Home / Courses / GATE Physics / Practice / Semiconductors, Landau levels and the Hall effect

Semiconductors, Landau levels and the Hall effect

Solid state physics and devices · 84 questions and templates for GATE Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Semiconductors and the Hall effect.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    On the plateau with integer filling factor ν of the integer quantum Hall effect, the Hall resistance Rxy equals
    1. νhe2
    2. hνe2
    3. h2νe
    4. νe2h
    Answer and solution

    Answer: B

    With ν Landau levels exactly full, ns=νeB/h, and the classical Rxy=B/nse becomes h/νe2. It stays fixed over a range of B (the plateau) because states between the levels are localised. νe2/h is the Hall conductance.

    Why people get this wrong: νe2/h is the conductance, the inverse.

  2. MCQWarm-up

    The von Klitzing constant RK=h/e2 is about
    1. 25.8 kΩ
    2. 12.9 kΩ
    3. 377 Ω
    4. 4.11 kΩ
    Answer and solution

    Answer: A

    h/e2=6.626×10−34/(1.602×10−19)2=25813 Ω. Its half, 12.9 kΩ, is the ν=2 plateau; 377 Ω is the impedance of free space (=2αRK).
  3. NATWarm-up

    A two-dimensional electron gas has sheet density 2.42×1015 m−2 in a field of 5.0 T. Its Landau-level filling factor ν=nsh/eB is ______ (to two decimal places).
    Answer and solution

    Answer: 2 (±0.02)

    Each Landau level holds eB/h states per unit area (per spin). eB/h=1.602×10−19×5.0/6.626×10−34=1.209×1015 m−2. ν=2.42×1015/1.209×1015=2.00: the lowest Landau level is full for both spins.
  4. MCQWarm-up

    In a cyclotron resonance experiment on a semiconductor, the microwave frequency ω at resonance in a field B directly gives
    1. the carrier density, n=ω/eB
    2. the effective mass, m∗=eB/ω
    3. the relaxation time, τ=1/ω
    4. the band gap, Eg=ℏω
    Answer and solution

    Answer: B

    Carriers circle at ωc=eB/m∗, and power is absorbed when ω=ωc. So m∗=eB/ω, independent of density and scattering, provided ωcτ>1 so that the orbit completes.
  5. MSQWarm-up

    The effective density of states of the conduction band is Nc=2(md∗kBT2πℏ2)3/2. Which statements are correct?
    1. Nc is the actual number of states per unit volume in the conduction band.
    2. Nc∝T3/2.
    3. A heavier density-of-states mass gives a larger Nc.
    4. In a non-degenerate semiconductor n=Nce−(Ec−EF)/kBT.
    Answer and solution

    Answer: B, C, D

    Integrating g(E)e−(E−EF)/kBT over the band gives n=Nce−(Ec−EF)/kBT: Nc is the number of states one would need at the band edge to give the same n, an effective number. It grows as (md∗T)3/2. The real band has far more states.
  6. MCQWarm-up

    An intrinsic semiconductor (n=p) has electron mobility larger than hole mobility. Its Hall coefficient is
    1. positive
    2. zero, because n=p
    3. negative
    4. positive or negative depending on the field direction
    Answer and solution

    Answer: C

    For two carriers RH=pμh2−nμe2e(pμh+nμe)2. With n=p the numerator is n(μh2−μe2)<0. The faster carriers are deflected more strongly, so they win.

    Why people get this wrong: Equal numbers do not cancel: each carrier enters weighted by the square of its mobility.

  7. MCQWarm-up

    An n-type semiconductor bar (all donors ionised, intrinsic carriers negligible) shows a Hall voltage VH at a given current and magnetic field. An otherwise identical bar with twice the donor density, at the same current and field, shows
    1. 2VH
    2. VH/2
    3. the same VH
    4. VH/4
    Answer and solution

    Answer: B

    VH=IB/(nqt) for a bar of thickness t. With twice the carriers, each moves half as fast for the same current, so the magnetic force and the Hall field are halved: VH/2. This is why Hall sensors use lightly doped semiconductors rather than metals.

    Why people get this wrong: More carriers do not mean more Hall voltage; the Hall voltage measures the drift speed, which falls.

  8. NATStandard

    Cyclotron resonance at 24 GHz is observed for electrons in a field of 0.30 T. Their effective mass is ______ me (to three decimal places).
    Answer and solution

    Answer: 0.35 (±0.003)

    m∗me=eB2πfme=1.602×10−19×0.302π×24×109×9.109×10−31=4.81×10−201.374×10−19=0.350.

