR and 117 by RT-PCR.
- Acceptable qPCR efficiency (90 to 110%, slope about −3.1 to −3.6) and reporting rules: Bustin, S. A. et al. (2009), The MIQE guidelines, Clinical Chemistry 55, 611-622.
- Primer rules of thumb (18 to 30 bases, 40 to 60% GC, a G or C near the 3′ end, no long runs or 3′ dimers): standard primer design guidance, as summarised in the Primer checker's guide.
If you are an author or publisher and want a credit or a passage changed or removed, tell us and we will act quickly.