LUFS meter: live loudness meter for microphone, browser tab or file

Watch loudness live in LUFS (ITU-R BS.1770, EBU R 128): momentary, short-term, integrated, loudness range and true peak, with a scrolling graph and −14 and −23 target lines. Measure a microphone, a browser tab's sound or a file.

Keep it one tap away for everyday use.

Bookmark LUFS meter?

Press Ctrl + D now. Your browser opens its own bookmark box, where you choose the name and folder.

Or install fibub as an app: every tool you open then works offline.

  1. Pick source
  2. Play
  3. Watch
Nothing is uploadedWorks offline once open

Choose what to measure. Sound is measured on this device and never recorded or sent.

Short-term (3 s)
—
Integrated (since reset)
—
Momentary (0.4 s)
—
Loudness range
—
True peak (highest)
—
Loudest momentary
—

short-term momentary targets

More options

Lines at −14 (streaming) and −23 (EBU R 128 broadcast) are always shown. Most microphones are mono; tick stereo only for a two-channel line input.

LUFS measures the signal, not the sound in the room: a microphone reading is not a calibrated sound level (dB SPL), and it depends on the microphone and its gain. Turn off any voice processing in the browser or the system for honest numbers.

What it does

This is a loudness meter like the ones in broadcast and streaming studios, in your browser. It measures sound the way people hear it, in LUFS, following ITU-R BS.1770 and the EBU R 128 meter rules. You can point it at a microphone or line input, at the sound of another browser tab (a video, a stream, a web player) or at a file on your device. Nothing is recorded or sent.

For a file you already have, the loudness normaliser measures it in one go and can fix the level; to make a track hit a target, use track mastering.

How to use it

  1. Press Microphone or line in, A browser tab’s sound (Chrome, Edge and other Chromium browsers; tick “Share tab audio”) or Play a file.
  2. Watch the numbers and the graph. The dashed lines mark −14 LUFS (streaming), −23 LUFS (broadcast) and your own target.
  3. Press Reset to start the integrated reading again, or Stop.

What each number means

  • Momentary: the last 0.4 seconds. It jumps around.
  • Short-term: the last 3 seconds; the best one to ride while mixing.
  • Integrated: the whole time since you pressed Reset, with quiet parts gated out. This is the number streaming services and broadcasters judge.
  • Loudness range: how much the short-term level moves (EBU Tech 3342).
  • True peak: the highest point between samples, by 4× oversampling.

Worked example

A steady 1 kHz tone at −20 dBFS reads −23.0 LUFS on every meter, the BS.1770 check value, with a true peak of −20.0 dBTP and a loudness range of 0 LU. Played from a file, this page shows exactly that.

FAQs

Is the microphone reading how loud the room is? No. It is the level of the signal, which depends on the microphone and its gain. For sound levels in the room, use a calibrated sound level meter.

Why can’t I share a tab’s sound? Only Chromium browsers include tab sound when sharing, and only for tabs (not every window).

Is anything recorded? No. Sound is measured as it arrives and thrown away.

Where the numbers come from

  • ITU-R BS.1770-4 (K-weighting, gating, true peak), EBU R 128 (−23 LUFS) and EBU Tech 3341 (momentary 400 ms, short-term 3 s) and Tech 3342 (loudness range). The −14 LUFS streaming line is the level Spotify and YouTube give on their help pages, checked 2026-11-18; services change it, so check the official source.

Standard scientific values, such as constants, atomic weights and melting points, are facts found in every textbook; we name where ours were checked. If you are an author or publisher and want a value, a credit or a table changed or removed, tell us and we will act quickly.

Last updated 2026-11-18.

Change log for LUFS meter

  1. Give the DJ and music tools their own order numbers; run the music engine checks in npm test Details on GitHub
  2. LUFS meter (#T1036) Details on GitHub

Every change to fibub

Related tools