Hearing timer: how long can you safely listen at a sound level

Type a sound level in dB(A), pick the NIOSH or OSHA rule and see how long you can listen, with a countdown and dose used for your set. Free, on your device, not medical advice.

Keep it one tap away for everyday use.

Bookmark Hearing timer?

Press Ctrl + D now. Your browser opens its own bookmark box, where you choose the name and folder.

Or install fibub as an app: every tool you open then works offline.

  1. Set level
  2. Timer
  3. Dose
Nothing is uploadedWorks offline once open

The exchange rate is how many dB louder halves the time allowed. NIOSH is the stricter, health-based advice. OSHA is the US legal limit for work.

Allowed time

Countdown for your set

More options: earplugs

Only the NRR is supported here. Packs sold in Europe show SNR instead, which this page does not convert.

Not medical advice. These are workplace rules turned into a timer. Your ears, your sound system and the room may differ. If your ears ring or sounds seem muffled after a gig, rest them and see a doctor or audiologist.

Phone microphones are not sound level meters. Use a real meter, or ask the venue what level the system is running at, and treat the number you type here as an estimate. Rules differ by country and job: check the official source.

What it does

Loud sound harms hearing by how loud it is and how long you hear it. Workplace rules turn this into an allowed time: at 85 dB(A) it is 8 hours under the NIOSH advice, and every 3 dB louder halves it. This page does that sum for any level you type, and runs a countdown through your set that shows the share of the day’s dose used so far.

It is made for DJs, who stand next to monitors and speakers for hours. It is not medical advice, and a phone microphone is not a sound level meter, so treat the level as an estimate. For a whole day with several levels use the noise dose calculator calculator, and check levels in your mix with the LUFS meter and your set-up with the soundcheck list.

How to use it

  1. Type the level, or pick an example to fill it in.
  2. Choose the Rule.
  3. Read the allowed time. Enter your set length and press Start when you begin. Pause, Continue and Reset do what they say.
  4. Under More options you can add earplugs.

What each setting does

  • NIOSH: 85 dB(A) for 8 hours, 3 dB exchange. Health-based advice.
  • OSHA: 90 dB(A) for 8 hours, 5 dB exchange. The US legal limit for work.
  • Earplugs (NRR): lowers the level at your ear by (NRR − 7) × 0.5 dB, a cautious estimate.

Worked example

At 94 dB(A) under NIOSH, 94 is 9 dB above 85, which is three halvings, so 8 ÷ 8 = 1 hour. Under OSHA, 95 dB(A) is 5 dB above 90, one halving, so 4 hours. A 2-hour set at 94 dB(A) under NIOSH is 200% of the day’s dose.

FAQs

Is it safe to stay under 100%? It is the rule’s limit for a day, not a promise. Rest your ears, and stop if they ring.

Why do the two rules differ? NIOSH halves the time for every 3 dB, matching the energy in the sound. OSHA’s 5 dB is a legal compromise.

Can I measure with my phone? Not reliably. Use a proper meter.

Where the numbers come from

  • Allowed time T = 8 h / 2^((L - Lc) / q). NIOSH (1998), Criteria for a Recommended Standard: Occupational Noise Exposure, DHHS (NIOSH) Publication No. 98-126: Lc 85 dB(A), q 3 dB. US OSHA 29 CFR 1910.95: Lc 90 dB(A), q 5 dB. Checked 2026-11-18. Rules differ by country and job: check the official source.
  • Example levels (conversation about 60, heavy city traffic about 85, motorcycle about 95 dB(A)) are rounded typical values from the US NIDCD page on noise-induced hearing loss. Checked 2026-11-18.
  • Earplug rule of thumb: for A-weighted levels the printed NRR is reduced by 7 dB (OSHA 29 CFR 1910.95 Appendix B) and then halved as a safety margin, as in older US guidance, so the cut is (NRR - 7) x 0.5. Real fit varies a lot. Checked 2026-11-18; check the official source. SNR (used in Europe) is not converted.

Standard scientific values, such as constants, atomic weights and melting points, are facts found in every textbook; we name where ours were checked. If you are an author or publisher and want a value, a credit or a table changed or removed, tell us and we will act quickly.

Last updated 2026-11-18.

Change log for Hearing timer

  1. Give the DJ and music tools their own order numbers; run the music engine checks in npm test Details on GitHub
  2. Add soundcheck list, hearing timer, rider maker and release checklist tools Details on GitHub

Every change to fibub

Related tools

Noise dose calculator #T679 List the noise levels a person is exposed to and for how long, and get the daily noise dose in per cent, the 8-hour time-weighted average, LEX,8h, the allowed time at each level and the time left at the loudest task, for a criterion level, exchange rate and threshold you choose (presets follow NIOSH, US OSHA and the EU and UK rules). Soundcheck list #T1031 A tick list for a DJ's venue sound check and gear: arrive, power, mixer, booth monitor, PA, recording and after the set. Edit it, print it or copy it as text. Free, on your device. LUFS meter #T1036 Watch loudness live in LUFS (ITU-R BS.1770, EBU R 128): momentary, short-term, integrated, loudness range and true peak, with a scrolling graph and −14 and −23 target lines. Measure a microphone, a browser tab's sound or a file. Mix recorder #T1021 Record your DJ set from a mixer, audio interface or browser tab, press New track as each song comes in, and save WAV plus a tracklist as text, CUE sheet or CSV. Or mark the tracks in a mix you already have. Nothing is uploaded. Mix planner #T1024 Type or import a track list with BPM and key, pick a start track and an energy shape, and get a running order where each mix blends in key and the tempo moves in small steps, with the path on the key wheel. Nothing is uploaded. Tempo matcher #T1025 Tap the beat or type two BPM values and see the pitch fader percent that matches them, which fader ranges allow it, the key you will hear without key lock, and half-time or double-time matches. Nothing is uploaded.