    Why people get this wrong: Forgetting the 2π between f and ω.

  9. NATStandard

    A current of 1.0 μA flows along a two-dimensional electron gas of sheet density 5.0×1015 m−2 in a perpendicular field of 1.0 T. The Hall voltage is ______ mV (to two decimal places).
    Answer and solution

    Answer: 1.25 (±0.01)

    In 2D the thickness drops out: VH=IBnse=10−6×1.05.0×1015×1.602×10−19=1.25×10−3 V. The Hall resistance VH/I=1.25 kΩ is independent of the sample's width and length.
  10. MCQStandard

    If the temperature of a semiconductor is raised from 150 K to 600 K, its effective conduction-band density of states Nc increases by a factor of
    1. 4
    2. 16
    3. 2
    4. 8
    Answer and solution

    Answer: D

    Nc∝T3/2, and (600/150)3/2=43/2=8.
  11. NATStandard

    Silicon's conduction band has density-of-states mass 1.08me. At 77 K its effective density of states Nc is ______ ×1018 cm−3 (to two decimal places).
    Answer and solution

    Answer: 3.66 (±0.04)

    Nc=2(m∗kBT2πℏ2)3/2. For m∗=me at 300 K this is 2.51×1019 cm−3. Scale: ×1.083/2=1.122 and ×(77/300)3/2=0.130: Nc=2.51×1019×1.122×0.130=3.66×1018 cm−3.
  12. MCQStandard

    The intrinsic Fermi level of a semiconductor with density-of-states masses me∗ and mh∗ lies at
    1. Ei=Ec+Ev2+34kBTln⁡mh∗me∗
    2. Ei=Ec+Ev2+32kBTln⁡mh∗me∗
    3. Ei=Ec+Ev2+34kBTln⁡me∗mh∗
    4. Ei=Ec+Ev2 exactly at every temperature
    Answer and solution

    Answer: A

    Set Nce−(Ec−Ei)/kBT=Nve−(Ei−Ev)/kBT: Ei=Ec+Ev2+kBT2ln⁡NvNc, and Nv/Nc=(mh∗/me∗)3/2, giving the factor 34. Heavier holes push Ei up towards the conduction band.
  13. MSQStandard

    Which statements about the integer quantum Hall effect in a 2D electron gas are correct?
    1. The plateaus have finite width only because disorder localises the states between Landau levels.
    2. Plateaus are best seen in perfectly clean samples, where they become wider.
    3. On a plateau the longitudinal resistance Rxx drops to zero.
    4. The plateau value h/νe2 does not depend on the sample's size, shape or impurity content.
    Answer and solution

    Answer: A, C, D

    When EF lies among localised states between Landau levels, nothing can scatter and Rxx→0, while Rxy is pinned at h/νe2 to parts in 1010, whatever the sample details. In a perfectly clean sample there are no localised states, EF jumps from one level to the next and the plateaus shrink to points.
  14. MCQStandard

    In a semiconductor, lattice scattering alone would give a mobility of 1500 cm2/V s and impurity scattering alone 3000 cm2/V s. By Matthiessen's rule the actual mobility is
    1. 4500 cm2/V s
    2. 2250 cm2/V s
    3. 1500 cm2/V s
    4. 1000 cm2/V s
    Answer and solution

    Answer: D

    Scattering rates add: 1/τ=1/τL+1/τI, so 1/μ=1/1500+1/3000=3/3000, giving μ=1000 cm2/V s. The total is always below the smaller of the two.
  15. MCQStandard

    In a non-degenerate semiconductor, the mobility limited by acoustic-phonon (lattice) scattering varies with temperature as
    1. T3/2
    2. T−1/2
    3. T−3/2
    4. T1/2
    Answer and solution

    Answer: C

    The phonon population grows as T and the carriers' thermal speed as T1/2, so 1/τ∝T⋅T1/2 and μ∝T−3/2. Ionised-impurity scattering is the opposite, μ∝T3/2: fast carriers are deflected less. Together they give a mobility peak at intermediate temperature.

    Why people get this wrong: T3/2 is the ionised-impurity law.

