Units, dimensions and errors
Class 11 · 190 questions and templates for Engineering entrance, in order from warm-up to top rank. Check each answer, then read the full solution.
New to this topic? Read the lesson first: Units, dimensions and errors.
Loading questions… (they need JavaScript; nothing you type is sent anywhere)
Written questions with solutions
The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.
-
MCQWarm-up
Which of the following is not an SI base unit?- kelvin
- newton
- mole
- candela
Answer and solution
Answer: B
The seven SI base units are metre, kilogram, second, ampere, kelvin, mole and candela. Kelvin, mole and candela are base units. The newton is a derived unit: . -
MCQWarm-up
The dimensional formula of force isAnswer and solution
Answer: A
Force = mass × acceleration. Mass is and acceleration is , so force is . is energy, is momentum and is pressure. -
MCQWarm-up
Power has the dimensional formulaAnswer and solution
Answer: D
Power = work / time = . -
NATWarm-up
Convert a speed of into .Answer and solution
Answer: 10 m/s
Multiply km/h by . So m/s. -
NATWarm-up
How many significant figures are there in the measurement ?Answer and solution
Answer: 3
Leading zeros only show the decimal place, so they do not count. The digits 4, 5 and the trailing 0 after the decimal point all count. That gives 3 significant figures. -
MCQWarm-up
One light year is about- m
- m
- m
- m
Answer and solution
Answer: C
A light year is the distance light travels in one year: m. is the speed of light, and is the number of seconds in a year. -
MCQWarm-up
Angular momentum has dimensionsAnswer and solution
Answer: B
Angular momentum : . -
MCQWarm-up
A student measures a length as cm. The true value is cm. The absolute error is- 0.2 cm
- 2 cm
- 2 %
- 0.02 cm
Answer and solution
Answer: A
Absolute error = |measured − true| = cm. The relative error would be , which is 2 %. -
MCQWarm-up
The least count of an ordinary metre scale marked in millimetres is- 1 cm
- 0.1 mm
- 1 m
- 1 mm
Answer and solution
Answer: D
The least count is the smallest division the instrument can read. A scale marked in millimetres reads to 1 mm. -
MCQWarm-up
Which of these physical quantities is dimensionless?- Surface tension
- Frequency
- Refractive index
- Angular velocity
Answer and solution
Answer: C
Refractive index is a ratio of two speeds, so it has no dimensions. Surface tension is , and frequency and angular velocity are both . -
MCQWarm-up
Statement I: The number 0.0050 has two significant figures.
Statement II: Leading zeros are not significant.- Both Statement I and Statement II are true
- Both Statement I and Statement II are false
- Statement I is true but Statement II is false
- Statement I is false but Statement II is true
Answer and solution
Answer: A
Leading zeros show only the place of the decimal. The digits 5 and 0 count, giving two. Both statements are true. -
MCQStandard
The dimensional formula of Planck's constant (from ) isAnswer and solution
Answer: B
. This is the same as angular momentum. -
MCQStandard
The gravitational constant in has dimensionsAnswer and solution
Answer: A
. -
MCQStandard
Which pair of quantities has the same dimensions?- Force and impulse
- Pressure and force
- Momentum and energy
- Work and torque
Answer and solution
Answer: D
Work and torque are both . Force is but impulse is . Pressure is force per area. Momentum is and energy is .Why people get this wrong: Same dimensions do not mean the same physical quantity: work is a scalar and torque is a vector.
-
MCQStandard
The coefficient of viscosity has dimensionsAnswer and solution
Answer: C
From : . -
NATStandard
dyne. Find .Answer and solution
Answer: 5
. One dyne is . So . -
NATStandard
Express in .Answer and solution
Answer: 127008 km/h² (±5)
km and h, so . Then .Why people get this wrong: The time conversion factor is squared, since time appears squared.
-
MCQStandard
The ratio of the electric field to the magnetic field, , has the dimensions of- acceleration
- velocity
- force
- time
Answer and solution
Answer: B
The Lorentz force gives and the same dimensions, so in dimensions. Hence has dimensions of velocity. -
MCQStandard
and . The sum isAnswer and solution
Answer: A
In a sum, absolute errors add: . -
NATStandard
. The percentage errors in and are and . What is the maximum percentage error in ?Answer and solution
Answer: 5
For a product, relative errors add: . -
NATStandard
. The percentage error in is and in is . Find the maximum percentage error in .Answer and solution
Answer: 7
Powers multiply the relative error, and for a quotient the errors still add: .Why people get this wrong: The error in a quotient is not the difference of errors.
-
NATStandard
In a vernier caliper, 1 main scale division (MSD) is 1 mm and 10 vernier divisions equal 9 MSD. Find the least count in cm.Answer and solution
Answer: 0.01 cm (±0.0001)
Least count = 1 MSD − 1 VSD. 10 VSD = 9 MSD gives 1 VSD = 0.9 mm. So LC = mm cm. -
MCQStandard
A vernier scale has 10 divisions equal to 9 divisions of a main scale whose division is 0.5 mm. The least count is- 0.5 mm
- 0.1 mm
- 0.45 mm
- 0.05 mm
Answer and solution
Answer: D
LC = (value of 1 MSD)/(number of vernier divisions) = mm. The 0.45 mm is the length of one vernier division, not the least count. -
MCQStandard
A screw gauge has pitch 1 mm and 100 divisions on the circular scale. Its least count is- 0.1 mm
- 1 mm
- 0.01 mm
- 0.001 mm
Answer and solution
Answer: C
LC = pitch / number of circular divisions = mm. -
MCQStandard
Add cm and cm, and give the answer with the right number of significant figures.- 5.90 cm
- 5.9 cm
- 5.8 cm
- 6 cm
Answer and solution
Answer: B
. In addition, the answer keeps as many decimal places as the least precise number, which has one decimal place. So the answer is 5.9 cm.Why people get this wrong: Addition follows decimal places; multiplication follows significant figures.
-
MCQStandard
The product (both measured values) should be reported as- 8.2
- 8.208
- 8.21
- 8
Answer and solution
Answer: A
. In multiplication, the answer has as many significant figures as the least precise factor. has 2, so the answer is 8.2. -
MCQStandard
The dimensions of surface tension areAnswer and solution
Answer: D
Surface tension = force / length . It is also energy / area. -
MCQStandard
Which equation is dimensionally correct? (: distance, : speeds, : acceleration, : time)Answer and solution
Answer: C
Check every term. is and is , so the first equation is consistent. In , is a length but is a speed. In , is a speed but is a length. In , is a speed but is speed squared. Only the first passes.Why people get this wrong: A dimension check only rejects; it cannot confirm numerical factors such as the 2 in .
-
MCQStandard
Add , and and report the result correctly.- 31.122
- 31.1
- 31.12
- 31
Answer and solution
Answer: B
The sum is . The least precise number is with one decimal place. So round to one decimal place: 31.1. -
MCQStandard
kilowatt-hour equals- J
- J
- J
- J
Answer and solution
Answer: A
J.