Module 7: Solid state physics · Lesson 7.8 · about 55 min
Semiconductors and the Hall effect
Semiconductors at MSc level: effective densities of states and valley masses, the intrinsic level, freeze-out with and without compensation, the Mott transition, mobility and Matthiessen's rule, the Hall factor, Hall effect with two carriers and its sign change, magnetoresistance, cyclotron resonance, Landau levels, Shubnikov-de Haas oscillations and the integer quantum Hall effect.
Module 7 · about 55 minutes. By the end you will be able to compute carrier densities with the right density-of-states masses, follow an n-type sample from freeze-out to intrinsic behaviour, explain the Mott transition, combine scattering rates, extract carrier type, density and mobility from Hall and magnetoresistance data (with one or two kinds of carrier), and read cyclotron resonance, Shubnikov-de Haas and quantum Hall measurements. Doping, the law of mass action, the Fermi level and the single-carrier Hall effect are in the IIT JAM semiconductors lesson, and junctions in the JAM diodes lesson; bands and effective masses come from lesson 7.7.
1. Counting carriers properly
For a parabolic band, integrating with the Boltzmann tail gives
and the same for holes with . The density-of-states mass must count every valley: for ellipsoidal valleys . Silicon (six valleys, , ) has , while its conductivity mass is . Use the first for , the second for mobility.
Setting puts the intrinsic level slightly off centre:
For silicon (, ) at 300 K, lies 12.7 meV below mid-gap.
- N_c, N_v
- effective densities of states: the number of band-edge states that would give the same n or p; they grow as T3/2
- m_d*
- density-of-states mass, includes valley degeneracy; it sets how many carriers fit near the edge
- m_c*
- conductivity mass, the average of inverse masses; it sets how fast carriers respond
- Physical meaning
- Heavier bands have more states near their edge, so they need less help from the Fermi level to hold the same number of carriers.
2. From freeze-out to intrinsic
Follow an n-type sample (donors , binding energy ) as it warms:
Freeze-out. Most electrons sit on donors. Uncompensated: and as . With a few compensating acceptors and : , the full , because is pinned at the donor level.
Saturation. All donors are ionised: , almost independent of , and drifts down slowly.
Intrinsic. overtakes the doping; against has slope and approaches .
The Mott transition. Hydrogen-like donors have an effective Bohr radius , nanometres instead of 0.05 nm. When donor orbits overlap, at roughly , the electrons no longer freeze out and the semiconductor conducts at . For germanium (, ), nm and cm⁻³.
3. Mobility and the Hall factor
Independent scattering processes add rates (Matthiessen’s rule): . Acoustic phonons give (more phonons, faster carriers); ionised impurities give (fast carriers are deflected less). The total peaks in between.
When depends on energy, the Hall coefficient picks up a factor : . For acoustic-phonon scattering ; for ionised impurities ; for degenerate metals 1. So the Hall mobility overstates the drift mobility: a measured 1400 cm²/V s with phonon scattering means cm²/V s.
4. The Hall effect with one and two kinds of carrier
Current along , field along . Electrons drifting along and holes along are both pushed towards ; the sign of the charge that piles up there, and of the Hall voltage, tells you which carrier you have.
For one carrier, and in a 2D sheet , independent of the sample size. With electrons and holes together, adding the two conductivity tensors gives, at weak field,
Each carrier counts with its mobility squared. Consequences examiners love:
- An intrinsic sample with has .
- A p-type sample heated into the intrinsic range changes the sign of , passing through zero when . With this happens at .
- Holes can outnumber electrons four to one and still give a negative .
Worked example. m⁻³ with , m⁻³ with m²/V s. Numerator ; denominator . m³/C.
Magnetoresistance. With one carrier the Hall field exactly cancels the Lorentz force: no magnetoresistance. With two, it cannot cancel both, and rises; a compensated material () has without limit. In a Corbino disc no Hall field can form at all, and even one carrier gives , a neat way to measure mobility.
5. Quantised orbits: cyclotron resonance, Landau levels and the quantum Hall effect
Carriers circle at . Microwaves at are absorbed (cyclotron resonance), provided the orbit completes before scattering: . With 24 GHz and resonance at 0.30 T, . For an ellipsoidal valley the cyclotron mass depends on direction: with along the valley axis, perpendicular to it.
Quantum mechanically the orbits are Landau levels:
For GaAs at 10 T, meV. The filling factor counts filled levels (per spin).
- Shubnikov-de Haas. As changes, levels pass through and the resistance oscillates periodically in , with for spin-degenerate levels. A spacing of 0.050 T⁻¹ means m⁻².
- Integer quantum Hall effect. In a clean 2D gas at low temperature, whenever lies among localised states between levels, and
to parts in , whatever the sample’s size or impurities. Disorder is needed: it supplies the localised states that make the plateaus wide. On a plateau both and vanish, because the resistivity tensor is not diagonal.
Worked example (Hall bar). A 2D gas gives kΩ at 2.0 T (classical regime) and 25 Ω per square at zero field. Then m⁻² and m²/V s, a high-mobility heterostructure.
“The sign of the Hall coefficient tells you the majority carrier.” Only with one carrier. With two, the more mobile one wins, weighted by .
“Quantum Hall plateaus need a perfect sample.” A perfectly clean sample has no plateaus at all: would jump from one Landau level to the next. Localised states from disorder hold between levels over a range of field.
- , , ; offset .
- Freeze-out slope (uncompensated) or (compensated); Mott .
- Matthiessen ; , ; , for phonons.
- Two carriers: ; sign reversal at ; compensated MR .
- , resonance needs ; Landau levels with states per area per spin.
- SdH period ; quantum Hall , .
Practise: GATE questions on this lesson
They start easy and climb to top-rank level. More on the GATE Physics practice page.
Next: lesson 7.9 turns from orbits to spins. The Hall effect tool converts real Hall data into carrier density and mobility, and the Carrier concentration calculator solves for n, p and E_F at any doping and temperature. Back to the GATE Physics course.
Going on to CSIR NET? The quantum Hall effect and low-dimensional systems takes the Hall effect to two dimensions and strong fields.
Check yourself
Sources
- N. W. Ashcroft and N. D. Mermin, Solid State Physics (1976), chapters 12, 14 and 28
- C. Kittel, Introduction to Solid State Physics, 8th ed. (2005), chapters 8 and 14
- S. M. Sze and K. K. Ng, Physics of Semiconductor Devices, 3rd ed. (2007), chapter 1
- GATE Physics (PH) syllabus, solid state physics section, published by the organising institute each year
Your ticks stay in this browser. Save them as a file on the course home.
Updated 2026-11-22. Not affiliated with the IITs, IISc or the GATE organising institute. The general aptitude part of GATE is not covered here. Check the official GATE website for the current pattern. All questions are original.