  16. MCQStandard

    For a non-degenerate n-type semiconductor with acoustic-phonon scattering (τ∝E−1/2), the Hall coefficient is RH=−rH/ne with Hall factor
    1. rH=1
    2. rH=3π/8≈1.18
    3. rH=8/3π≈0.85
    4. rH=315π/512≈1.93
    Answer and solution

    Answer: B

    rH=⟨τ2⟩/⟨τ⟩2 averaged over the Maxwell-Boltzmann distribution. For τ∝E−1/2 this is 3π/8. It is 1 for energy-independent τ and for degenerate metals, and 315π/512 for ionised-impurity scattering (τ∝E3/2).
  17. NATStandard

    For electrons in GaAs (m∗=0.067me) in a field of 10 T, the Landau-level spacing ℏωc is ______ meV (to one decimal place).
    Answer and solution

    Answer: 17.3 (±0.2)

    For free electrons ℏeB/me=0.1158 meV per tesla, i.e. 1.158 meV at 10 T. Dividing by 0.067: ℏωc=17.3 meV, about 200 K in temperature units, so the levels are well resolved at liquid-helium temperature.
  18. MSQStandard

    Which statements about cyclotron resonance in semiconductors are correct?
    1. Experiments are done at low temperature partly to increase τ.
    2. The sense of rotation (circular polarisation absorbed) tells electrons from holes.
    3. The resonant frequency is independent of the effective mass.
    4. A sharp resonance requires ωcτ≫1, i.e. μB≫1.
    Answer and solution

    Answer: A, B, D

    ωcτ=(eB/m∗)(m∗μ/e)=μB; the carrier must complete about a radian before scattering. Cooling suppresses phonon scattering and freezes out carriers that would screen. Electrons and holes circle in opposite senses, so they absorb opposite circular polarisations. ωc=eB/m∗ depends directly on m∗: that is the point of the experiment.
  19. MCQStandard

    A thin, uniform film of arbitrary shape has four small contacts on its edge. Both van der Pauw resistances (current through two adjacent contacts, voltage across the other two) are 10.0 Ω. Its sheet resistance is
    1. 10.0 Ω per square
    2. 31.4 Ω per square
    3. 45.3 Ω per square
    4. 6.93 Ω per square
    Answer and solution

    Answer: C

    Van der Pauw's theorem: e−πRA/Rs+e−πRB/Rs=1. With RA=RB=R, e−πR/Rs=12, so Rs=πR/ln⁡2=4.53R=45.3 Ω per square. The film's shape does not matter, as long as it is uniform, has no holes and the contacts are small and on the edge.

    Why people get this wrong: πR forgets the ln⁡2; the measured four-point resistance is much smaller than the sheet resistance.

  20. NATStandard

    An n-type sample has Hall coefficient RH=−2.5×10−3 m3/C and conductivity 100 S/m (single carrier type, Hall factor 1). The electron mobility is ______ m2/V s (to two decimal places).
    Answer and solution

    Answer: 0.25 (±0.005)

    |RH|=1/(ne) and σ=neμ, so μ=|RH|σ=2.5×10−3×100=0.25 m2/V s. The carrier density is 1/(e|RH|)=2.5×1021 m−3.

    Why people get this wrong: Dividing σ by RH instead of multiplying; check the units: (m3/C)(S/m) = m2/V s.

  21. MSQStandard

    For a Hall measurement on a bar with one type of carrier, which statements are correct?
    1. RH=1/(qn) with q the carrier charge, so n-type samples give a negative Hall coefficient.
    2. At fixed current and field, a thinner bar gives a larger Hall voltage.
    3. The Hall voltage is proportional to the product of the current and the magnetic field.
    4. A more heavily doped bar gives a larger Hall voltage.
    Answer and solution

    Answer: A, B, C

    Balancing qEH=qvB with I=nqvwt gives EH=IB/(nqwt) and VH=EHw=IB/(nqt). So VH∝IB/(nt): thinner is larger, more carriers smaller. RH=EH/(JB)=1/(nq) takes the sign of the carrier charge.

    Why people get this wrong: A thin bar has a smaller cross-section, so the carriers move faster for the same current: larger Hall voltage.

  22. NATExam level

    An intrinsic semiconductor has n=p=1.0×1019 m−3 and mobility ratio μe/μh=3. Its Hall coefficient is ______ m3/C (to three decimal places, with sign).
    Answer and solution

    Answer: -0.312 (±0.003)

    With b=μe/μh and n=p=ni: RH=niμh2(1−b2)eni2μh2(1+b)2=1−b(1+b)eni=−24eni=−0.51.602×10−19×1019=−0.312 m3/C.
  23. MCQExam level

    A p-type sample of a semiconductor with μe>μh is heated from low temperature into the intrinsic range. Its Hall coefficient
    1. stays positive and grows
    2. starts positive, passes through zero and becomes negative
    3. starts negative and becomes positive
    4. stays negative throughout
    Answer and solution

