Module 2: Units, dimensions and errors · Lesson 2.1 · about 30 min
Units, dimensions and errors
SI units, dimensional formulae, dimensional analysis (checking, deriving and converting), significant figures, how errors combine, and reading a vernier caliper and screw gauge, from basics to JEE Advanced depth.
Physics · Class 11 · about 30 minutes. By the end you will be able to find the dimensions of any quantity, use them to check and derive formulae, combine errors correctly and read a vernier and a screw gauge.
1. Base units and derived units
The SI system has seven base units. Every other unit is built from them.
| Quantity | Unit | Symbol | Dimension |
|---|---|---|---|
| Mass | kilogram | kg | [M] |
| Length | metre | m | [L] |
| Time | second | s | [T] |
| Electric current | ampere | A | [A] (some books write [I]) |
| Temperature | kelvin | K | [K] (or [θ]) |
| Amount of substance | mole | mol | [mol] (or [N]) |
| Luminous intensity | candela | cd | [cd] (or [J]) |
Since 2019 all seven are defined by fixing exact values of constants of nature, such as the speed of light (exactly 299 792 458 m/s) and the Planck constant. Two supplementary units are dimensionless: the radian (plane angle) and the steradian (solid angle).
A derived unit is a combination: speed in m/s, force in newtons (1 N = 1 kg m s⁻²), energy in joules (1 J = 1 N m).
2. Dimensions: the building blocks of a quantity
The dimensional formula of a quantity shows which powers of the base quantities it contains. Velocity is length divided by time, so . Force is mass times acceleration: .
Quantities worth knowing by heart:
| Quantity | Dimensions | Quantity | Dimensions |
|---|---|---|---|
| Work, energy, torque | Power | ||
| Momentum, impulse | Angular momentum, Planck constant h | ||
| Pressure, stress, modulus | Surface tension, spring constant | ||
| Coefficient of viscosity | Gravitational constant G | ||
| Charge | Voltage | ||
| Resistance | Capacitance | ||
| Permittivity ε₀ | Permeability μ₀ |
“Torque and work are the same quantity because they have the same dimensions.” Same dimensions do not mean same quantity. Torque is a vector (force times lever arm); work is a scalar (force along a displacement). Equal dimensions are necessary for an equation to be right, never proof that it is.
3. Three uses of dimensional analysis
(a) Checking an equation. Every term added or equated must have the same dimensions (the principle of homogeneity). In , each term is [L], so the equation could be right.
(b) Deriving a relation. Suppose the period of a pendulum depends on its length l, the mass m and g. Write , so . Matching powers: M gives b = 0, T gives −2c = 1, L gives a + c = 0. So . The method cannot find the number k (it is 2π), and it fails when the quantity depends on more than three base quantities, on a dimensionless number, or on a sum of terms.
(c) Converting units. A quantity is the same whatever the units, so . Example: 1 J in CGS units (g, cm, s): erg.
- [M], [L], [T]
- the mass, length and time content of a quantity
- Homogeneity
- you can only add or equate things with the same dimensions
- Dimensionless
- angles, strain, refractive index, the argument of sin, log and ex
- Physical meaning
- Nature does not care about our units. A true law must stay true when you change from metres to centimetres, which is exactly what dimensional analysis checks.
A JEE favourite: in the bracket must be dimensionless, so and . In (P a pressure, x a distance, kT an energy), first make the exponent dimensionless, so ; then .
4. Significant figures
Significant figures are the digits you actually measured, plus one estimated digit.
- All non-zero digits count. Zeros between them count (2005 has 4).
- Leading zeros never count (0.0045 has 2).
- Trailing zeros count if there is a decimal point (4.500 has 4; 4500 is ambiguous, so write or ).
- Multiplying or dividing: keep as many significant figures as the least precise factor.
- Adding or subtracting: keep as many decimal places as the least precise term.
- Rounding: round half to even in strict work (2.745 → 2.74, 2.735 → 2.74); most exams accept ordinary rounding, so follow the question.
5. Errors and how they combine
For a measurement x with error Δx: absolute error Δx, relative error Δx/x, percentage error 100 Δx/x. The mean absolute error of repeated readings is the average of the sizes of their differences from the mean.
| If the quantity is… | its maximum error is… |
|---|---|
| (absolute errors add, even when subtracting) | |
| or | |
The quantity with the highest power contributes most, so measure it most carefully (in a pendulum, the period T, which is squared). Try it:
“Subtracting two quantities subtracts their errors.” Never. Errors are uncertainties: each can push the result either way, so the worst case always adds them. That is why the difference of two nearly equal numbers has a huge percentage error.
6. Reading a vernier caliper and a screw gauge
A vernier has N divisions that span N − 1 main-scale divisions. Its least count is 1 main division − 1 vernier division = (1/N) main division, 0.1 mm for the usual 10-division vernier.
Reading = main-scale reading + (coinciding vernier division × least count), then subtract the zero error (a positive zero error means the reading is too big).
A screw gauge works the same way: least count = pitch / number of circular-scale divisions (0.5 mm / 50 = 0.01 mm is common). Reading = main-scale reading + (circular-scale division × least count) − zero error. If the circular zero lies below the reference line when the jaws touch, the zero error is positive.
- Seven SI base units; every other unit and dimension is built from them.
- Find dimensions from a defining formula; memorise the common ones (energy , pressure , h , G ).
- Dimensional analysis checks equations, derives power-law relations (not the constant) and converts units.
- Arguments of sin, log and exponentials must be dimensionless.
- Errors add: absolute errors for sums and differences, relative errors times their powers for products, quotients and powers.
- Vernier least count = 1 MSD − 1 VSD; screw gauge least count = pitch / circular divisions; always correct for zero error.
Check yourself
Sources
- Bureau International des Poids et Mesures (2019), The International System of Units (SI), 9th edition https://www.bipm.org/en/publications/si-brochure
- NIST, CODATA recommended values of the fundamental physical constants https://physics.nist.gov/cuu/Constants/
- National Medical Commission NEET (UG) syllabus and JEE Main / JEE Advanced 2026 syllabi: Units and measurements, experimental skills
Your ticks stay in this browser. Save them as a file on the course home.
Updated 2026-11-22. Syllabus and exam patterns follow the official notices checked on 2026-11-22; they can change every year, so check the official exam website. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.