    Answer: B

    At low T holes from acceptors dominate: RH≈+1/pe. As T rises, intrinsic pairs add equal numbers of electrons and holes, but electrons count with μe2. When p=b2n the numerator pμh2−nμe2 vanishes, and above that RH<0. This sign reversal is the fingerprint of p-type material with b>1 (seen in InSb and Ge).
  24. NATExam level

    A p-type semiconductor with acceptor density Na (all ionised, no donors) has μe/μh=3. At the temperature where its Hall coefficient is zero, the ratio ni/Na is ______ (to three decimal places).
    Answer and solution

    Answer: 0.375 (±0.002)

    RH=0 needs p=b2n=9n. Neutrality: p−n=Na, so 8n=Na, n=Na/8, p=9Na/8. Mass action: ni2=np=9Na2/64, giving ni/Na=3/8=0.375.
  25. MSQExam level

    Which statements about transverse magnetoresistance in the relaxation-time model are correct?
    1. With electrons and holes both present, the resistance rises with B.
    2. A compensated material (n=p) shows magnetoresistance that keeps growing as B2 without saturating.
    3. With two carrier types, the Hall coefficient generally depends on B.
    4. A single carrier type with an energy-independent τ shows a large magnetoresistance.
    Answer and solution

    Answer: A, B, C

    One carrier type: the Hall field exactly cancels the Lorentz force, the carriers move straight and ρxx is unchanged. Two types: one Hall field cannot balance both, they drift sideways, and ρxx grows. For n=p the Hall field vanishes and Δρ/ρ0=μeμhB2 forever. In general RH moves from its weak-field to its strong-field value 1/e(p−n).
  26. NATExam level

    The Hall mobility μH=|RH|σ of electrons in a non-degenerate sample dominated by acoustic-phonon scattering is 1400 cm2/V s. Their drift mobility is ______ cm2/V s (to the nearest whole number).
    Answer and solution

    Answer: 1188 (±6)

    RH=−rH/ne and σ=neμ, so μH=rHμ. With rH=3π/8=1.178: μ=1400/1.178=1188 cm2/V s. Treating Hall mobility as drift mobility overestimates it by 18%.
  27. MCQExam level

    Shubnikov-de Haas oscillations of the resistance of a 2D electron gas are periodic in
    1. 1/B, with period Δ(1/B)=2e/hns for spin-degenerate levels
    2. B, with period hns/2e
    3. B2
    4. 1/B2
    Answer and solution

    Answer: A

    A resistance minimum occurs each time an integer number j of spin-degenerate Landau levels is full: ns=j⋅2eBj/h, so 1/Bj=2ej/hns. Successive minima are equally spaced in 1/B by 2e/hns; measuring the spacing gives ns (or in 3D the extremal Fermi-surface area).
  28. NATExam level

    Shubnikov-de Haas minima of a spin-degenerate 2D electron gas are spaced by 0.050 T−1 in 1/B. Its sheet density is ______ ×1015 m−2 (to two decimal places).
    Answer and solution

    Answer: 9.67 (±0.08)

    ns=2ehΔ(1/B)=2×1.602×10−196.626×10−34×0.050=9.67×1015 m−2.

    Why people get this wrong: Leaving out the spin factor 2 halves the density.

  29. MCQExam level

    An n-type semiconductor has donors Nd (ionisation energy Ed) and a smaller density of compensating acceptors Na. At temperatures so low that n≪Na, the electron density varies as
    1. e−Eg/2kBT
    2. e−Ed/2kBT
    3. e−Ed/kBT
    4. e−Eg/kBT
    Answer and solution

    Answer: C

    The acceptors permanently take Na electrons, leaving Na empty donors. Then n(Na+n)/(Nd−Na−n)=12Nce−Ed/kBT (with spin factor) gives n≈Nd−Na2NaNce−Ed/kBT: the full Ed in the exponent, because EF is pinned at the donor level. Without compensation n∝e−Ed/2kBT.

    Why people get this wrong: Ed/2 is the uncompensated result; a little compensation doubles the slope of ln⁡n against 1/T.

  30. NATExam level

    Silicon has density-of-states masses me∗=1.08me and mh∗=0.56me. At 300 K its intrinsic Fermi level lies ______ meV from mid-gap (positive if above, to one decimal place). Take kBT=25.85 meV.
    Answer and solution

    Answer: -12.7 (±0.2)

    Ei−Emid=34kBTln⁡(mh∗/me∗)=0.75×25.85×ln⁡(0.5185)=19.39×(−0.657)=−12.7 meV. The electrons have more effective states, so Ei sits slightly below mid-gap.

← All topics · Timed mock test →